Wireless Keyboard and
Optical Mouse Bundle
Enjoy web surfing and total media control
with 19 smart hot keys
User Manual
F8E839ukBNDL
98uk_F8E839ukBNDL_man.indd
1
15/10/04 5:47:17
TABLE OF CONTENTS
Introduction
Compatible Equipment
1
2
2
2
3
4
5
7
8
Operating Systems
Package Contents
Quick Installation Guide for PS/2 Connection
Software Installation for Windows 98, Me, 2000, and XP
Troubleshooting
Uninstallation process for Windows 98, Me, 2000, and XP
Information
98uk_F8E839ukBNDL_man.indd
3
15/10/04 5:47:17
98uk_F8E839ukBNDL_man.indd
4
15/10/04 5:47:17
INTRODUCTION
Congratulations and thank you for purchasing the Wireless Keyboard
and Optical Mouse bundle from Belkin. We appreciate your business
and are sure you will enjoy years of reliable use with these high-
quality, input devices. Please review this entire User Manual
so you can be sure to get the most reliable performance from your
new equipment.
1
98uk_F8E839ukBNDL_man.indd
1
15/10/04 5:47:17
INTRODUCTION
Compatible Equipment
Works with all PCs that are compatible with IBM® and equipped with
PS/2 interface
NOTE: Use of these products on a desk made of iron, or other
metal, will negatively impact the operation of your Wireless
Keyboard and Mouse.
Operating Systems
Windows XP, Me, 2000, 98 SE, 95
Package Contents
Wireless Keyboard
Wireless Optical Mouse
Receiver
4 AA batteries
User Manual
Driver CD
Please read the instructions for installing, operating, and using
the wireless desktop.
2
98uk_F8E839ukBNDL_man.indd
2
15/10/04 5:47:17
QUICK INSTALLATION GUIDE FOR
PS/2 CONNECTION
1. Be sure that your computer is powered off.
2. Connect the receiver to your computer’s PS/2 port. The receiver
has a 2-head connector for the Keyboard and Mouse connections
(purple is for the Keyboard and the USB connection; the green is
for the Mouse). There is also an illustration on the top connector
to identify them. If your computer does not use the same color
scheme, match the plug with the illustration next to the port.
3. Install the batteries into your Keyboard and Mouse. Please make
sure you follow the indication on the inside compartment for
correct positioning of the batteries.
4. Power on your computer.
5. To set up the wireless mouse and keyboard links, press the
connection button on the receiver. Then press the connection
button on the mouse that is located on the bottom and hold for
several seconds. Press the connection button on the keyboard
(located under the foot of the keyboard) and hold for several
seconds. The indicator light on the receiver will flash until the
channel has been selected. When the indicator light stops flashing,
your keyboard and mouse will be operational.
3
98uk_F8E839ukBNDL_man.indd
3
15/10/04 5:47:17
SOFTWARE INSTALLATION FOR
WINDOWS 98, ME, 2000, AND XP
Note: The Keyboard and Mouse should now be functioning.
If they are not, repeat the setup instructions and refer to the
“Troubleshooting” section for help. When the Mouse and
Keyboard are operational, the software can be installed.
Warning: It is recommended that you uninstall any previously installed
keyboard and mouse software prior to installing your
new Belkin software.
1. Be sure your computer is powered on.
2. Insert the CD into your computer’s CD-ROM drive.
3. If you have not previously installed Keyboard and Mouse software,
click “OK” and the installation will begin. Follow the on-screen
instructions.
4. Upon completion of installation, you will be prompted to restart
your computer. You must restart at this time in order for the
software to function.
5. The setting icons of the keyboard and mouse will appear on
the taskbar of windows - Double click the icons to set the
programmable mouse button and the keyboard hot key functions.
4
98uk_F8E839ukBNDL_man.indd
4
15/10/04 5:47:17
TROUBLESHOOTING
The Keyboard and/or Mouse is/are not detected or do not
work after installation.
• Make sure the receiver cables are plugged into the computer’s PS/2
port.
• For optimal performance, place the receiver at least eight inches
(20cm) away from the computer monitor, the computer, any external
storage devices, or other electrical devices.
• Make sure you have properly installed the batteries. Test the
batteries to make sure they are not dead (you can do this by
installing them into another device).
• You may have other system devices that are conflicting with the
Mouse and/or the Keyboard. Check the IRQ/address setting of
these devices for conflicts and change the settings as required.
Please refer to your computer documentation or the manufacturer’s
technical support for assistance in making these changes.
• Make sure you have properly established communication/
synchronization between the receiver and the Mouse and Keyboard.
5
98uk_F8E839ukBNDL_man.indd
5
15/10/04 5:47:17
TROUBLESHOOTING
• If your Mouse pointer becomes choppy on-screen or the Keyboard
does not register keystrokes, replace batteries swith a fresh set.
• When multiple wireless keyboard and mouse sets are used in a
close proximity, interference might occur. You can solve this by
changing the communication channel of your keyboard and mouse.
