Radio / DVD / CD / MP3 / WMA
Las Vegas DVD35
7 645 650 310
Operating instructions
CONTROLS
1
Button to switch the device on/
off and operate the volume
mute feature.
OFF button on the remote con-
trol for switching the device off.
9
:
Buttons 1 - 6.
AUD•DEQ button (Audio).
Short press: Sets bass, treble,
balance, fader and X-bass.
Long press: Calls up the equal-
izer menu.
2
button to open the flip-re-
lease control panel.
;
SRC button to switch sources
between CD/DVD, Tuner, CD
changer (if connected) and
AUX.
3
4
Volume control.
BND•TS button.
Short press: Selects the FM
memory banks and the MW
and LW wavebands.
Long press: Starts the FM Trav-
elstore function.
<
=
SETUP button to call up the
setup menu of the DVD player.
MENU button to call up the
main menu (root menu) of a
DVD.
5
6
7
DIS•ESC button to change the
display contents, to close the
menus without saving changes.
>
ENTER button to confirm menu
entries on DVDs and in the set-
up menu.
Arrow buttons on the remote
control and the device with
identical function.
?
@
MUTE button to mute the de-
vice.
MENU•OK button
buttons to start the fast
forward/reverse search, to con-
trol slow-motion in DVD mode.
Short press: Calls up the men-
us for basic settings and con-
firms menu entries. Confirms
menu entries in DVD menus.
Long press: Starts the scan
function.
A
B
button to start and interrupt
(freeze frame) the DVD play-
back.
GOTO button for direct selec-
tion of playing time or title on a
CD/DVD, selecting playing time,
chapter or title on a DVD.
8
TRAF button to switch traffic in-
formation standby on/off.
68
CONTROLS
C
D
E
DISPLAY button to display
playing time information on the
external display.
M
N
O
P
AUDIO button to select the au-
dio track of a DVD.
SUB-T button to select the sub-
titles of a DVD.
ANGLE button to select a cam-
era perspective (dependent
upon the DVD).
STOP button to interrupt the
playback.
TV MODE button to switch the
TV standard of the DVD player
to adjust to the external display.
button for up and down
track selection in CD mode and
to select the previous or next
chapter in DVD mode, single-
frame search in DVD mode.
F
G
H
ZOOM button to zoom the im-
age area in/out.
DIMMER button to directly call
up the display menu.
Q
RETURN button to change
back one level in the menu of a
DVD.
AUDIO ONLY button
No function
R
S
TITLE button to call up the title
menu of a DVD.
I
J
PBC button, playback control.
Numeric keys for direct selec-
tion of chapters and playing
time in DVD mode or MP3
mode.
PLAY MODE button for setting
the repeat mode (REPEAT) of a
CD or DVD.
K
L
PROGRAM button to program
the playlist of a CD or DVD.
button to eject a CD from the
device (visible only with opened
control panel).
A-B button to define and repeat
a self-defined title of a DVD/CD.
69
CONTENTS
Scanning receivable stations
Notes and accessories ......... 73
Road safety................................. 73
Installation.................................... 73
Remote control RC 14 H ............. 73
Installations
(not part of the scope of delivery) ... 74
Activating/deactivating
demo mode.................................. 74
Time-out (time window) ................ 74
(SCAN)........................................ 83
Setting the scanning time............. 83
Programme type (PTY) ................ 83
Optimising radio reception ........... 85
SHARX ........................................ 85
Configuring the display ................ 85
Activating/deactivating the radio
text display ................................... 86
Traffic information ................ 86
Switching traffic information
priority on/off ............................... 86
Setting the volume for traffic
Detachable control panel ..... 75
Theft protection............................ 75
Detaching the control panel ......... 75
Attaching the control panel .......... 76
announcements............................ 87
Switching on/off ................... 76
DVD operation ...................... 87
Region code ................................ 87
License ........................................ 88
Switching to DVD mode............... 88
Starting playback ......................... 88
Display ......................................... 89
Fast forward/reverse search ........ 89
Slow motion ................................. 90
Single frame................................. 90
Freeze frame................................ 90
Interrupting playback ................... 90
Skipping a chapter ....................... 90
Repeated playback of a DVD title. 91
Direct selection of a chapter ........ 91
Resuming playback at the start
Adjusting the volume............ 77
Setting the power-on volume........ 77
Quickly reducing the volume
(Mute) .......................................... 78
Telephone audio/navigation audio ..78
Setting the volume of the
confirmation beep ........................ 79
Automatic sound .......................... 80
Radio mode........................... 80
Switching to radio mode .............. 80
Convenient RDS functions
(AF, REG) .................................... 80
Selecting the waveband /
memory bank ............................... 81
Tuning into a station ..................... 81
Setting the sensitivity of
station seek tuning ....................... 82
Storing stations ............................ 82
Storing stations automatically
of the first title of a DVD ............... 92
Displaying subtitles ...................... 92
Selecting the playback language.. 93
Changing the camera perspective .. 93
Zooming in/out of an image area .. 93
Traffic announcements in
(Travelstore) ................................. 82
Listening to stored stations .......... 83
DVD mode ................................... 94
70
CONTENTS
Programming your favourite track
with the remote control .............. 107
Traffic announcements in
CD mode ................................... 108
Ejecting a CD ............................ 108
DVD menu............................. 94
Displaying the DVD menu ............ 94
Selecting menu entries ................ 95
Exiting the DVD menu .................. 95
Displaying the title menu .............. 95
Playback of DVD audio ................ 95
Repeated playback of a defined
section of a title............................ 95
Programming your favourite track
with the remote control ................ 96
MP3/WMA mode ................. 109
Preparing an MP3/WMA CD ..... 109
Switching to MP3 mode............. 110
Setting the display
(internal display)......................... 111
Selecting the directory
on the device ............................. 111
Selecting a track on the device .. 112
Selecting a directory/track
with the remote control .............. 112
Fast search ................................ 113
Random track play – MIX ........... 113
Scanning tracks – SCAN ........... 114
Repeated playback of individual
tracks or entire directories –
DVD setup............................. 97
Calling up the setup menu ........... 97
Performing settings in the setup
menu............................................ 97
General Setup - general settings . 97
Audio Setup ................................. 98
Video Setup - image settings ....... 99
Preferences - preferred settings 100
Setting password protection -
Assigning a password................ 102
Exiting the setup menu ............... 102
REPEAT ..................................... 114
Repeated playback of a defined
section of a title.......................... 114
Interrupting playback (PAUSE)... 115
Selecting MP3 info .................... 115
Displaying scrolling texts (scroll) ...115
CD mode ............................. 103
Switching to CD mode............... 103
Selecting tracks ......................... 103
Direct track selection with the
remote control............................ 104
Fast track selection.................... 104
Fast searching (audible)............. 104
Random track play (MIX)............ 105
Scanning tracks (SCAN) ........... 105
Repeating tracks (REPEAT) ....... 105
Repeated playback of a defined
section of a title.......................... 106
Interrupting playback (PAUSE)... 106
Changing the display ................. 106
Displaying CD text ..................... 107
71
CONTENTS
CD-changer mode .............. 116 Equalizer ............................. 122
Switching to CD-changer mode . 116 Switching the equalizer on/off .... 122
Selecting CDs ........................... 116 Selecting sound presets ............ 123
Selecting tracks ......................... 116 Selecting vehicle presets ........... 123
Fast searching (audible)............. 116 Manually adjusting the equalizer . 124
Changing the display ................. 116 Help adjusting the equalizer ....... 125
Repeating individual tracks or
Adjusting the display
whole CDs (REPEAT) ................ 117
settings ............................... 126
Random track play (MIX)............ 117
Adjusting the display brightness. 126
Scanning all tracks on all CDs
Adjusting the viewing angle........ 126
(SCAN)...................................... 117
External audio sources ....... 127
Switching the AUX input on/off .. 127
Naming CDs .............................. 118
CLOCK time ........................ 119
Displaying the time..................... 119
Setting the clock automatically ... 119
Setting the clock manually ......... 119
Selecting 12/24-hour
Amplifier/sub-out ............... 128
Switching the internal amplifier
on/off ......................................... 128
Switching the dual zone on/off ... 128
clock mode ................................ 120
Displaying the time continuously
when the device is off and the
TMC for dynamic navigation
systems............................... 129
Specifications ..................... 129
Amplifier .................................... 129
Tuner.......................................... 129
DVD ........................................... 129
CD ............................................. 129
Pre-amp out ............................... 129
Input sensitivity .......................... 129
ignition is on............................... 120
Sound.................................. 121
Adjusting the bass ..................... 121
Adjusting the treble .................... 121
Setting the left/right volume
distribution (balance).................. 121
Adjusting the front/rear volume
distribution (fader)...................... 121
X-BASS ............................... 122
72
NOTES AND ACCESSORIES
Notes and accessories
Thank you for choosing a Blaupunkt
product. We hope you enjoy using this
new piece of equipment.
Note that due to road safety, the driv-
er should be viewing videos only
while the vehicle is standing.
Installation
Please read these operating instruc-
tions before using the equipment for
the first time.
If you want to install your car sound
system yourself, please read the instal-
lation and connection instructions that
follow these operating instructions.
The Blaupunkt editors are constantly
working on making the operating in-
structions clearer and easier to under-
stand. However, if you still have any
questions on how to operate the de-
vice, please contact your dealer or the
telephone hotline for your country. You
will find the telephone number printed
at the back of this booklet.
Remote control RC 14 H
When you operate the Las Vegas
DVD35 for the first time, you must in-
sert the batteries in the remote con-
trol.
Inserting the batteries
1. Open the battery compartment by
removing the cover.
We provide a manufacturer guarantee
for our products bought within the Eu-
ropean Union. You can view the guar-
or ask for them directly at:
2. Battery size: Two AAA batteries,
type LR03 Micro.
Before inserting the batteries, en-
sure that the poles of the battery
are aligned as shown in the bat-
tery compartment.
Blaupunkt GmbH
Hotline
Robert Bosch Str. 200
D-31139 Hildesheim
Insert the batteries.
3. Close the battery compartment.
Road safety
Note:
Exhausted batteries do not belong
in household waste; they should
be disposed of according to local
regulations.
Road safety has absolute
priority. Only operate your car sound
system if the road and traffic
conditions allow you to do so.
Familiarise yourself with the device
before setting off on your journey.
You should always be able to hear
police, fire and ambulance sirens in
good time from inside your vehicle.
For this reason, listen to your car
sound system at a suitable volume
level during your journey.
73
NOTES AND ACCESSORIES
●
External display
Activating the remote control
An external display is required to
view DVD movies and VCDs. You
can obtain further information
about suitable monitors from your
Blaupunkt dealer.
Point the remote control at the infrared
receiver in the front of the device.
Operating angle: Approx. 30° in each
direction from the front side of the IR
receiver in the front of the device.
●
●
Amplifiers
You can use all Blaupunkt and Ve-
locity amplifiers.
The accompanying remote control al-
lows for operating all the functions of
the DVD mode and controlling the ba-
sic functions of the other operating
modes.
CD changers
You can connect the following
Blaupunkt CD changers:
You cannot switch the device on/off us-
ing the accompanying remote control.
CDC A 03, CDC A 08 and
IDC A 09.
Installations
(not part of the scope of delivery)
Activating/deactivating demo
mode
You can activate the demo mode at the
device. In demo mode, the different
functions of the device are displayed.
Use only accessories approved by
Blaupunkt.
●
Remote controls
The RC 10 steering wheel remote
control allows you to access the
most important functions of your
car sound system safely and con-
veniently from your steering
wheel.
➮ Press the MENU•OK button 7.
The display shows the menu.
➮ Press and hold the MENU•OK
button 7 pressed for more than
four seconds while the menu is
displayed to activate or deactivate
the demo mode.
You cannot switch the device on/
off using the remote control.
The RC 13 H cable remote control
and the corresponding adapter al-
lows for controlling the RSA (Rear
Seat Entertainment) in the dual
zone mode. You can obtain further
information from your Blaupunkt
dealer.
Time-out (time window)
The device features a time-out func-
tion.
For example, if you press the
MENU•OK button 7 and select a
menu item, the device switches back
after approx. 16 seconds after the last
button activation. The settings per-
formed are saved.
74
CONTROL PANEL
Detaching the control panel
Detachable control panel
➮ Press the
button 2.
Theft protection
The control panel opens out towards
you.
The device is equipped with a detach-
able control panel (flip-release panel)
as a way of protecting your equipment
against theft. The device is worthless
to a thief without this control panel.
➮ Hold the control panel by its right
side and then pull it straight out of
the bracket.
Protect your device against theft by
taking the control panel with you when-
ever you leave your vehicle. Do not
leave the control panel inside your ve-
hicle - not even in a hiding place.
The control panel has been designed
to be easy to use.
Notes:
Notes:
● All the current settings are saved.
●
Never drop the control panel.
● Any inserted DVD/CD remains in
●
Never expose the control panel
to direct sunlight or other heat
sources.
the device.
● The device switches off automati-
cally after approx. one minute.
●
Avoid direct skin contact with the
control panel’s electrical contacts.
If necessary, please clean the
contacts of the KeyCard with a
lint-free cloth moistened with
cleaning alcohol.
75
CONTROL PANEL
SWITCHING ON/OFF
Attaching the control panel
Switching on/off
➮ Hold the control panel at approxi-
There are various ways of switching the
device on/off:
mately right angles to the device.
➮ Slide the control panel into the de-
vice’s guides that are positioned
on the left and right at the lower
edge of the housing. Push the
control panel carefully into the
bracket until it clicks into place.
Switching on/off using the vehicle
ignition
The device will switch on/off simulta-
neously with the ignition if the device
is correctly connected to the vehicle’s
ignition and you did not switch the de-
vice off by pressing button 1.
➮ Flip up the control panel and care-
fully press it into the device until it
clicks into place.
Switching the device on/off using
the detachable control panel
➮ Detach the control panel.
The device switches off automatically
after approx. one minute.
2.
➮ Attach the control panel again.
1.
The device switches on. The last set-
ting (radio, DVD/CD, CD changer or
AUX) will be reactivated.
Note:
When attaching the control panel,
make sure you do not press the
display.
Switching on/off using button 1
➮ To switch on the device, press but-
ton 1.
