Setup for XP Users
Make sure you have the
following package contents:
1. Insert the Belkin driver-installation CD into your CD-ROM drive.
After a few moments, the setup application should appear on
your computer screen.
5. Once this process is complete, unplug and remove the mini-USB cable from the
Hub and computer. This cable is needed only on the first installation. Store the USB
cable for another computer installation if desired.
Note: If the setup application does not appear, double-click “My
Computer”, and then click your CD-drive icon. This will load the
setup-applications main page.
6. Connect the Wireless USB Adapter to your computer’s USB port.
Windows will automatically find and load drivers to complete installation (Fig. 3).
Fig. 3
2. Click “Install driver” and follow the prompts to complete the
software-install process.
3. a. Connect the power supply to the Hub.
b. Attach the mini-USB cable to the mini-USB port on the side of the Hub
and the other end to your computer’s built-in USB port (Fig. 1). This will
allow your computer to recognize the Hub.
Wireless Wireless USB Adapter Stand
USB Hub Adapter
Power
Supply
(optional)
Fig. 1
(A)
(B)
Laptop setup or desktop
7. Plug your USB devices into the Hub and access them wirelessly (Fig. 4).
Mini-USB Cable Installation
(A to Mini-B) CD
Quick
Installation
Guide
Fig. 4
Connect the
power supply
Connect
mini-USB cable
4. Wait approximately one minute for security to become enabled. A
prompt will indicate that the security setup is complete (Fig. 2).
Now you can print, play music, scan, download photos and burn CDs from anywhere
in the same room, up to 30 feet away, without the hassle of connecting cables. With
the Belkin Wireless USB Hub, you have the freedom to roam and stay connected.
Fig. 2
Up to 30 ft. in the same room
Package Contents
1
Setup for XP Users
2
Setup for XP Users
3
|