• To change the channel of the wireless keyboard and mouse, press
the connection button on the receiver. Then press the connection
button on the mouse that is located on the bottom and hold for
several seconds. Press the connection button on the keyboard
(located under the foot of the keyboard) and hold for several
seconds. The indicator light on the receiver will flash until the new
channel has been selected.
6
98uk_F8E839ukBNDL_man.indd
6
15/10/04 5:47:17
UNINSTALLATION PROCESS FOR
WINDOWS 98, ME, 2000, AND XP
1. Select “Setting”.
2. Select “Control Panel”.
3. Select “Add/Remove Programs”.
4. Select “Belkin Wireless Driver,” then click on “Add Remove”.
5. You will be asked if you are sure if you want to remove the selected
application and all of its components. Click on “Yes”.
The uninstall process will begin. Follow the on-screen instructions to
complete the process.
7
98uk_F8E839ukBNDL_man.indd
7
15/10/04 5:47:17
INFORMATION
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under
our sole responsibility that the product,
F8E839ukBNDL
to which this declaration relates,complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility, that the F8E832-BNDL to
which this declaration relates, is in conformity with EN55022, EN61000-3-2, EN61000-3-3,
and EN55024.
Caution: Exposure to Radio Frequency Radiation.
The radiated output power of this device is far below the FCC radio frequency exposure
limits. Nevertheless, the device shall be used in such manner that the potential for human
contact normal operation is minimized.
When connecting an external antenna to the device, the antenna shall be placed in such
a manner to minimize the potential for human contact during normal operation. In order to
avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity
to the antenna shall not be less than 20cm (8inches) during normal operation.
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed
and used in accordance with the instructions, it may cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try and correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
8
98uk_F8E839ukBNDL_man.indd
8
15/10/04 5:47:18
INFORMATION
Modifications
The FCC requires the user to be notified that any changes or modifications to this device that
are not expressly approved by Belkin Components may void the users authority to operate
the equipment.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for
its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product
at no charge provided it is returned during the warranty period, with transportation charges
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse,
or misapplication; if the product has been modified without the written permission of Belkin;
or if any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF
ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN
SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
No Belkin dealer, agent, or employee is authorised to make any modification, extension, or
addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO, LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO OR REPROGRAMMING OR REPRODUCING ANY PROGRAM OR
DATA STORED IN, OR USED WITH, BELKIN PRODUCTS.
Some states do not allow the exclusion or limitation of incidental or consequential damages
or exclusions of implied warranties, so the above limitations of exclusions may not apply to
you. This warranty gives you specific legal rights, and you may also have other rights that
vary from state to state.
9
98uk_F8E839ukBNDL_man.indd
9
15/10/04 5:47:18
INFORMATION
Canada- Industry Canada (IC)
The wireless radio of this device complies with RSS 139 & RSS 210 Industry Canada.
This Class B digital complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Europe-European Union Notice
Radio products with the CE 0560 or CE alert marking comply
with the R&TTE Directive (1995/5/EC) issued by the Commission
of the European Community.
Compliance with this directive implies conformity to the following
European Norms (in brackets are the equivalent international standards).
• EN 60950 (IEC60950) – Product Safety
• EN 300 328 Technical requirement for radio equipment
• ETS 300 826 General EMC requirements for radio equipment.
To determine the type of transmitter, check the identification label
on your Belkin product.
Products with the CE marking comply with the EMC Directive (89/336/EEC) and the
Low Voltage Directive (72/23/EEC) issued by the Commission of the European Community.
Compliance with these directives implies conformity to the following European Norms
(in brackets are the equivalent international standards).
• EN 55022 (CISPR 22) – Electromagnetic Interference
• EN 55024 (IEC61000-4-2,3,4,5,6,8,11)- Electromagnetic Immunity
• EN 61000-3-2 (IEC610000-3-2) - Power Line Harmonics
• EN 61000-3-3 (IEC610000) – Power Line Flicker
• EN 60950 (IEC60950) – Product Safety
Products that contain the radio transmitter are labeled with CE 0560 or CE alert marking
and may also carry the CE logo.
10
98uk_F8E839ukBNDL_man.indd 10
15/10/04 5:47:18
11
98uk_F8E839ukBNDL_man.indd 11
15/10/04 5:47:19
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220-5221 • USA
Tel: +1 310 898 1100
Fax: +1 310 898 1111
Belkin Ltd.
Express Business Park
Shipton Way • Rushden
NN10 6GL • United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin B.V.
Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin GmbH
Hanebergstrasse 2
80637 Munich • Germany
Tel: +49 (0) 89 143405 0
Fax: +49 (0) 89 143405 100
Belkin SAS
5 Rue du Petit Robinson
3ème étage
78350 Jouy en Josas • France
Tel: +33 (0) 1 34 58 14 00
Fax: +33 (0) 1 39 46 62 89
Belkin Tech Support
Europe: 00 800 223 55 460
US: 877 736 5771
© 2004 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
P74598uk
98uk_F8E839ukBNDL_man.indd 12
15/10/04 5:47:20
|