If the device was still switched on when
you detached the control panel, it will
automatically switch on with the last
setting activated (radio, DVD/CD, CD
changer or AUX) when the panel is
replaced.
➮ To switch off the device, press and
hold down button 1 for longer
than two seconds.
The device switches off.
Note:
To protect the vehicle battery, the
device will switch off automatically
after one hour if the ignition is off.
76
SWITCHING ON/OFF
ADJUSTING THE VOLUME
Adjusting the volume
Switching the device off with the
remote control
Note:
The device can also be switched off
using the supplied RC 14 H remote
control.
The internal amplifier can be
switched off. If the loudspeakers
do not emit any sound, please
read the section entitled “Switch-
ing the internal amplifier on/off”
in the “Amplifier” chapter.
➮ Press the OFF button 1 on the
remote control.
The device switches off.
You can adjust the volume in steps from
0 (off) to 50 (maximum).
To increase the volume,
➮ turn the volume control 3 clock-
wise.
To decrease the volume,
➮ turn the volume control 3 coun-
terclockwise.
Adjusting the volume with the
remote control
The volume can also be adjusted us-
ing the supplied remote control.
➮ To increase the volume, press the
VOL+ button 3 on the remote
control.
➮ To decrease the volume, press the
VOL- button 3 on the remote
control.
Setting the power-on volume
You can set the default volume level at
which the device plays when it is
switched on.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VOLUME MENU”
appears on the display.
77
ADJUSTING THE VOLUME
➮ Press the MENU•OK button 7
Quickly reducing the volume
(Mute)
to display the volume menu.
“ON VOLUME” and the currently set
value are displayed or “LAST VOL-
UME” is displayed.
You can quickly reduce the volume to
a preset level (Mute).
➮ Briefly press button 1.
➮ Adjust the power-on volume using
“MUTE” appears on the display.
the
buttons 6.
Cancelling mute
To help you adjust the setting more
easily, the device will increase or de-
crease the volume as you make your
changes.
To return to your previously set volume
level,
➮ briefly press button 1 again.
If you change the setting to “LAST
VOLUME”, the volume when the de-
Muting with the remote control
vice switches on will be the same as The volume can also be muted using
the volume level that was set the last the supplied remote control.
time you switched the device off.
➮ Press the MUTE button ? on the
remote control.
Danger to hearing!
If the power-on volume is set to
“MUTE” appears on the display.
maximum, the volume level can be
very high when the device is
To return to your previously set volume
switched on.
Cancelling mute
level,
If the volume was set to maximum
➮ press the MUTE button ? again.
before the device was switched off
and the power-on volume is set to
“LAST VOLUME”, the volume level
can be very high when the device is
switched on again.
Severe damage to your hearing can
be caused in both cases!
Telephone audio/navigation
audio
If your car sound system is connected
to a mobile telephone or a navigation
system, the sound system’s volume will
be muted as soon as you “pick up” the
phone or as soon as a navigation an-
nouncement is made. You will then hear
the caller or navigation announcement
over the car sound system’s loud-
speakers. In order for this feature to
work, the mobile telephone or naviga-
tion system must be connected to the
car sound system as described in the
installation instructions.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
78
ADJUSTING THE VOLUME
You will need a cable for this with the Note:
following Blaupunkt number:
7 607 001 503.
You can use the volume control
3 to adjust the volume of tele-
phone calls and navigation an-
nouncements whilst you are lis-
tening to them.
You can find out from your Blaupunkt
dealer which navigation systems can
be used with your car sound system.
If the sound system receives a traffic
announcement during a telephone call
or whilst a navigation announcement is
being made, you will only be able to hear
the traffic announcement after the call
or navigation announcement is finished
(in so far as the traffic announcement is
still being broadcast). The traffic an-
nouncement is not recorded!
Setting the volume of the
confirmation beep
The system will output a confirmation
beep for some functions if you keep a
button pressed down for longer than
approx. two seconds, for instance,
when assigning a radio station to a sta-
tion preset button. You can adjust the
volume of this beep.
The volume with which telephone calls
or navigation announcements are
broadcast can be adjusted.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “VOLUME MENU”
appears on the display.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VOLUME MENU”
appears on the display.
➮ Press the MENU•OK button 7
to display the volume menu.
➮ Press the or button 6
repeatedly until “BEEP VOL”
appears on the display.
➮ Press the MENU•OK button 7
to display the volume menu.
➮ Press the or button 6
repeatedly until “TEL/NAVI” appears
on the display.
➮ Adjust the volume using the
buttons 6. “0” means that the
beep is deactivated, “6” means that
the maximum beep volume is set.
➮ Set your preferred volume level
using the
buttons 6.
When you have finished making your
changes,
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
79
ADJUSTING THE VOLUME
RADIO MODE
Automatic sound
Radio mode
This feature automatically adjusts the
volume of the car sound system to suit
the speed at which the vehicle is trav-
elling. In order for this to work, your car
sound system must be connected as
described in the installation instruc-
tions.
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears on the dis-
play as soon as the tuner receives it.
You can adjust the automatic volume
boost feature in six steps from (0 to 5).
Switching to radio mode
To start the radio mode,
➮ press the BND•TS button 4
or
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VOLUME MENU”
appears on the display.
➮ press the SRC button ; on the
device or the SOURCE button ;
on the remote control repeatedly
until “TUNER” appears on the dis-
play.
➮ Press the MENU•OK button 7
to display the volume menu.
➮ Press the or button 6
repeatedly until “AUTO SOUND”
appears on the display.
Convenient RDS functions
(AF, REG)
➮ Set the volume adjustment level
using the
buttons 6.
When you have finished making your
changes,
The convenient RDS functionsAF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
●
AF: If the RDS function is activat-
ed, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
Note:
The optimum setting for the speed-
dependent volume adjustment fea-
ture depends on how noise levels
develop in your particular vehicle.
You will need to test various set-
tings in order to find out which is
best suited to your vehicle.
●
REGIONAL: At certain times,
some radio stations divide their
programme into regional pro-
grammes providing different con-
tent. You can use the REG func-
tion to prevent the car radio from
switching to alternative frequen-
cies that are transmitting different
programme content.
80
RADIO MODE
Note:
REGIONAL must be activated/de-
Selecting the waveband /
memory bank
activated separately in the menu.
This device can receive programmes
broadcast over the FM frequency range
as well as the MW and LW (AM) wave-
bands. There are three memory banks
available for the FM waveband (FM1,
FM2 and FMT) and one for each of the
MW and LW wavebands.
Switching REGIONAL on/off
➮ Press the MENU•OK button 7.
“TUNER MENU” appears on the dis-
play.
➮ Press the MENU•OK button 7 to
display the tuner menu.
Five stations can be stored in each
memory bank.
➮ Press the or button 6
repeatedly until “REG” appears
on the display. “OFF” or “ON” is
displayed alongside “REG”.
To switch between the FM memory
banks (FM1, FM2 and FMT) and the
MW and LW wavebands,
➮ To switch REGIONAL on/off, press
the or button 6.
➮ briefly press the BND•TS button
4.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Tuning into a station
There are various ways of tuning into
a station.
Switching the RDS function on/off
Automatic station seek tuning
If you want to use the RDS functions
(AF and REGIONAL),
➮ Press the or button 6.
➮ press the MENU•OK button 7.
The radio tunes into the next receiva-
ble station.
“TUNER MENU” appears on the dis-
play.
Tuning into stations manually
➮ Press the MENU•OK button 7 to
You can also tune into stations manually.
display the tuner menu.
Note:
“RDS ON” or “RDS OFF” appears on
the display.
You can only tune into stations
manually if the RDS function is
deactivated.
➮ To switch RDS on/off, press the
or button 6.
➮ Press the or button 6.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
The convenient RDS functions are ac-
tive if the RDS appears on the display.
81
RADIO MODE
ity setting. “SENS LO1” means it is set
to the lowest sensitivity setting.
Browsing through broadcasting
networks (only FM)
➮ Set the sensitivity level that you
If a radio station provides several pro-
grammes, you have the option of
browsing through its so-called “broad-
casting network”.
want using the
buttons 6.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Note:
The RDS function must be activat-
ed before you can use this feature.
➮ Press the or button 6 to
switch to the next station on the
broadcasting network.
Note:
You can set different sensitivity
levels for FM and MW or LW (AM).
Note:
Storing stations
When using this feature, you will
only be able to switch to stations
that you have received previously.
To receive the stations, use the
Scan or Travelstore function.
Storing stations manually
➮ Select the memory bank that you
want (FM1, FM2, FMT) or one of
the wavebands (MW or LW).
➮ Tune into the station that you
Setting the sensitivity of station
seek tuning
want.
➮ Press and hold down one of the
station buttons 1 - 6 9 for longer
than two seconds to assign the
station to that button.
You can choose whether the radio
should only tune into stations provid-
ing good reception or whether it can
also tune into those with a weak re-
ception.
Storing stations automatically
(Travelstore)
➮ Press the MENU•OK button 7.
“TUNER MENU” appears on the dis-
play.
You can automatically store the six sta-
tions offering the strongest reception
in the region (FM only). The stations
are stored in the FMT memory bank.
➮ Press the MENU•OK button 7 to
display the tuner menu.
Note:
➮ Press the or button 6
repeatedly until “SENS” appears
on the display.
Any stations that were previously
stored in this memory bank are
deleted in the process.
The display shows the currently set
sensitivity level. “SENS HI3” means that
the tuner is set to the highest sensitiv-
➮ Press and hold down the BND•TS
button 4 for longer than two sec-
onds.
82
RADIO MODE
The storing procedure begins. “TRAV-
EL STORE PLEASE WAIT” appears
on the display. After the process has
completed, the radio will play the sta-
tion that is stored in memory location
1 of the FMT memory bank.
Setting the scanning time
➮ Press the MENU•OK button 7.
“TUNER MENU” appears on the dis-
play.
➮ Press the or button 6 re-
peatedly until “VARIOUS MENU”
appears on the display.
Listening to stored stations
➮ Select the memory bank or wave-
➮ Press the MENU•OK button 7 to
display the menu. „SCAN TIME“
and the currently set time are dis-
played.
band.
➮ Press the station button 1 - 6 9
of the desired station.
➮ Set the scanning time that you
Scanning receivable stations
(SCAN)
You can use the scan function to play
all the receivable stations briefly. You
can set the scanning time from 5 to 30
seconds in the menu in increments of
five seconds.
want using the
buttons 6.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Note:
Starting SCAN
The defined scanning time is also
applied by the system to scanning
carried out in DVD/CD and CD-
changer mode.
➮ Press and hold down the
MENU•OK button 7 for longer
than two seconds.
Scanning begins. “SCAN” appears
briefly on the display followed by a dis-
play of the current station name or fre-
quency.
Programme type (PTY)
Besides transmitting the station name,
some FM stations also provide infor-
mation on the type of programme that
they are broadcasting. Your car radio
can receive and display this informa-
tion.
Cancelling SCAN and continuing
listening to a station
➮ Press the MENU•OK button 7.
Scanning stops and the radio contin-
ues playing the station that it tuned into
last.
For example, the programme types can
be:
CULTURE
SPORT
ROCK
TRAVEL
NEWS
JAZZ
POP
CLASSICS
83
RADIO MODE
You can use the PTY function to se- ➮ Press the or button 6 to
lect stations of a particular programme
type.
switch PTY ON or OFF.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
PTY-EON
If you specify the programme type and
start seek tuning, the radio will switch
from the current station to a station of
the selected programme type.
Selecting a programme type and
starting seek tuning
➮ Press the or button 6.
Notes:
The programme type that you select-
ed last appears on the display.
●
If the tuner does not find a station
that corresponds to the selected pro-
gramme type, you will hear a beep
and “NO PTY” appears briefly on the
display. The radio will then retune to
the station that it received last.
➮ If you want to select another pro-
gramme type, you can do so by
pressing the or button 6
whilst this display is visible.
Or
●
If the tuned radio station or another
station on the broadcasting net-
work broadcasts your selected pro-
gramme type at a later point in
time, the radio will automatically
switch from the currently tuned sta-
tion or from DVD/CD or CD-chang-
er mode to the station whose pro-
gramme type matches the one you
selected.
➮ Press one of the buttons 1 - 6 9
to select a programme type that is
assigned to one of these buttons.
The selected programme type appears
briefly in the display.
➮ Press the or button 6 to
start seek tuning.
The radio will then tune into the next
station that it finds that corresponds to
your selected programme type.
Switching PTY on/off
➮ Press the MENU•OK button 7.
Assigning a programme type to a
station button
“TUNER MENU” appears on the dis-
play.
➮ Select a programme type using
the or button 6.
➮ Press the MENU•OK button 7 to
display the tuner menu.
➮ Press and hold the desired station
button 1 - 6 9 for longer than two
seconds.
➮ Press the or button 6 re-
peatedly until “PTY” appears on
the display with the current setting.
The programme type is stored on the
selected button 1 - 6 9.
84
RADIO MODE
Switching SHARX on/off
Optimising radio reception
➮ Press the MENU•OK button 7.
Treble reduction feature during
interference (HICUT)
“TUNER MENU” appears on the dis-
play.
The HICUT function improves recep-
tion during poor radio reception (only
FM). If reception interferences are
present, the interference level is auto-
matically reduced.
➮ Press the MENU•OK button 7 to
display the tuner menu.
➮ Press the or button 6 re-
peatedly until “SHARX” appears
on the display.
Switching HICUT on/off
➮ Press the or button 6 to
➮ Press the MENU•OK button 7.
switch SHARX on/off.
“TUNER MENU” appears on the dis-
play.
„SHARX OFF“ means automatic band-
width switching is deactivated, “SHARX
ON” means it is activated.
➮ Press the MENU•OK button 7 to
display the tuner menu.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
➮ Press the or button 6 re-
peatedly until “HICUT” appears on
the display.
Configuring the display
In radio mode, you can choose
between various display modes.
➮ Press the or button 6 to ad-
just the HICUT setting.
“HICUT 0” means that no automatic
reduction of the interference level will
be made; “HICUT 2” means that a
maximum reduction will be made.
1. “NORMAL MODE”
First line: Memory bank and sta-
tion name (if it can be received)
Second line: Frequency of the se-
lected station or radio text (if acti-
vated).
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
2. “CLOCK MODE”
SHARX
First line: Memory bank and sta-
tion name (if it can be received)
Second line: Frequency of the se-
lected station or radio text (if acti-
vated) and time.
