Quick Setup Guide
1300mA AC Adapter Set with USB Port NS-AC1200 / NS-AC1200-C
|
2
Check the voltage of your device, then slide the
voltage selector on your adapter to the same
voltage. Do not use this adapter if your device’s
voltage is not between 3 and 12V DC.
OR
If you are using a USB connection, slide the voltage
selector to 5V.
If you are using a USB connection, see“Using your
adapter.”
Check out these important
safety instructions to keep
yourself and your devices safe.
Package contents
Choosing a tip
BE
Carefully test the tips by gently inserting them into the
DC jack of your device. Choose a tip that fits snugly, but
do not force it to fit.
Note: If you have your old adapter, you can compare the
connector of the old adapter to the available tips.
•
•
•
Universal AC adapter
7 adapter tips
Quick Setup Guide
CAREFUL!
Warning: Identifying the correct voltage and polarity settings
and adjusting the product is the user’s responsibility.
Features
• This adapter should only be used with a 120V power
outlet. Follow all necessary safety precautions.
• Not recommended for use by children.
• Failure to adjust the adapter settings to match your
connected device’s requirements can result in damage
to the device.
Voltage
selector
Setting up your adapter
You can find your device’s input, polarity, and voltage on
the device itself, on its old adapter, or in its manual.
Contact the manufacturer if you cannot find this
information. Using incorrect settings could damage your
device.
3
Power
indicator
OR
Check the polarity of the device you are connecting
to your adapter.
• If your device has a positive polarity, connect the
chosen tip to the adapter’s connector.
Connector
USB port
Power
cord
1
Check the input of the device you are connecting to
your adapter. If connecting a device using one of the
included tips, do not use this adapter if your device
requires more than 1300mA (1.3A) of current. If you
are connecting a USB device, do not use this adapter
if your device requires more than 2100mA (2.1A) of
current.
Compatibility
Your device is compatible with this adapter if:
• The correct tip is available
• Your device’s voltage is between 3 and 12V DC
• Your device’s input does not require more than
1300mA (1.3A) of current (or 2100mA (2.1A) for 5V
connection)
POSITIVE POLARITY
OR
Tips
• If your device has negative polarity, do NOT use this
adapter to power your device.
• Your device has a positive polarity
Before using your new product, please read
these instructions to prevent any damage.
|