April 2010
JPM816A-HD
JPM820A-HD
Category 6 High-Density Feed-Through Patch Panels
Provide patching without punching down the
wires to the ports.
Meet CAT6 specifications.
Install in relay racks or communications cabinets.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
Customer
Support
Information
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 •
Category 6 High-Density Feed-Through Patch Panels
4. When using the shielded High-Density Feed-Through Patch Panels, make sure to attach the necessary drain wires. Use one
drain wire for each shielded module on the patch panel. Attach the drain wire in either of the two places as shown in Figure
3-1. Connect the other end of the drain wire to proper ground.
Lower right view
Top left view
Figure 3-1. Drain wire installation options for shielded models.
5. Use cable ties to secure the cables to the cable management bar. See Figure 3-2.
Figure 3-2. Completed installation.
We‘re here to help! If you have any questions about your application
or our products, contact Black Box Tech Support at 724-746-5500
or go to blackbox.com and click on “Talk to Black Box.”
You’ll be live with one of our technical experts in less than 20 seconds.
Page 3
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com.
About Black Box
Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything
from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by
free, live 24/7 Tech support available in 20 seconds or less.
© Copyright 2010. All rights reserved.
724-746-5500 | blackbox.com
|