The SHARX function allows you to
largely avoid interference caused by
neighbouring radio stations (FM only).
Switch on the SHARX function if the
density of radio stations in your area is
very high.
3. “MINIMAL MODE”
First line: Memory bank and sta-
tion name (if it can be received)
Second line: No display.
85
RADIO MODE
TRAFFIC INFORMATION
Traffic information
Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
➮ Briefly press the DIS•ESC button
5 to switch between the options.
Activating/deactivating the
radio text display
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Some stations use the RDS signal to
broadcast scrolling texts known as ra-
dio texts. You can allow radio texts to
be displayed or you can block them.
Since displaying radio texts can distract
you from the current road and traffic
situation, we ask you kindly to deacti-
vate the “radio text” function or to use it
only whilst the vehicle is stationary.
Once the traffic report has been played,
the system will switch back to the pro-
grammethatyouwerelisteningtobefore.
➮ Press the MENU•OK button 7.
Switching traffic information
priority on/off
➮ Press the TRAF button 8.
“TUNER MENU” appears on the dis-
play.
➮ Press the MENU•OK button 7 to
The priority for traffic announcements
is activated if the display shows the traf-
fic jam symbol.
display the tuner menu.
➮ Press the or button 6 re-
peatedly until “R-TEXT” appears
on the display.
Notes:
You will hear a warning beep:
➮ Press the or button 6 to
●
If you leave the reception area of
a traffic information station that
you are currently listening to.
switch RADIOTEXT on/off.
“R-TEXT OFF” means that no radio
texts will be displayed and “R-TEXT
ON” means they will be displayed.
●
If you leave the reception area of
a traffic information station that the
system is tuned into while listening
to a DVD/CD or a CD in the
changer, and the subsequent au-
tomatic search cannot find a new
traffic information station.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
●
If you retune the radio from a traffic
information station to a station that
does not broadcast traffic information.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
86
TRAFFIC INFORMATION
DVD OPERATION
Setting the volume for traffic
announcements
➮ Press the MENU•OK button 7.
DVD operation
Risk of severe damage to the
DVD/CD drive!
Mini DVDs/CD singles with a diam-
eter of 8 cm and non-circular con-
toured DVDs/CDs (shape CDs)
must not be used.
We accept no responsibility for any
damage to the DVD/CD drive that
may occur as a result of the use of
unsuitable DVDs/CDs.
➮ Press the or button 6 re-
peatedly until “VOLUME MENU”
appears on the display.
➮ Press the MENU•OK button 7 to
display the volume menu.
➮ Press the or button 6 re-
peatedly until “TRAFFIC” appears
on the display.
Region code
Code Region
➮ Adjust the volume using the
buttons 6.
1
NorthAmerica, incl. the US and
Canada.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
2
Japan, Europe (excl. Eastern
Europe), Middle East, South
Africa.
Note:
Using the volume control 3, you
can also adjust the volume during
a traffic announcement for the du-
ration of that announcement.
3
4
Korea and South-East Asia.
Oceania incl. Australia, New
Zealand, Central and South
America.
5
India, Eastern Europe, Africa,
and Russia.
6
China.
All
regions.
The Las Vegas DVD35 and the DVDs
are labelled with the region code that
is applicable for the pertinent country.
This device is permanently set to the
region code that is valid for the country
in which it was sold.
Playing a DVD with a different region
code is not possible.
87
DVD OPERATION
This device can be used to play the ➮ Gently insert the DVD with its
following data carriers/data formats:
printed side pointing up into the
drive until you feel some resist-
ance.
●
DVD video and DVD audio. DVD-
MP3/WMA
The drive draws in the DVD automati-
cally.
●
●
Video CD (VCD).
MP3/WMA CDs, see the chapter
“MP3/WMA mode”.
You must not hinder or assist the drive
as it draws in the DVD.
●
Audio CDs, see the chapter “CD
mode”.
➮ Gently close the control panel
whilst exerting a little pressure un-
til you feel it click into place.
License
Manufactured under license of Dolby
Laboratories. “Dolby”, “Pro Logic” and
the double-D symbol are trademarks
of Dolby Laboratories.
The DVD data are loaded.
Dependent upon the inserted DVD, the
playback starts or the DVD menu dis-
plays.
This product contains technologies that
are copyright-protected under certain
US-American patents. The copyrights
are property of Macrovision Corpora-
tion and other copyright owners. The
use of this copyright-protected technol-
ogy must be approved by Macrovision
Corporation and is intended exclusively
for private use and other presentations
in a limited scope, unless Macrovision
Corporation first issued a respective
permission.
If a DVD is already inserted in the
drive,
➮ press the SRC button ; on the
device or the SOURCE button ;
on the remote control repeatedly
until “DVD” appears on the display.
Playback begins from the point at which
it was last interrupted.
Starting playback
After the desired DVD/VCD is loaded,
either the DVD menu is displayed or
the playback starts. This action is de-
pendent upon the inserted DVD.
Switching to DVD mode
If there is no DVD inserted in the
drive,
➮ Press the button A or move
the selection mark to the menu
item that starts the movie, and
press the ENTER button > to
start the playback.
➮ switch on the device by pressing
button 1.
➮ Press the button 2.
The control panel opens.
The DVD starts playing.
88
DVD OPERATION
Showing/changing the display
information
Display
Different information about the playing
time can be shown on the connected
display. The display can be hidden.
➮ Press the DISPLAY button C on
the remote control repeatedly until
the desired information is dis-
played.
The following displays are available:
●
●
●
●
TITLE ELAPSED
The display information is shown at the
top edge of the display.
Example: TITLE 01/12 CHAP-
TER 08/26 01 : 26 : 14: The first
of twelve titles and the eighth of
26 chapters of this title is playing.
Next to it is the time elapsed of the
current title.
Hiding the display information
➮ Press the DISPLAY button C
repeatedly until DISPLAY OFF
displays briefly and the display in-
formation is hidden.
TITLE REMAIN
Example: TITLE 01/12 CHAP-
TER 08/26 00 : 31 : 58: The first
of twelve titles and the eighth of
26 chapters of this title is playing.
Next to it is the time remaining of
the current title.
Fast forward/reverse search
You can fast forward or reverse the
DVD at 2x, 4x, 8x, 16x and 32x the
speed (dependent upon the DVD;
some DVDs can only be played up to
16x the speed).
CHAPTER ELAPSED
Example: TITLE 01/12 CHAP-
TER 08/26 00 : 01 : 34: The first
of twelve titles and the eighth of
26 chapters of this title is playing.
Next to it is the elapsed playing
time of the current chapter.
To fast forward or reverse search the
DVD,
➮ press the
or
@ button on
the remote control repeatedly until
the desired speed is displayed.
Stopping fast forward/reverse
search
CHAPTER REMAIN
Example: TITLE 01/12 CHAP-
TER 08/26 00 : 05 : 22: The first
of twelve titles and the eighth of
26 chapters of this title is playing.
Next to it is the remaining playing
time of the current chapter.
To stop fast forward,
➮ press the button A on the
remote control.
The DVD is played back at normal
speed.
89
DVD OPERATION
Slow motion
Freeze frame
The DVD can be played forward or ➮ During playback, press the but-
reverse at reduced speed.
ton A on the remote control or
the button 6 9 on the device.
➮ First, press the button A on
the remote control.
The playback is interrupted and shown
as a freeze frame.
➮ Press the SLOW button @
once or several times on the remote
control for forward slow motion
Continuing playback
To continue the playback
or
➮ press the button A on the re-
➮ the SLOW button @ for
mote control or the button 6
9
reverse slow motion.
on the device.
After pressing the SLOW
/
but-
Interrupting playback
➮ Press the button O on the re-
ton @ several times, the playback is
switched to half the regular speed
(1/2).
mote control.
The playback is interrupted, the start
screen of the device and the text
“PRESS PLAY TO CONTINUE” are
displayed.
With every additional press of the but-
ton, the speed is reduced further (1/4,
1/8 and 1/16).
To play the DVD at regular speed
again,
Continuing playback
➮ press the button A on the re-
➮ press the button A on the re-
mote control.
mote control.
Playback is continued again.
Single frame
You can stop the movie of a DVD and
watch it in single frames.
Skipping a chapter
A title of the DVD can be divided into
several smaller chapters.
➮ First, press the button A on
the remote control.
To jump to the next or another chapter,
➮ Press the STEP button P on
the remote control once or several
times to display the next frames
➮ press the button P once or
several times on the remote con-
trol.
or
The playback jumps to the beginning
of the next or the corresponding follow-
ing chapter.
➮ press the STEP button P to
display the previous frames.
90
DVD OPERATION
To jump to the beginning of the current
or a previous chapter,
Cancelling repeat
If you want to cancel the repeat func-
tion,
➮ press the button P once or
several times on the remote con-
trol.
➮ press the PLAY MODE button
J on the remote control repeat-
edly until the repeat symbol is no
longer shown on the display.
The playback jumps to the beginning
of the current or the corresponding pre-
vious chapter.
Direct selection of a chapter
Repeated playback of a DVD
title
A DVD is divided into different titles and
chapters, which can be selected on an
individual basis.
The remote control can also be used
to directly select a chapter or a specif-
ic position (playing time).
Selecting a chapter
To directly select a chapter,
Repeated playback of a chapter or
title
➮ press the GOTO button B on the
remote control.
To repeat the current chapter,
The external display shows the GOTO
menu.
➮ press the PLAY MODE button J
on the remote control.
➮ Move the selection mark with the
buttons of the remote control
6 to “CHAPTER”.
The display shows the repeat symbol
and “CHAPTER”.
➮ Press the ENTER button > on the
To repeat the current title,
remote control.
➮ press the PLAY MODE button J
on the remote control a second
time.
➮ Enter the three-digit number of the
desired chapter using the numeric
buttons 0 to 9 S on the remote
control and press the ENTER but-
ton >.
The display shows the repeat symbol
and “TITLE”.
To repeat the entire DVD,
Playback is continued at the desired
position.
➮ press the PLAY MODE button J
on the remote control a third time.
To exit the GOTO menu and continue
with full playback,
The display shows the repeat symbol
and “ALL”.
➮ press the GOTO button B on the
remote control.
91
DVD OPERATION
Selecting the playing time
Resuming playback at the start
of the first title of a DVD
You can directly select a specific posi-
tion on the DVD by specifying the play-
ing time of this position either in the
chapter or in the title.
➮ Press the
button A on the re-
mote control.
Playback resumes at the start of the
title.
To jump to a specific position,
➮ press the GOTO button B on the
Note:
remote control.
For most DVDs, this is the main
menu (root) of the DVD.
The external display shows the GOTO
menu.
Displaying subtitles
To display subtitles,
➮ Move the selection mark with the
buttons of the remote control
6 to “TT TIME” to set the abso-
lute playing time in the title, or to
“CH TIME” to set the playing time
of the current chapter.
➮ press the SUB-T button N on
the remote control.
The display information appears. The
number of languages available for sub-
titles and the current language are dis-
played next to “SUBTITLE”.
➮ Press the ENTER button > on the
remote control.
➮ Enter the desired position in
hours, minutes and seconds using
the numeric buttons 0 to 9 S on
the remote control.
To change the language of the subti-
tles,
➮ press the SUB-T button N once
or several times until the subtitles
are displayed in the desired lan-
guage.
Playback is continued at the desired
position.
To exit the GOTO menu and continue
with full playback,
Note:
You can also determine in the
menu of the DVD whether and in
which language subtitles are dis-
played (see DVD menu).
➮ press the GOTO button B on the
remote control.
92
DVD OPERATION
Note:
Selecting the playback
language
You can specify in the setup menu
that a camera symbol is shown if
additional camera perspectives are
available. For further details, read
the section “Displaying the camera
perspective” in the “Setup” chapter.
To select the playback language,
➮ press the AUDIO button M once
or several times on the remote
control.
The display information is shown. The
number of the language, the number
of available playback languages and
the current language are shown.
Zooming in/out of an image
area
You can enlarge a freely selectable
section of the movie being played up
to 4 times or reduce it to one-fourth.
Note:
You can also select the playback
language in the menu of the DVD
(see DVD menu).
To enlarge the image area,
➮ press the ZOOM button F once
or several times on the remote
control.
Changing the camera
perspective
There are DVDs that offer two or
more different camera perspectives
for a scene.
Every time you press the button, the
central image area is enlarged incre-
mentally.Available zoom levels are 2x,
3x and 4x.
The number of the current camera per-
spective and the number of possible
camera perspectives is shown in the
display information next to the camera
symbol.
Note:
After setting the desired zoom,
you can freely move the image
area with the arrow buttons 6 of
the remote control.
To change the camera perspective,
Reducing the image area
➮ press the ANGLE button D on
After the maximum zoom is reached,
the image is reduced with each press
of the ZOOM button F in increments
of 1/2, 1/3 and 1/4.
the remote control.
The scene is shown from the next cam-
era perspective. The display informa-
tion is shown.
93
DVD OPERATION
Deactivating zoom in/out
DVD menu
To continue viewing the movie without
zoom,
The DVD menu is offered by the insert-
ed DVD. If you insert a DVD and play-
back starts, the DVD menu automati-
cally appears on the screen.
➮ press the ZOOM button F on
the remote control repeatedly until
the image is displayed without
zoom in/out.
Note:
The selection options offered by
the DVD menu are dependent
upon the respective DVD.
Traffic announcements in DVD
mode
If you wish to receive traffic announce-
ments in DVD mode,
The DVD menu of a DVD can offer the
following:
●
You can select from different lan-
guages for the playback or the
subtitles.
➮ press the TRAF button 8.
The priority for traffic announcements
is activated if the device display shows
the traffic jam symbol. For further de-
tails, please read the chapter entitled
“Traffic information”.
●
In addition to the actual movie,
you can also view the trailer that
was used in movie theatres or on
television to promote the movie or
view the “Making of ...” of the movie.
●
A movie is divided into several se-
quential chapters. You can select a
chapter and directly start the play-
back in the chapter without first
having to “fast forward” to the cor-
responding position like you have
to with a video cassette.
Displaying the DVD menu
You can end the playback at any time
and display the menu of the DVD.
➮ Press the MENU button = on
the remote control.
94
DVD OPERATION
Selecting menu entries
Playback of DVD audio
DVDs generally provide menus in
which you can select among different
options, such as “Start movie”, “Chap-
ter selection”, etc.
This device can also be used to play
DVD audio. The functions described
above can be used provided that the
DVD supports them.
To switch between the individual menu
entries,
The following functions are particularly
useful for DVD audio.
➮ press one of the arrow buttons
Repeated playback of a defined
section of a title
/
6 on the remote con-
trol.
You can use the remote control to de-
fine a section of a title and repeat it
endlessly in a loop.
To confirm a menu entry,
➮ press the ENTER button > on
the remote control.
Note:
Exiting the DVD menu
This function is operable only if an
external display is connected.
When you make a corresponding se-
lection in the DVD menu, e.g. the play-
back of the movie, you automatically
leave the DVD menu and the playback
starts.
To define the starting point of the sec-
tion,
➮ listen to a title and press the A-B
button L on the remote control at
the point where you want the re-
peat function to start.
Displaying the title menu
You can also call the title menu directly
to conveniently select the individual ti-
tles/chapters:
To define the ending point of the sec-
tion,
➮ listen to the title again and press
the A-B button L on the remote
control again at the point where
you want the repeat function to
end.
➮ Press the TITLE button R on the
remote control.
The title menu appears.
Note:
This function is not supported by
all DVDs.
The section of the title is repeated until
you press the A-B button L again.
95
DVD OPERATION
Stopping the playlist
Programming your favourite
track with the remote control
To end a running playlist,
In DVD mode, you can use the remote
control to program a playlist of up to
20 of your favourite tracks of the cur-
rent DVD. The playlist is deleted when
you remove the DVD or when you stop
the playlist and exit the programming
mode.
➮ press the PROGRAM button K
on the remote control.
The programming mode is displayed.
The selection mark is positioned on
“STOP”.
To end the playback of the playlist,
➮ press the ENTER button >.
Note:
This function is operable only if an
external display is connected.
Note:
You can also edit the playlist by
moving the selection mark to indi-
vidual memory locations and en-
tering a different title with the nu-
meric buttons.
Defining and starting a playlist
➮ Press the PROGRAM button K
on the remote control.
The programming mode is displayed.
The number of available titles on the
DVD is displayed and the selection
mark (green) is positioned at memory
location 1.
➮ Enter the first title and the chapter
of your playlist with the numeric
buttons 0 to 9 S.
Note:
After entering the title, the chap-
ters available for this title are dis-
played.
The selection mark moves to the next
memory location.
➮ Enter the next titles and chapters
of your playlist with the numeric
buttons 0 to 9 S.
If your playlist should have fewer than
twenty titles,
➮ move the selection mark with the
arrow buttons 6 to “START” and
press the ENTER button >.
96
DVD OPERATION
➮ Confirm your entries with the EN-
TER button > on the remote
control.
DVD setup
The setup of the device offers a varie-
ty of options to customise the device.
If you want to perform additional set-
tings in other sections of the menu:
Calling up the setup menu
To call up the setup menu,
➮ Press the button 6 of the re-
mote control or the button 6 on
the device to return to the selec-
tion of the menu sections.
➮ press the SETUP button < on
the remote control.
Performing settings in the
setup menu
The setup menu is divided into five
sections: General Setup,Audio Setup,
Video Setup, Preference Page and
Password Setup.
To exit the setup menu,
➮ press the SETUP button < on
the remote control.
General Setup - general
settings
➮ Select one of the five sections in
the setup menu using the buttons
6 of the remote control or
In the general settings, you can define
the type of connected display, display
a symbol if more than one camera per-
spective is available, switching captions
on and off, and set the priority for au-
dio or video DVDs.
the arrow buttons on the device.
➮ Confirm your entry with the EN-
TER button > on the remote
control.
Selecting the monitor setting
The selection mark (yellow) is dis-
played and positioned on the first en-
try of the selected menu.
The setting of the monitor is performed
under the “TV Display” menu item.
The following monitor settings are avail-
able:
➮ Select the desired menu item us-
ing the buttons
6 of the re-
● Normal/LB: The DVD player is
connected to a 4:3 monitor. The
wide image is displayed on the
screen at full width with black bars
at the top and bottom edge of the
screen.
mote control or the arrow buttons
on the device.
➮ Confirm your entries with the EN-
TER button > on the remote
control.
➮ Perform your settings using the
● Normal/PS: The DVD player is
connected to a 4:3 monitor. The
wide image is displayed using the
full height of the screen. The left
and right edge of the wide image
is automatically cut off.
buttons
6 of the remote
control or the arrow buttons on the
device.
97
DVD OPERATION
●
WIDE: The DVD player is con-
nected to a 16:9 monitor. The
wide image is displayed on the
screen at full size.
Audio Setup
The Audio Setup allows you to control
the SPDIF output of the device, set the
PCM channel and set the sampling rate
of the LPCM output. In addition, you
can control the Dynamic Range Con-
trol (DRC) and the HDCD filter.
Displaying the camera perspective
You can specify that a camera symbol
is shown if more than one camera per-
spective is available on the DVD. For
this purpose, select the setting “ON”.
SPDIF setting
For the SPDIF output of the device, you
can select whether an SPDIF-RAW
signal, an SPDIF-PCM signal a manu-
ally controlled signal should be output
or that the SPDIF output should be
switched off.
The setting of the camera perspective
is performed under the “Angle Mark”
menu item.
Displaying captions
Captions are special subtitles that can-
not be switched on/off using the subtitle
functionofaDVD.Youcanusethismenu
to switch these subtitles on or off. Se-
lect the setting “Off” to switch it off.
Select the desired setting under
“SPDIF Output”.
Notes:
●
The SPDIF output is not muted for
traffic announcements, incoming
telephone calls and navigation
voice output.
DVD/DVD audio priority
DVD audio generally contains audio
data in two versions:
●
The audio data of the DVD drive
are output via the SPDIF output.
One high-resolution uncompressed
variant and one compressed variant
(e.g. in DTS or Dolby Digital).
PCM channel
The SPDIF output can be used to out-
put the PCM data in the “L/R”, “LS/RS”
or “C/LFE” mode.
The respective setting can be per-
formed under “PCM Channel” in the
“SPDIF Output”.
Here you can define whether you want
to listen to high-resolution audio data
or to compressed audio data.
Select the “DVDAudio” setting for high-
er quality or “DVD Video” for the com-
pressed version.
The setting of the priority is performed
under the “Priority” menu item.
98
DVD OPERATION
Setting the LPCM
Brightness
This device can be used to output a You can adjust the brightness in incre-
linear PCM signal (LPCM) with a sam- ments from -20 to +20.
pling rate of 48 K, 96 K or 192 K.
The setting for brightness is located in
The LPCM setting is located under “Quality” under “Brightness”.
“LPCM OUT” in the “SPDIF Setup”.
Contrast
Dolby Digital Setup - Dynamic
Range Control
You can adjust the contrast in incre-
ments from -16 to +16.
Dynamic Range Control means that
the difference between “loud” and “soft”
sounds is adjusted. The volume of soft
sounds is increased and that of loud
sounds is lowered. You can use the
DRC of the device to set the dynamics
of a Dolby programme in increments
from “OFF” to “Full”. Select the “FULL”
setting for full dynamic adjustment.
The setting for contrast is located in
“Quality” under “Contrast”.
Gamma correction
You can adjust the gamma correction
for playback on TFT displays. You can
select among the settings “High”, “Me-
dium”, “Low”, and “None”.
The setting for gamma correction is
located in “Quality” under “Gamma”.
The setting of DRC is located under
“Dynamic” in the “Dolby Digital Setup”.
Colour
Setting the HDCD filter
You can adjust the colour in increments
from -9 to +9.
If you play HDCD-DVDs or CDs (High
Definition Compatible Digital), you can
select a filter.
The setting for colour is located in
“Quality” under “Hue”.
Select the desired filter under “HDCD”.
Colour saturation (for NTSC only)
Video Setup - image settings
You can adjust the colour saturation in
In the Video Setup, you can perform increments from -9 to +9.
different settings for an optimal image
The setting for colour saturation is lo-
cated in “Quality” under “Saturation”.
playback on the connected display.
Adjusting picture sharpness
Luminance (for NTSC only)
To adjust the picture sharpness, you
can select among the settings “High”,
“Medium” and “Low”.
You can select the settings “0T” and
“1T” for luminance.
The setting for luminance is located in
“Quality” under “Luma Delay”.
The setting for picture sharpness is lo-
cated in “Quality” under “Sharpness”.
99
DVD OPERATION
Note:
The television standard can also
Preferences - preferred
settings
be switched using the remote con-
trol. Press the TV-Mode button E
repeatedly until the desired televi-
sion standard is displayed.
Under “Preferences”, you can set the
television standard of the external dis-
play, switch PBC on and off, set the
preferred playback language, select
the preferred language for subtitles, set
the parental control, set the region, and
reset the device.
Switching playback control on/off
If the Playback Control (PBC) function
is switched off, the titles and chapters
of a VCD/SVCD are played in ascend-
ing order. With PBC on, the VCD/
SVCD is played with the predefined
menus and in logical order.
To call up the preferred settings,
➮ press the button O on the
remote control twice.
➮ Press the SETUP button < on
The setting for PBC is located under
“PBC”.
the remote control.
➮ Select "Preferences Page" using
the buttons
control or the arrow buttons on the
device.
6 of the remote
Selecting the playback language
You can preselect the preferred play-
back language of the DVD. If the se-
lected language is available on the
DVD, the playback starts with the pre-
set language.
➮ Confirm your entry with the EN-
TER button > on the remote
control.
The setting of the playback language
is performed under the “Audio” menu
item.
Setting the colour television
standard of the TV device
For a perfect image quality, set the col-
our television standard on the device Selecting the language of subtitles
which is used by the attached monitor.
You can preselect the preferred lan-
“PAL” is the standard used in Europe,
“NTSC” is the standard for the Ameri-
can/Asiatic region.
guage for subtitles. If the selected lan-
guage for subtitles is available on the
DVD, the subtitles are displayed in the
preset language.
If you select the “MULTI” setting, the
standard of the DVD is used for the
output.
The setting of the subtitles is performed
under the “Subtitle” menu item.
The setting of the television standard
is performed under the “TV TYPE”
menu item in the menu “Preferences
Page”.
100
DVD OPERATION
4 PG 13: Accompanying adult is sug-
gested, not suitable for children under
the age of 13.
Selecting the language for the DVD
menu
You can preselect the preferred lan-
guage for the menus of the DVD. If the
selected language for menus is avail-
able on the DVD, the menus of the
DVD are displayed in the preset lan-
guage.
5 PG-R: Only for adolescents accom-
panied by an adult. Prohibited for chil-
dren, contents includes violence, ob-
scene language, etc.
6 R: Prohibited for adolescents, con-
tents includes violence, obscene lan-
guage, etc.
The setting of the language for the DVD
menu is performed in the “Disc Menu”
menu item.
7 NC 17: Contents not suitable for ad-
olescents under the age of 17.
Parental control
8 ADULT: Contents for adults only: Vi-
olence, sex, etc.
You can secure the device against un-
authorised use by assigning a pass-
word. In addition, you can specify a
rating level.
Notes:
● Some blocked DVDs can be re-
leased directly at the start with
YES (ENTER) and the password.
Others require you to change the
rating level in the setup before the
playback of the DVD. This action is
dependent upon the DVD.
Rating level means that some DVDs
are equipped with a code that de-
fines the age-appropriate release.
If you set a rating level that is lower than
the one found on the inserted DVD, it
can be played only after entering the
password.
● If you activated password protec-
tion, the age-appropriate release
can only be changed after enter-
ing the password. For further de-
tails, please read the section “Acti-
vating/deactivating password pro-
tection”.
Note:
Not all DVDs support the Rating
Level function.
In the menu you can define which mov-
ies can be played. These ratings follow
the recommendations of the Motion
PictureAssociation ofAmerica (MPAA).
The setting for the parental control can
be performed in the “Parental” menu
item.
The following options can be selected:
1 KID SAF: Approved for children
2 G: Approved for children
3 PG:Accompanying adult during play-
back is suggested.
101
DVD OPERATION
The password is changed in the “Pass-
word” menu. To change the password,
you must first enter the current pass-
word with the numeric buttons S and
then enter the new password twice.
Resetting the device
You can reset the device, thereby de-
leting all, personal setting (including the
self-defined password) and re-estab-
lish the basic factory settings.
After you have entered the correct
password and entered the new pass-
word twice, the entry marking automat-
ically switches to “OK”.
Resetting the device is performed in
the “Default” menu item.
Setting password protection -
Assigning a password
Note:
You can activate the password protec-
tion for the device. With activated pass-
word protection, you can change the
age-appropriate release/parental con-
trol only after entering the password.
If you forgot your password, you
can use the master code 136900
and assign a new password.
Exiting the setup menu
To exit the setup menu,
Activating/deactivating password
protection
➮ press the SETUP button < on
the remote control.
The password protection can be acti-
vated (ON) or deactivated (OFF) in the Or
“Password Mode” menu. To change the
➮ Select “Exit Setup Menu” using
the buttons 6 of the remote
setting, you must enter the current
password using the numeric buttons
S.
control or the arrow buttons on the
device.
If you have not yet entered a password,
use the preset password 000000.
➮ Confirm your entry with the EN-
TER button > on the remote
control.
After you have entered the correct
password, the entry marking automat-
ically switches to “OK”.
Changing the password
You can change the preset password
and define your own. The password
must have six digits. To change the
password, you must first enter the old
password. If you have not yet assigned
a password, use the preset password
000000.
102
CD MODE
Switching to CD mode
CD mode
If there is no CD inserted in the drive,
You can use this device to play stand-
ard audio CDs, CD-Rs and CD-RWs
with a diameter of 12 cm. To avoid prob-
lems when playing CDs, you should not
burn CDs at speeds greater than 16x.
➮ switch on the device by pressing
button 1.
➮ Press the button 2.
The control panel opens.
To ensure proper functioning, use only
CDs with the Compact-Disc logo.
Copy-protected CDs can cause play-
back problems. Blaupunkt cannot guar-
➮ Gently insert the CD with its print-
ed side uppermost into the drive
until you feel some resistance.
antee the proper functioning of copy- The drive draws in the CD automati-
protected CDs!
cally.
You must not hinder or assist the drive
as it draws in the CD.
Besides being able to play audio CDs
on this device, you can also play CDs
containing MP3 music files and DVDs. ➮ Gently close the control panel
For further details, please read the
chapters “MP3 mode” and “DVD
mode”.
whilst exerting a little pressure un-
til you feel it click into place.
The CD starts playing.
Risk of severe damage to the
DVD/CD drive!
If a CD is already inserted in the
drive,
CD singles with a diameter of 8 cm
and non-circular contoured CDs
(shape CDs) must not be used.
We accept no responsibility for any
damage to the DVD/CD drive that
may occur as a result of the use of
unsuitable DVDs/CDs.
➮ press the SRC button ; on the
device or the SOURCE button ;
on the remote control repeatedly
until “DISC” appears on the dis-
play.
Playback begins from the point at which
it was last interrupted.
Selecting tracks
➮ Press one of the arrow buttons 6
to select the next or previous
track, or press the or button
P on the remote control.
If you press the or button 6 or
P once, the current track is played
again.
103
CD MODE
After entering the time, the playback is
continued at the desired position.
Direct track selection with the
remote control
In CD mode, you can directly select
tracks with the remote control or se-
lect a specific playing time on the CD
or in the current track.
Selecting the playing time in the
current track
➮ Press the GOTO button B re-
peatedly until the external display
shows “TRACK GO TO”.
Note:
This function is operable only if an
external display is connected.
➮ Enter the desired playing time in
the minute-second format where
you want the playback in the track
to start using the numeric buttons
S.
Track selection
➮ Enter the number of the desired
track directly using the numeric
buttons 0 to 9 S of the remote
control.
After entering the time, the playback is
continued at the desired position.
After entering the number, the desired
track begins to play.
Fast track selection
To quickly select tracks backwards or
forwards,
Or
➮ Press the GOTO button B re-
peatedly until the external display
shows “SELECT TRACK”.
➮ press and hold down one of the
/
buttons 6 until fast-reverse/
fast-forward track selection begins.
➮ Enter the number of the desired
track using the numeric buttons 0
to 9 S, e.g. 0 2 for the second or
1 2 for the twelfth track.
Fast searching (audible)
To fast search backwards or forwards,
➮ press and hold down one of the
buttons 6 until fast searching
backwards/forwards begins.
After entering the number, the desired
track begins to play.
Fast searching with the remote
control
Selecting the playing time on the
CD
You can perform a fast searching with
different speeds (2x, 4x, 8x, 16x, and
32x) with the remote control.
➮ Press the GOTO button B re-
peatedly until the external display
shows “DISC GO TO”.
Note:
➮ Enter the desired playing time in
the minute-second format where
you want the playback to start us-
ing the numeric buttons S.
The search speed is shown on an
external display (optional equip-
ment).
104
CD MODE
For fast searching forwards
Cancelling SCAN and continuing
listening to a track
➮ press the
button @ on the
remote control repeatedly until
the desired speed is shown.
To end the scanning process,
➮ press MENU•OK button 7.
For fast searching backwards
The currently scanned track will then
continue to be played normally.
➮ press the
button @ on the
remote control repeatedly until
the desired speed is shown.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮ press the RPT 4 button 9.
To end the searching,
➮ press the button A on the
remote control.
“REPEAT TRACK” appears briefly on
the display, and the RPT symbol is
shown. The track is repeated continu-
ously until you deactivate RPT.
Random track play (MIX)
➮ Press the 1 MIX button 9.
“MIX CD ON” appears briefly on the
display and the MIX symbol is dis-
played. The next randomly selected
track will then be played.
Cancelling REPEAT
If you want to cancel the repeat func-
tion,
➮ press the RPT 4 button 9 again.
Cancelling MIX
“REPEAT ALL” appears briefly on the
display, and the RPT symbol disap-
pears. Normal playback is then re-
sumed.
➮ Press the 1 MIX button 9 again.
“MIX CD OFF” appears briefly on the
display and the MIX symbol disap-
pears.
REPEAT with the remote control
Scanning tracks (SCAN)
In CD mode, you can select the RE-
You can scan (briefly play) all the tracks PEAT mode with the remote control.
on the CD.
To repeat a track,
➮ Press and hold down the
➮ press the PLAY MODE button J
MENU•OK button 7 for longer
than two seconds.
repeatedly until “TRACK” is shown
on the external display next to the
The next track will then be scanned.
repeat symbol.
To cancel REPEAT,
Note:
You can set the scanning time. For ➮ press the PLAY MODE button J
further information, please read
the section entitled “Setting the
scanning time” in the “Radio
mode” chapter.
repeatedly until “ALL” is shown on
the external display next to the re-
peat symbol.
105
CD MODE
Repeated playback of a defined Changing the display
section of a title
You can select different displays for CD
mode:
You can use the remote control to de-
fine a section of a title and repeat it
endlessly in a loop.
●
“NORMAL MODE”:
First line: Track number
Second line: Playing time
Note:
This function is operable only if an
external display is connected.
●
“INFO MODE”:
First line: Track number and play-
ing time.
To define the starting point of the sec-
tion,
Second line: CD text (if available)
●
“CLOCK MODE”:
First line: Track number and play-
ing time.
Second line: CD text (if available)
and time
➮ listen to a title and press the A-B
button L on the remote control at
the point where you want the re-
peat function to start.
To define the ending point of the sec-
tion,
●
“MINIMAL MODE”:
The title number is displayed on
the top line.
➮ listen to a title and press the A-B
button L on the remote control at
the point where you want the
repeat function to end.
Note:
CD text can only be displayed if
the appropriate information is con-
tained on the CD.
The section of the title is repeated until
you press the A-B button L again.
To switch between the display options,
Interrupting playback (PAUSE)
➮ Press the button 6 9.
➮ press the DIS•ESC button 5
once or several times until the de-
sired display is shown.
“PAUSE” appears on the display.
Cancelling pause
Display on an external display
➮ During the pause, press the but-
ton 6 9.
In CD mode, the following information
is always shown on an external display,
independent of the selected display of
the device display:
Playback is continued.
You can also interrupt and continue
playback using the button A on the
remote control.
●
●
●
the number of the current track,
the number of tracks on the CD,
the track information from the CD
text (if available)
and
106
CD MODE
●
the playing time of the track
(Single Elapsed)
Scrolling CD text again
You can re-scroll the displayed CD text
at any time in Info Mode.
or
●
the remaining playing time of the
track (Single Remain)
➮ Briefly press the 5 SCL button 9.
Programming your favourite
track with the remote control
or
●
the elapsed playing time of the CD
(Total Elapsed)
In CD mode, you can use the remote
control to program a playlist of up to
20 of your favourite tracks of the cur-
rent CD. The playlist is deleted when
you remove the CD or when you stop
the playlist and exit the programming
mode.
or
●
the remaining playing time of the
CD (Total Remain)
To select one of the different time dis-
play options,
Note:
➮ press the DISPLAY button C on
the remote control repeatedly until
the desired information is shown
on the external display.
This function is operable only if an
external display is connected.
Defining and starting a playlist
Displaying CD text
➮ Press the PROGRAM button K
on the remote control.
Some CDs include CD text. The CD
text might contain the names of the
artist, album and tracks.
The programming mode is displayed.
The number of available tracks on the
CD is displayed and the selection mark
(green) is positioned at memory loca-
tion 1.
If the CD text is available on the CD, it
is shown on the second line of the dis-
play in Info Mode and Clock Mode. The
CD text is shown as scrolling text on
the display with every track change.
After the CD text is displayed once, the
first 13 characters of the CD text of the
current track are displayed.
➮ Enter the first track of your playlist
with the numeric buttons 0 to 9 S.
The selection mark moves to the next
memory location.
➮ Enter the next track of your playlist
with the numeric buttons 0 to 9 S.
Note:
The CD text is displayed as scroll-
ing text if it contains more than
13 characters in Info mode or
more than 8 characters in Clock
mode.
If your playlist should have fewer than
20 tracks,
➮ move the selection mark with the
arrow buttons 6 to “START” and
press the ENTER button >.
107
CD MODE
Note:
Ejecting a CD
➮ Press the
The control panel opens out towards
you.
After you have programmed a
playlist and exited the menu with
“EXIT”, the playlist is not saved.
button 2.
Stopping the playlist
➮ Press the eject button next to the
CD compartment.
To end a running playlist,
The CD is ejected.
➮ Press the PROGRAM button K
on the remote control.
➮ Remove the CD and close the con-
trol panel.
The programming mode is displayed.
The selection mark is positioned on
“STOP”. To end the playback of the
playlist,
Notes:
●
If a CD is ejected, the drive will
automatically draw it back in again
after approx. 10 seconds.
➮ press the ENTER button >.
●
CDs can also be ejected if
another audio source is active.
Notes:
●
If you selected “STOP” and con-
firmed it with the ENTER button
>, the playlist is deleted.
●
If you want to exit the display of
the playlist without deleting the
playlist, mark “EXIT” and confirm it
with the ENTER button >.
Traffic announcements in CD
mode
If you wish to receive traffic announce-
ments in CD mode,
➮ press the TRAF button 8.
The priority for traffic announcements
is activated if the display shows the traf-
fic jam symbol. For further details,
please read the chapter entitled “Traf-
fic information”.
108
MP3/WMA MODE
Up to 599 MP3 files in one directory
can be managed with this device. The
maximum number of files per CD/DVD
is 150,000, the maximum directory
depth is five.
MP3/WMA mode
You can also use this car sound sys-
tem to play DVDs, CD-Rs and CD-
RWs that contain MP3 music files. You
can also play WMA files. The opera-
tion for playing MP3 and WMA files is
identical.
D
i
r
D01
Notes:
e
c
t
●
WMA files with Digital Rights Man-
agement (DRM) from online music
shops cannot be played with this
device.
D02
D03
o
r
i
e
s
D04
T001
●
WMA files can only be played
back safely if they were created
with Windows Media-Player ver-
sion 8.
T001
T002
T003
T004
T005
T002
T003
T004
T005
T006
T007
T008
T009
T010
T011
T
r
a
c
k
s
•
Preparing an MP3/WMA CD
T001
F
i
The various combinations of DVD/CD
burners, DVD/CD burning software and
DVD/CD blanks may lead to problems
arising with the device’s ability to play
certain CDs. If problems occur with
your own burned DVDs/CDs, you
should try another brand of DVD/CD
blanks or choose another colour of CD
blanks. To avoid problems when play-
ing CDs, you should not burn DVDs/
CDs at speeds greater than 16x.
T002
T003
T004
T005
T006
l
e
s
You can name each directory using a
PC. The device is capable of display-
ing the directory name. Name the di-
rectories and tracks/files using your CD
burner software.The software’s instruc-
tion manual will provide details on how
to do this.
The format of the DVD/CD must be ISO
9660 Level 1/Level 2 or Joliet. Other
formats cannot be played reliably.
You can create a maximum of 254 di-
rectories on a DVD/CD. You can use
this device to access each of these di-
rectories.
109
MP3/WMA MODE
Note:
●
●
Do not use “mixed” CDs contain-
ing both non-MP3 data and MP3
tracks (the device only reads MP3
files during MP3 playback).
When naming directories and
tracks/files you should avoid using
accents and special characters.
You can use a maximum of 32
characters (including the “.MP3”
or “.WMA” file extension) for track
names and directory names.
Do not use mix-mode CDs con-
taining both CD-audio tracks and
MP3 tracks. If you try playing a
mix-mode CD, the device will only
play the CD-audio tracks.
If you like your files to be in the correct
order, you should use burner software
that places files in alphanumerical or-
der. If your software does not provide
this feature you also have the option
of sorting the files manually. For this
purpose, you must enter a number in
front of each file name, e.g. “001”,
“002”, etc. The leading zeros must also
be entered.
Switching to MP3 mode
MP3 mode is activated in the same
way as normal CD mode. For further
information, please read the section
entitled “Switching to CD mode” in the
“CD mode” chapter.
If you connected an external display,
the following information is displayed
after the CD is read and the MP3/WMA
playback has started:
MP3 tracks can contain additional in-
formation such as the artist, album and
track names (ID3 tags). This device
can display ID3 tags (version 1).
●
Number of the track and number
of tracks in the directory.
When creating (coding) MP3 files from
audio files, you should use bit rates
from 80 to 320 kbit/s and sampling
rates of 32, 44 and 48 kHz.
●
●
Bit rate of the file.
Elapsed playing time and total
playing time of the track.
●
●
Name of the directory.
This device can only play MP3 files that
have the “.MP3” file extension.
In the left column, the list of tracks
in the directory.
Notes:
●
In the right column, MP3 informa-
tion from the ID tags (only if avail-
able on the DVD/CD).
To ensure uninterrupted playback,
●
do not try changing the file exten-
sion to “.MP3” of any files other
than MP3 files and then attempt to
play them! The device will ignore
these invalid files during playback.
110
MP3/WMA MODE
Setting the display (internal
display)
Selecting the directory on the
device
For convenient navigation in the data
structure of the CD, you can display
the current and the following directory
on the two lines of the display. The di-
rectories are displayed with the names
that you created when burning the CD.
Whilst the directories are being dis-
played, you can use the arrow buttons
to display and select all the available
directories.
Configuring the default display
You can display various types of infor-
mation on the current track:
1. “NORMAL MODE”:
First line: Type of file (MP3 or
WMA), number of track and play-
ing time.
Second line: Track name
2. “INFO MODE”:
First line: Track name.
Second line: MP3-ID-TAG (if avail-
able and activated, see “Selecting
MP3 info”)
➮ During the MP3 playback, press
the or button 6.
The browse mode is automatically
started, the current track is displayed
on the first line of the display and the
next track is displayed on the second
line.
Note:
The system can display MP3-ID
tags (version 1) if they have been
saved with the MP3 files (for fur-
ther information, please read the
instructions that came with your
PC’s MP3 software or burner soft-
ware).
➮ Press the or button 6
repeatedly until the first line of
the display shows a D.
➮ Press the button 6.
The names of the current and the fol-
lowing directory are shown on the dis-
play.
3. “MP3 BROWSE MODE”:
First line: Name of current track
Second line: Name of next track.
If you want to select a directory,
4. “CLOCK MODE”:
➮ press one of the
/
buttons 6
First line: Type of file (MP3 or
WMA), number of track and play-
ing time.
repeatedly until the directory is
shown in the top line of the display
and then press the button 6.
Second line: MP3 info and time.
The selected directory is opened. The
tracks contained in the directory are
displayed in browse mode.
To switch between the different display
options,
➮ press the DIS•ESC button 5.
111
MP3/WMA MODE
➮ Press the or button 6 re-
peatedly until the first line of the
display shows the desired track.
Selecting a directory/track with
the remote control
In MP3 mode, you can directly select
directories and tracks using the remote
➮ Press the button 6.
The playback starts, the browse mode control.
is automatically ended after approx. 10
seconds.
Note:
This function is operable only if an
external display is connected.
Selecting a track on the device
Track selection in the same
directory
Selecting tracks/files using the
arrow buttons (Normal, info and
clock mode)
➮ Enter the number of the desired
track directly using the numeric
buttons 0 to 9 S of the remote
control.
To move up or down to another track/
file in the current directory,
➮ press the or button 6 once
After entering the number, the desired
track begins to play.
or several times.
A single press of button 6 restarts
the current track, if it previously played
for more than 3 seconds.
Or
To move up or down to another track/
file in the current directory,
Selecting tracks in browse mode
➮ press the or button P once or
Browse mode conveniently allows you
to view the tracks contained in a direc-
tory and then select a particular track.
several times.
Selecting a directory
To select a directory with the remote
control,
➮ During MP3 playback, repeatedly
press the DIS•ESC button 5 until
“MP3 BROWSE MODE” is dis-
played.
➮ press the button 6 repeatedly
until the selection mark is posi-
tioned on the directory symbol.
➮ Press the or button 6 to
display all the tracks contained in
the directory one after another.
➮ Press the ENTER button >.
The directory list is shown on the
external display.
➮ If you want to select the track
shown on the upper display line,
press the button 6.
➮ Press the or button 6 to
mark the desired directory.
➮ Press the ENTER button.
The track list of the directory is dis-
played.
112
MP3/WMA MODE
➮ Press the or button 6 to
Fast searching with the remote
control
mark a track in the directory.
➮ Press the ENTER button.
You can perform a fast searching with
different speeds (2x, 4x, 8x, 16x, and
32x) with the remote control.
The desired track is started.
Selecting a track from the track list
Note:
You can display a list of all tracks of a
DVD/CD on the external display and
select a track from the list.
The search speed is shown on an
external display.
For fast searching forwards
➮ Press the PROGRAM button K.
➮ press the
button @ on the
The track list is displayed.
remote control repeatedly until
the desired speed is shown.
➮ Enter the number of the desired
track directly using the numeric
buttons 0 to 9 S of the remote
control.
For fast searching backwards
➮ press the
button @ on the
remote control repeatedly until
the desired speed is shown.
After entering the number, the desired
track begins to play.
To end the searching,
Or
➮ press the button A on the
To move up or down to another track/
file in the current directory,
remote control.
Random track play – MIX
To play the tracks in the current direc-
tory in random order,
➮ press the or button 6 once
or several times to move the se-
lection mark to the desired track.
➮ briefly press the 1 MIX button 9.
➮ Press the ENTER button.
“MIX ON” and the MIX symbol appear
on the display.
The desired track is started.
Fast search
To fast search backwards or forwards,
Cancelling MIX
To cancel MIX,
➮ press and hold down the or
button 6 until fast searching
backwards/forwards begins.
➮ press the 1 MIX button 9 repeat-
edly until “MIX OFF” is displayed.
The MIX symbol disappears.
The Repeat function is automatically
activated, and the display shows the
RPT symbol.
113
MP3/WMA MODE
Cancelling REPEAT
Scanning tracks – SCAN
To stop the current track or current
directory from being repeated,
You can scan (briefly play) all the tracks
on the CD.
➮ press the 4 RPT button 9 repeat-
edly until “REPEAT OFF” is dis-
played.
➮ Press and hold down the MENU•OK
button 7 for longer than two
seconds.
RPT disappears from the display.
The next track will then be scanned.
“SCAN” briefly appears on the display.
REPEAT with the remote control
Notes:
In CD mode, you can select the RE-
PEAT mode with the remote control.
●
You can set the scanning time.
For further information, please
read the section entitled “Setting
the scanning time” in the “Radio
mode” chapter.
Note:
This function is operable only if an
external display is connected.
To repeat a track,
●
The Scan function cannot be acti-
vated if it is started at the last title
of a directory.
➮ press the PLAY MODE button J
repeatedly until “REPEAT ONE” is
shown on the lowest line of the
external display.
Cancelling SCAN and continuing
listening to a track
To repeatedly play all the tracks of a
directory,
➮ Press and hold down the MENU•OK
button 7 for longer than two
seconds.
➮ press the PLAY MODE button J
repeatedly until “REPEAT FOLD-
ER” is shown on the lowest line of
the external display.
The currently scanned track will then
continue to be played normally.
To cancel REPEAT,
Repeated playback of individual
tracks or entire directories –
REPEAT
➮ press the PLAY MODE button J
repeatedly until “FOLDER” is
shown on the lowest line of the
external display.
To play the current track repeatedly,
➮ briefly press the 4 RPT button 9.
Repeated playback of a defined
section of a title
“REPEAT TRACK” and RPT appear
briefly on the display.
You can use the remote control to de-
fine a section of a title and repeat it
endlessly in a loop.
To repeat the whole directory,
➮ press the 4 RPT button 9 again.
“REPEAT DIR” appears briefly on the
display.
114
MP3/WMA MODE
Note:
This function is operable only if an
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “VARIOUS MENU”
appears on the display.
external display is connected.
To define the starting point of the sec-
tion,
➮ Press the MENU•OK button 7.
➮ listen to a title and press the A-B
button L on the remote control at
the point where you want the
repeat function to start.
➮ Press the or button 6
repeatedly until “MP3 INFO”
appears on the display.
➮ Use the
buttons 6 to switch
To define the ending point of the sec-
tion,
between the “ON” and “OFF”
options.
➮ continue listening to the title and
press the A-B button L on the
remote control at the point where
you want the repeat function to
end.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
The section of the title is repeated until
Displaying scrolling texts
(scroll)
The selected information title, track
names or file name and directory name
are shown once as scrolling text when
the title changes.
you press the A-B button L again.
Interrupting playback (PAUSE)
➮ Press the button 6 9.
“PAUSE” appears on the display.
Cancelling pause
To display the information again as
scrolling text,
➮ During the pause, press the
button 6 9.
➮ briefly press the 5 SCL button 9.
Playback is continued.
You can also interrupt and continue
playback using the button A on the
remote control.
Note:
The information is displayed as
scrolling text if it contains more
than 13 characters in Normal/Info
mode, more than 11 characters in
Browse mode or more than 8
characters in Clock mode.
Selecting MP3 info
If you want to select the “MP3 INFO”
display mode, you first have to activate
this function in the menu. In order for
the system to be able to display MP3
information, the information must be
stored on the CD in the form of ID tags
together with the MP3 files.
115
CD CHANGER MODE
CD-changer mode
Fast searching (audible)
To fast search backwards or forwards,
Note:
➮ hold one of the
buttons 6
Information on handling CDs, in-
serting CDs and operating the CD
changer can be found in the oper-
ating instructions supplied with
your CD changer.
pressed on the device or the or
button 6 of the remote control
until the fast searching backwards
or forwards starts.
Changing the display
Switching to CD-changer mode
You can choose from various display
options in CD mode:
➮ Press SRC ; on the device or
the SOURCE button ; on the re-
mote control repeatedly until
●
●
●
“NORMAL MODE”:
“CDC” appears on the display.
First line: Track number
Second line: CD number/CD
name and playing time
The device starts playing the first CD
that the CD changer detects.
“CLOCK MODE”:
Selecting CDs
To move up or down to another CD,
First line: Track number.
Second line: CD number/CD
name and clock time
➮ press the or button 6 on the
device or the or button 6 of
the remote control once or several
times.
“MINIMAL MODE”:
First line: Track number.
To switch between the display options,
Note:
➮ press the DIS•ESC button 5.
The device will ignore empty CD
slots in the changer and slots con-
taining invalid CDs.
In the menu you can choose to display
the CD name (if available) instead of
the CD number. (For further informa-
tion, please read the “Naming CDs”
section):
Selecting tracks
To move up or down to another track
on the current CD,
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VARIOUS MENU”
appears on the display.
➮ press the or button 6 on the
device or the or button 6 of
the remote control once or several
times.
➮ Press the MENU•OK button 7.
116
CD CHANGER MODE
➮ Press the or button 6
repeatedly until “CD NAME” or
“DISC NUMBER” appears on
the display.
Random track play (MIX)
To play the tracks on the current CD in
random order,
➮ briefly press the 1 MIX button 9.
➮ Use the
buttons 6 to switch
“MIX CD” appears briefly and MIX
lights up on the display.
between the “CD NAME” and
“DISC NUMBER” options.
To play the tracks on all inserted CDs
in random order,
When you have finished making your
changes,
➮ briefly press the 1 MIX button 9.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
“MIX ALL” appears briefly and MIX
lights up on the display.
Cancelling MIX
Repeating individual tracks or
whole CDs (REPEAT)
To repeat the current track,
➮ Press the 1 MIX button 9 repeat-
edly until “MIX OFF” is displayed.
➮ briefly press the RPT 4 button 9.
Scanning all tracks on all CDs
(SCAN)
To scan (briefly play) all the tracks on
all the inserted CDs in ascending or-
der,
“REPEATTRACK” appears briefly and
RPT lights up on the display.
To repeat the current CD,
➮ press the RPT 4 button 9 again.
➮ press and hold down the
MENU•OK button 7 for longer
than two seconds.
“REPEAT CD” appears briefly and RPT
lights up on the display.
Cancelling REPEAT
“SCAN” and the selected display mode
appear alternately on the display.
To stop the current track or current CD
from being repeated,
Note:
➮ repeatedly press button RPT 4
9 until “REPEAT OFF” appears
in the display and RPT disappears.
You can set the scanning time. For
further information, please read
the section entitled “Setting the
scanning time” in the “Radio
mode” chapter.
117
CD CHANGER MODE
➮ Use the
/
buttons 6 to select
Stopping SCAN
the character that you want. If you
want an empty space, simply se-
lect the underscore.
To stop scanning,
➮ press and hold down the
MENU•OK button 7 for longer
than two seconds.
➮ Use the or button 6 to move
from one text input position to an-
other.
The currently scanned track will then
continue to be played normally.
When you have finished making your
changes,
Naming CDs
The car sound system allows you to ➮ press the MENU•OK button 7
assign names for up to 30 CDs so that
you can recognise them more easily.
The names can be a maximum of sev-
en characters long.
“CD NAME FULL” will appear on the
display if you try assigning more than
30 names.
and then the DIS•ESC button 5
to exit the menu.
Deleting a CD name
➮ Listen to the CD whose name you
want to delete.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until "VARIOUS MENU"
appears on the display.
Entering/editing CD names
➮ Listen to the CD that you want.
➮ Press the MENU•OK button 7.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “VARIOUS MENU”
appears on the display.
➮ Press the or button 6
repeatedly until “CD NAME EDIT”
appears on the display.
➮ Press the MENU•OK button 7.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until “CD NAME EDIT”
appears on the display.
The name of the current CD is dis-
played.
➮ Press and hold down the
MENU•OK button 7. After ap-
prox. four seconds you will hear a
beep and “DELETE NAME” ap-
pears on the display.
➮ Press the MENU•OK button 7.
You will now enter editing mode.
If your CD does not have a name yet,
“ABCDEFG” appears on the display.
The currently active text input position
flashes.
➮ Release the MENU•OK button 7.
The CD name will be deleted.
➮ You can return to the menu by
pressing the MENU•OK button
7.
118
CD CHANGER MODE
CLOCK TIME
Deleting all CD names
CLOCK time
You can delete all the CD names stored
in the car sound system.
Displaying the time
You can make the clock time appear
continuously in the bottom part of the
display while any audio source is acti-
vated. For further information, please
read the “Configuring the display” sec-
tions in the relevant chapters.
➮ Listen to a CD.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “VARIOUS MENU”
appears on the display.
➮ Press the MENU•OK button 7.
Setting the clock automatically
➮ Press the or button 6 re-
peatedly until “CD NAME EDIT”
appears on the display.
You can configure the system to set
the clock time automatically using the
RDS signal.
➮ Press the MENU•OK button 7.
➮ Press the MENU•OK button 7.
The name of the current CD is
displayed.
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
➮ Press and hold down the
MENU•OK button 7. After ap-
prox. four seconds you will hear a
beep and “DELETE NAME” ap-
pears on the display. Continue
holding the button pressed down
until you hear a second beep and
“DELETE ALL” appears on the dis-
play.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CLOCK AUTO”
or “CLOCK MANUAL” appears
on the display.
➮ Select the “CLOCK AUTO” setting
using the or button 6.
➮ Release the MENU•OK button 7.
➮ Press the MENU•OK button 7.
The CD names will be deleted.
The menu appears again.
➮ To exit the menu, press the
MENU•OK button 7 and twice
DIS•ESC 5.
Setting the clock manually
To set the clock time manually,
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
➮ Press the MENU•OK button 7.
119
CLOCK TIME
➮ Press the or button 6
repeatedly until “CLOCK SET”
appears on the display.
Displaying the time
continuously when the device is
off and the ignition is on
To display the time when the device is
off and the vehicle ignition is on,
➮ Press the MENU•OK button 7.
The time appears on the display. The
hours flash and can be adjusted.
➮ Press the MENU•OK button 7.
➮ Set the hours using the
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
/
buttons 6.
Once the hours are set,
➮ press the button 6.
The minutes flash.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “OFF CLOCK
OFF” or “OFF CLOCK ON”
appears on the display.
➮ Set the minutes using the
/
buttons 6.
➮ Press the MENU•OK button 7
and then the DIS•ESC button 5.
➮ Press the or button 6 to
switch between the ON/OFF
settings.
Selecting 12/24-hour clock
mode
➮ Press the MENU•OK button 7.
When you have finished making your
changes,
➮ Press the or button 6
repeatedly until “CLOCK MENU”
appears on the display.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “24 HOUR MODE”
or “12 HOUR MODE” appears on
the display.
➮ Press the or button 6 to
switch between the modes.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
120
SOUND
Setting the left/right volume
distribution (balance)
To adjust the left/right volume distribu-
tion (balance),
Sound
You can adjust the sound settings (bass
and treble) separately for each source
(radio, DVD/CD, CD changer, AUX).
The volume distribution settings (bal-
ance and fader) apply to all the audio
sources.
➮ press the AUD•DEQ : button.
➮ Press the or button 6
repeatedly until “BALANCE”
appears on the display.
Note:
Instead of the AUD•DEQ button
: on the device, you can also
use the 3D button : on the
remote control.
➮ Press the or button 6 to
adjust the balance (right/left).
➮ Press the AUD•DEQ : button, to
close the menu or press the or
button 6 to make further
Adjusting the bass
➮ Press the AUD•DEQ : button.
changes to the settings.
➮ Press the or button 6 to
Adjusting the front/rear volume
distribution (fader)
To adjust the front/rear volume distri-
bution (fader),
adjust the bass.
➮ Press the AUD•DEQ : button, to
close the menu or press the or
button 6 to make further
changes to the settings.
➮ press the AUD•DEQ : button.
➮ Press the or button 6
repeatedly until “FADER” appears
on the display.
Adjusting the treble
➮ Press the AUD•DEQ : button.
➮ Press the or button 6
repeatedly until “TREBLE”
appears on the display.
➮ Press the or button 6 to
adjust the fader (front/rear).
➮ Press the AUD•DEQ : button, to
close the menu or press the or
button 6 to make further
➮ Press the or button 6 to
adjust the treble.
➮ Press the AUD•DEQ : button, to
close the menu or press the or
button 6 to make further
changes to the settings.
changes to the settings.
121
X-BASS
X-BASS
EQUALIZER
Equalizer
The X-BASS feature can be used to The device features a digital equalizer
boost the bass at low volume levels.
DEQ.
This means you have three 5-band
equalizers, six sound presets and sev-
en vehicle presets at your disposal.
Adjusting the X-BASS boost
The X-BASS boost (Level) can be set
in steps ranging from 0 to 6 for one of
the following frequencies: 32 Hz, 40 Hz,
50 Hz, 63 Hz or 80 Hz.
You can configure the EQ1 - EQ3
equalizers manually. When doing so
you can adjust (boost or reduce) one
frequency of an equalizer band as well
as the quality factor, i.e. the width of
the filter.
“LVL 0” means that no X-BASS boost
will be applied, and “LVL6” means that
X-BASS will be boosted by the maxi-
mum amount.
The following bands are available:
➮ Press the AUD•DEQ button : on
the device or 3D : on the remote
control.
●
●
●
●
●
LOW 1
LOW 2
HIGH 1
HIGH 2
HIGH 3
20 - 250 Hz
20 - 250 Hz
315 - 20,000 Hz
315 - 20,000 Hz
315 - 20,000 Hz
“BASS” appears on the display.
➮ Press the or button 6 repeat-
edly until “X-BASS” appears on the
display.
Switching the equalizer on/off
To switch the equalizer on/off,
➮ Press the MENU•OK button 7 or
ENTER > on the remote control.
➮ hold the AUD•DEQ button : or
the 3D button : on the remote
control pressed for more than two
seconds.
The X-Bass menu is displayed. The
frequency flashes.
➮ Press the or button 6 to set
the frequency that you want.
The equalizer menu appears on the
display.
➮ Press the button 6.
The boost level (LVL) flashes.
To activate the equalizer,
➮ Press the or button 6 to set
➮ select one of the sound presets or
adjust the equalizer manually. For
further details on this, please read
the sections that follow in this
chapter.
the boost level that you want.
➮ Press the AUD•DEQ : button.
122
EQUALIZER
To deactivate the equalizer,
Selecting vehicle presets
➮ press the or button 6 repeat-
edly until “EQ OFF” appears on the
display.
You can select optimised equalizer
settings for the following vehicle types:
● COMPACT
● 4DOOR
● CONVERT
● VAN
● ROADSTER
● MINI
➮ Press the MENU•OK button 7
and then the DIS•ESC 5.
Selecting sound presets
You can select sound presets for the
following music types.
● TRUCK
●
●
●
●
●
●
POP
The settings for these vehicle types
have already been programmed.
ROCK
TECHNO
JAZZ
➮ Hold the AUD•DEQ button : or
the 3D button : on the remote
control pressed for more than two
seconds.
CLASSIC
SPEECH
➮ Press the or button 6 repeat-
edly until “CAR PRESETS” appears
on the display.
The settings for these music styles
have already been programmed.
➮ Hold the AUD•DEQ button : or
the 3D button : on the remote
control pressed for more than two
seconds.
➮ Press the MENU•OK button 7 or
ENTER > on the remote control.
➮ Press the or button 6 re-
peatedly until the vehicle type that
you want is displayed.
➮ Press the or button 6 repeat-
edly until “SOUND PRESETS”
appears on the display.
➮ Press the MENU•OK button 7 and
then the DIS•ESC 5.
➮ Press the MENU•OK button 7 or
ENTER > on the remote control.
The settings are saved.
➮ Press the or button 6
repeatedly until the sound preset
that you want is displayed.
➮ Press the MENU•OK button 7
and then the DIS•ESC 5.
The settings are saved.
123
EQUALIZER
➮ Press the
or button 6 repeat-
Manually adjusting the
equalizer
edly until the equalizer band that you
want to configure (“LOW1”, “LOW2”,
“HIGH1”, “HIGH2” or “HIGH3”)
appears on the display.
Notes on adjusting the settings
We recommend you use a CD that you
are familiar with for making changes
to the settings.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 repeat-
edly until the frequency that you
want is displayed.
Before adjusting the equalizer, set the
sound and volume distribution settings
to zero and deactivate X-BASS. For
further information, please read the
“Sound” chapter.
➮ Press the MENU•OK button 7.
The top line displays the GAIN and the
quality factor “Q”. The gain setting
flashes. You can use the quality factor
to adjust the width of the filter. The high-
er you set the value for the quality fac-
tor the more directly the filter will be
applied to the selected frequency.
➮ Listen to the CD.
➮ What kind of impression does the
sound make?
➮ Now read the “Sound impression”
column in the table entitled “Help
adjusting the equalizer”.
To adjust the gain,
➮ Set the equalizer values as de-
➮ press the or button 6.
To adjust the quality factor,
➮ press the button 6.
The quality factor setting flashes.
scribed in the “Measures” column.
Making adjustments
➮ Hold the AUD•DEQ button : or
the 3D button : on the remote
control pressed for more than two
seconds.
➮ Press the or button 6
repeatedly until the setting that
you want is displayed.
➮ Press the or button 6
repeatedly until “MANUAL EQ”
appears on the display.
Note:
Please note that you can boost or
reduce one frequency in each
equalizer band. Proceed in the
way described above with all the
equalizer bands that you want to
adjust.
➮ Press the MENU•OK button 7 or
ENTER > on the remote control.
➮ Press the
or button 6 re-
peatedly until the equalizer that
you want to configure (“USER
EQ1”, “USER EQ2” or “USER
EQ3”) appears on the display.
➮ Press the MENU•OK button 7
and then repeatedly the DIS•ESC
button 5 or the AUD•DEQ button
; for longer than two seconds.
➮ Press the MENU•OK button 7.
The settings are saved.
124
EQUALIZER
Help adjusting the equalizer
Measures
Sound Impression/problem
Increase bass with
Bass sound is too weak
Frequency: 32 to 160 Hz
Gain: +4 to +6
Reduce the lower mid level with
Frequency: 400 Hz
Gain: approx. -4
Dirty bass
Booming sound
Unpleasant pressure
Reduce the mid level with
Frequency: 1,000 to 2,500 Hz
Gain: -4 to -6
Sound very much in the foreground,
aggressive, no stereo effect.
Boost the treble range with
Frequency: 6,300 to 10,000 Hz
Gain: +2 to +4
Dull sound
Little clarity
No brilliance to the instruments
125
DISPLAY
When you have finished making your
changes,
Adjusting the display
settings
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu or the DIMMER
button G on the remote control.
Adjusting the display
brightness
If your car sound system is connected
as described in the installation instruc-
tions, the display brightness of the in-
ternal display switches with the head-
lights. You can adjust the display bright-
ness separately for night and day in
steps ranging from 1 - 16.
Adjusting the viewing angle
You can adjust the display’s viewing
angle to suit the installation position of
the device in your vehicle.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “DISPLAY MENU”
appears on the display.
Note:
The brightness of a connected
display can be set in the DVD
setup. For further details, read the
section “DVD setup” in the “DVD
mode” chapter.
➮ Press the MENU•OK button 7 or
the DIMMER button G on the
remote control
➮ Press the or button 6
repeatedly until “ANGLE” appears
on the display with the current
setting.
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “DISPLAY MENU”
appears on the display.
➮ Press the or button 6 to
➮ Press the MENU•OK button 7.
adjust the viewing angle.
OR
When you have finished making your
changes,
➮ Press the DIMMER button on the
remote control.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
or the DIMMER button G on the
remote control to exit the menu.
➮ Press the or button 6
repeatedly until “DAY” or “NIGHT”
appears on the display with the
current setting.
➮ Press the or button 6 to
switch between the brightness
levels.
126
EXTERNAL AUDIO SOURCES
When you have finished making your
changes,
External audio sources
In addition to the CD changer, you can
also connect another external audio
source equipped with a line output. If
no CD changer is connected to the
device, you can connect two external
audio sources. Audio sources can, for
example, be portable CD players, Mi-
niDisc players or MP3 players.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
Note:
If the AUX input is switched on,
you can select it by pressing the
SRC button ;.
TheAUX input must be activated in the
menu.
An adapter cable is needed to connect
an external audio source instead of a
CD changer. You can obtain this cable
(Blaupunkt no.: 7 607 897 093) from
your authorised Blaupunkt dealer.
Information about where to connect an
audio source to theAUX2 input can be
found in the installation instructions.
Switching the AUX input on/off
➮ Press the MENU•OK button 7.
➮ Press the or button 6
repeatedly until “AUX MENU”
appears on the display.
➮ Press the MENU•OK button 7.
➮ Repeatedly press the or
button 6 until “AUX2” or “AUX1”
appears on the display.
If a CD changer is connected, „AUX1“
is not available.
➮ Use the
buttons 6 to switch
between the “ON” and “OFF”
options.
127
AMPLIFIER/SUB-OUT
Amplifier/sub-out
Switching the dual zone on/off
If you connected the RC 13 H remote
control (available as optional equip-
ment) via an adapter, the rear loud-
speakers are switched off. You can lis-
ten to the audio playback from the
DVD/CD mode via the headphone out-
puts of the RC 13 H while the driver
listens to a different source via the front
loudspeakers.
The car sound system provides con-
nections that allow you to connect ex-
ternal amplifiers. You can also connect
an amplifier to the device's integrated
low-pass filter to drive a subwoofer. The
amplifiers must be connected as de-
scribed in the installation instructions.
Switching the internal amplifier
on/off
➮ Press the MENU•OK button 7.
If you are using external amplifiers, you
can switch off the device’s internal
amplifier (“INT AMP OFF” setting).
➮ Press the or button 6
repeatedly until “VARIOUS
MENU” appears on the display.
Note:
➮ Press the MENU•OK 7, to
Please check this setting if the
loudspeakers do not emit any
sound.
display the menu.
➮ Press the or button 6
repeatedly until “DUAL ZONE ON”
or “DUAL ZONE OFF” appears on
the display.
➮ Press the MENU•OK button 7.
➮ Press the or button 6 re-
peatedly until "VARIOUS MENU"
appears on the display.
➮ Use the
buttons 6 to choose
between “DUAL ZONE ON” and
“DUAL ZONE OFF”.
➮ Press the MENU•OK 7, to
display the menu.
When you have finished making your
changes,
➮ Press the or button 6
repeatedly until “INT AMP ON” or
“INT AMP OFF” appears on the
display.
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
➮ Use the
buttons 6 to choose
between “INT AMP ON” and “INT
AMP OFF”.
When you have finished making your
changes,
➮ press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
128
TMC
SPECIFICATIONS
TMC for dynamic
Specifications
navigation systems
TMC stands for “Traffic Message
Channel”.
Amplifier
Output power: 4 x 26 watt sine
according to
Traffic reports are broadcast digitally
via TMC, which means they can be
used by compatible navigation systems
during dynamic route planning. Your car
sound system has a TMC output, which
you can use for connecting Blaupunkt
navigation systems.
DIN 45 324 at 14.4 V
4 x 50 watt max. power
Tuner
Wavebands in Europe:
FM
MW
LW
:
:
:
87.5 - 108 MHz
531 - 1 602 kHz
153 - 279 kHz
You can find out from your Blaupunkt
dealer which navigation systems can
be used with your car sound system.
FM frequency response:
35 - 16,000 Hz
DVD
Supported formats:
If a navigation system is connected and
a TMC sender is being received, the
display shows TMC.
DVD±R,
If dynamic navigation is active, the sys-
tem will tune into a TMC station auto-
matically.
DVD±RW,
SVCD, VCD,
JPEG.
Region code 2
Dolby Digital Coaxial™ output
Video output
PAL/NTSC support
CD
Frequency response:
20 - 20,000 Hz
Pre-amp out
4 channels: 2 V
Input sensitivity
AUX input:
2 V / 6 kΩ
Tel./Navi input: 10 V / 1 kΩ
Subject to changes!
129
Bitte den ausgefüllten Gerätepass sicher aufbewahren!
Please keep the filled-in radio pass in a safe place!
Prière de conserver soigneusement la carte d’autoradio
remplie !
Tenete per favore il libretto di apparecchio, debitamente
riempito, in un posto sicuro!
Bewaar de ingevulde apparaatpas op een veilige plaats!
329
Country:
Phone:
Fax:
WWW:
Germany
Austria
Belgium
Denmark
Finland
France
(D)
(A)
(B)
0180-5000225
01-610 39 0
02-525 5444
05121-49 4002
01-610 39 391
02-525 5263
44-898 644
09-435 99236
01-4010 7320
01-89583 8394
210 94 12 711
01-46 66 706
02-369 62464
40 2085
(DK) 44-898 360
(FIN) 09-435 991
(F)
01-4010 7007
Great Britain (GB) 01-89583 8880
Greece
Ireland
Italy
(GR) 210 94 27 337
(IRL) 01-46 66 700
(I)
02-369 62331
40 4078
Luxembourg (L)
Netherlands (NL) 0800 400 1010
0800 400 1040
66-817 157
2185 00165
Norway
Portugal
Spain
(N)
(P)
(E)
(S)
66-817 000
2185 00144
902 52 77 70
08-7501850
91 410 4078
08-7501810
01-8471650
02-6130 0514
76 511 809
022-8771260
0212-346 00 40
708-6817188
Sweden
Switzerland (CH) 01-8471644
Czech. Rep. (CZ) 02-6130 0446
Hungary
Poland
Turkey
USA
Brasil
(H)
76 511 803
(PL) 0800-118922
(TR) 0212-335 06 71
(USA) 800-2662528
(Mercosur)
Malaysia
(Asia Pacific) (MAL) +604-6382 474
(BR) 0800 7045446
+55-19 3745 2773
+604-6413 640
Gerätepass
Las Vegas DVD35
....................................................
Name:
Typ:
7 645 650 310
....................................................
Serien-Nr: BP ...............................................
Blaupunkt GmbH, Robert-Bosch-Straße 200, D-31139 Hildesheim
07/05 - CM/ASA
(dt, gb, fr, it, nl)
8622404323
(DE) Hinweis zum PTY-EON-Empfang
Wenn Ihr Blaupunkt-Gerät von einem gehörten Radioprogramm zu einem anderen
Radioprogramm oder von einer gewählten Quelle (CD oder CD-Wechsler) zu
einem Radioprogramm umschaltet, so überprüfen Sie bitte, ob Sie PTY
(Programm-Typ) eingeschaltet haben.
Möchten Sie diese PTY-EON-Umschaltung nicht haben, so schalten Sie diese im
Menü mit „PTY off” aus. Drücken Sie zuvor eine der Tasten AUDIO, SRC oder
BND.
Bitte lesen Sie dazu auch in der Bedienungsanleitung unter „Radiobetrieb” den
Absatz „Programm-Typ (PTY)”.
(GB) Note regarding PTY-EON reception
If your Blaupunkt system switches from your chosen radio programme to another
radio programme or from your chosen audio source (CD or CD changer) to a radio
programme, please check whether you have activated the PTY (programme type)
function.
If you do not want this PTY-EON switching to occur, you should deactivate it in the
menu by selecting “PTY off”. Press one of the AUDIO, SRC or BND buttons
beforehand.
Please also read about this in the operating instructions in the section entitled
“Programme type (PTY)” under “Radio mode”.
(FR) Remarque concernant la réception PTY EON
Quand votre appareil Blaupunkt commute d’une émission de radio que vous êtes
en train d’écouter à un autre programme radio ou d’une source (CD ou changeur
CD) que vous avez choisie, assurez-vous d’avoir activé PTY (type de programme).
Si vous ne souhaitez pas cette commutation PTY EON, désactivez-la en
sélectionnant « PTY off » dans le menu. Appuyez au préalable sur l’une des
touches AUDIO, SRC ou BND.
Pour plus d’informations, reportez-vous également au paragraphe « Type de
programme (PTY) » du chapitre « Mode radio » du mode d’emploi.
(IT) Nota sulla ricezione del PTY-EON
Quando il vostro apparecchio Blaupunkt si sintonizza da un radioprogramma in
ascolto ad un altro, oppure si disinserisce dalla fonte audio selezionata (CD o
multilettore CD) e passa alla ricezione di un programma radio, controllate per
favore se avete inserito la funzione PTY (tipo di programma).
8 622 404 794
Se volete evitare queste commutazioni PTY-EON, selezionate nel menu la funzione
"PTY off". Prima di fare ciò premete uno dei tasti AUDIO, SRC o BND.
Leggete per favore a tale proposito quanto riportato nelle istruzioni d’uso nella
sezione "Esercizio Radio" al punto "Tipo di programma (PTY)".
(NL) Aanwijzing bij de PTY-EON-ontvangst
Wanneer uw Blaupunkt-apparaat van één beluisterde radiozender overschakelt op
een andere, of van een gekozen geluidsbron (cd of cd-wisselaar) op een
radiozender, kunt u controleren of u PTY (programmatype) hebt ingeschakeld.
Wanneer u geen prijs stelt op deze PTY-EON-omschakeling, schakelt u deze in het
menu uit met "PTY off". Druk van tevoren op een van de toetsen AUDIO, SRC of
BND.
Lees hiervoor ook in de gebruiksaanwijzing onder "Radioweergave" de alinea
"Programmatype (PTY)".
(SW) Information om mottagning med PTY-EON
Byter din Blaupunkt bilstereo självmant från inställt radioprogram eller spelad cd/cd-
växlare till annat radioprogram? Då är möjligen funktionen Programtyp (PTY-EON)
tillkopplad.
Om Du vill undvika detta, frånkopplar Du funktionen Programtyp (PTY-EON) i
menyn. Tryck först på någon av knapparna AUDIO, SRC eller BND och välj sedan
"PTY off".
För mer information, se avsnittet "Programtyp (PTY)" i bruksanvisningens kapitel
"Radio".
(ES) Observaciones sobre la recepción PTY-EON
Si su equipo Blaupunkt cambia de la emisora de radio que está escuchando a otra,
o de la fuente de sonido seleccionada (CD o cambiadiscos) a una emisora de
radio, verifique si tiene activada la función PTY (tipo de programa).
Si no desea que el equipo cambie automáticamente a emisoras PTY-EON,
desactive dicha función seleccionando la opción “PTY off” en el menú. Pulse
previamente una de las teclas AUDIO, SRC o BND.
Para más detalles, consulte el punto “Tipo de programa (PTY)” en el capítulo
“Modo de radio” de las instrucciones de manejo.
2
(PT) Informação sobre a recepção no modo PTY-EON
Se o seu aparelho mudar de um programa para outro programa ou de uma fonte
que está a ouvir actualmente (CD ou CDC) para um programa radiofónico,
verifique se a função PTY (tipo de programa) está activada.
Se não desejar usar a função PTY-EON, desactive-a no menu escolhendo a opção
“PTY OFF”. Prima anteriormente uma das teclas AUDIO, SRC ou BND.
Para tal, leia também o parágrafo “Tipo de programas (PTY)” no capítulo “Rádio”
nas instruções de serviço.
(DK) Oplysning om PTY-EON-modtagelse
Hvis din Blaupunkt radio slår fra det aktuelle radioprogram over i et andet eller fra
en valgt kilde (CD eller Multi CD) over i et radioprogram, bør du tjekke om du har
tændt for PTY (programtype).
Hvis PTY-EON-omskiftningen ikke ønskes, deaktiveres funktionen med "PTY off" i
menuen. Forinden trykkes på en af tasterne AUDIO, SRC eller BND.
Læs også afsnittet om "Programtype (PTY)" under "Radiodrift" i
betjeningsvejledningen.
(SF) PTY-EON-vastaanottoon liittyvä ohje
Jos Blaupunkt-laite vaihtaa kuuntelemastasi radio-ohjelmasta toiseen radio-
ohjelmaan tai valitsemastasi äänilähteestä (CD tai CD-vaihtaja) johonkin radio-
ohjelmaan, tarkista onko PTY (ohjelmatyypin tunnistus) päällä.
Jos et halua laitteen vaihtavan radio-ohjelmaa automaattisesti PTY-EON-toiminnon
avulla, voit kytkeä sen pois toiminnasta valikossa ("PTY off"). Paina ensin jotain
painikkeista AUDIO, SRC tai BND.
Lue myös käyttöohjeen kohdasta "Radiokäyttö" kappale "Ohjelmatyyppi (PTY)".
(PL) Wskazówki dotyczàce odbioru PTY-EON
Gdy urzàdzenie prze∏àcza si´ z jednej stacji radiowej na innà lub z wybranego
êród∏a audio (CD / zmieniacz CD) na odbiór programu radiowego, to nale˝y
sprawdziç, czy w∏àczony program jest programem typu PTY.
Je˝eli nie chcà Paƒstwo korzystaç z funkcji PTY EON, to prosz´ w odpowiednim
menu wybraç opcj´ „PTY off”. Przed wybraniem tej opcji trzeba wcisnàç jeden z
przycisków AUDIO, SRC lub BND.
Dalsze informacje na ten temat znajdà Paƒstwo w instrukcji obs∏ugi w rozdziale
„Tryb obs∏ugi radia”, w punkcie „Typ programu (PTY)”.
3
(CZ)
U
po
zo
r
n
û
n
í
k
p
fií
j
mu
s
f
u
n
k
c
í
P
T
Y-
E
O
N
Pokud se vበpfiístroj pfiepne ze stanice, kterou právû posloucháte, na jinou
rozhlasovou stanici, nebo ze zvoleného zdroje (CD nebo mûniã CD) na jiné
rozhlasové vysílání, zkontrolujte, jestli není zapnutá funkce PTY (typ programu).
Pokud si nepfiejete, aby do‰lo k pfiepínání pfiístroje funkcí PTY-EON, vypnûte ji
v nabídce bodem „PTY off”. Stisknûte nejprve jedno z tlaãítek AUDIO, SRC nebo
BND.
Bliωí informace k tomuto bodu naleznete v návodu k obsluze v kapitole „ReÏim
rádia” v odstavci „Typ programu (PTY)”.
(HU) Utasítás a PTY-EON vételhez
Ha az Ön Blaupunkt készüléke egy hallgatott rádiómæsorról egy másik
rádiómæsorra vagy egy kiválasztott forrásról (CD vagy CD-váltó) egy rádiómæsorra
kapcsol át, úgy kérjük ellenœrizze, hogy bekapcsolta-e a PTY-t (mæsortípus).
Ha Önnek nem megfelelœ ez a PTY-EON átkapcsolás, kérjük, kapcsolja azt ki a
menüben a „PTY off”-fal. Elœtte azonban nyomja le az AUDIO, SRC vagy BND
gombok egyikét.
Kérjük, ezzel kapcsolatban olvassa el a kezelési útmutató „Rádió üzemmód”
fejezetében a „Mæsortípus (PTY)” c. bekezdést.
(KR) Napomena uz PTY-EON-prijem
Ako Va‰ Blaupunkt ure∂aj prebacuje sa jednog radio-programa na neki drugi ili sa
jednog izabranog izvora (CD ili CD-izmjenjivaã) na neki radio-program, onda
molimo da provjerite, da li ste ukljuãili PTY (tip programa).
Ako ne Ïelite ovo PTY-EON-prebacivanje, onda ga iskljuãite u meniju sa „PTY
off”. Prethodno pritisnite jednu od tipki AUDIO, SRC ili BND.
Molimo Vas, o tome proãitajte i u uputama za upotrebu pod „Rad radija” poglavlje
„Tip programa (PTY)”.
(SE) Napomena uz PTY-EON-prijem
Ako Va‰ Blaupunkt ure∂aj prebacuje sa jednog radio-programa na neki drugi ili sa
jednog izabranog izvora (CD ili CD-izmenjivaã) na neki radio-program, onda
molimo da proverite, da li ste ukljuãili PTY (tip programa).
Ako ne Ïelite ovo PTY-EON-prebacivanje, onda ga iskljuãite u meniju sa “PTY
off”. Prethodno pritisnite jedan od tastera AUDIO, SRC ili BND.
Molimo Vas, o tome proãitajte i u uputstvu za upotrebu pod “Rad radija” pasus
“Tip programa (PTY)”.
4
(SK)
Pokyny
pre
príjem
PTY-EON
Ak Vበprístroj Blaupunkt prepína z poãúvaného rádioprogramu na in˘
rádioprogram alebo z niektorého zvoleného zdroja (CD alebo meniãa CD) na in˘
rádioprogram, tak prosím skontrolujte, ãi ste zapnuli PTY (Program Type).
Ak nechcete toto prepínanie PTY-EON, vypnite ho v menu pomocou “PTY off”.
Stlaãte pred t˘m niektoré z tlaãidiel AUDIO, SRC alebo BND.
Preãítajte si prosím k tomu tieÏ v návode na obsluhu, pod “Rádiová prevádzka”
odsek “Program Type (PTY)”.
(SL) Navodilo za PTY-EON sprejem
Ko se Va‰a Blaupunkt naprava preklopi iz slu‰nega radijskega programma na
drugi radijski program, oziroma iz izbrane zveze (CD ali CD-menjalca) na radijski
program, Vas prosimo, da preverite, ãe ste vklopili PTY (programni-tip).
âe noãete preklop PTY-EON, potem priklopite le-tega v meniju na „PTY off”.
Pritisnite pred tem na tipko AUDIO, SRC oziroma na BND.
Prosimo, da si preberete v navodilih za uporabo pod “radijo delovanje” odstavek
“program-tip (PTY)”.
(TR) PTY-EON yay∂n∂ al∂nmas∂ ile ilgili bilgi
Eπer Blaupunkt cihaz∂n∂z dinlediπiniz bir radyo program∂ndan baµka bir radyo
program∂na veya seçmiµ olduπunuz bir kaynaktan (CD veya CD deπiµtirici) bir
radyo program∂na geçerse, PTY (program tipi) fonksiyonunu açm∂µ olup
olmad∂π∂n∂z∂ lütfen kontrol ediniz.
Eπer bu PTY-EON geçiµini istemiyorsan∂z, bu fonksiyonu menü üzerinden "PTY off"
ile kapat∂n∂z. Bu iµlemden önce AUDIO, SRC veya BND tuµlar∂ndan birine bas∂n∂z.
Lütfen bu konu ile ilgili olarak, kullanma k∂lavuzunda "Radyo modu" bölümündeki
"Program tipi (PTY)" k∂sm∂n∂ okuyunuz.
(
)
-
(
)
,
,
(
).
-
,
“
”.
,
.
’
“
”
“
(
)”.
5
(RU) Указание по приему PTY-EON
При переключении тюнера аппарата Blaupunkt на другую радиостанцию или
переключении с радиоприема на другой источник звука (проигрыватель CD
или CD-чейнджер) проверьте, пожалуйста, включена ли функция PTY (тип
программы). Eсли Вы хотите отключить автоматический выбор программ
PTY-EON, то выключите эту функцию опцией меню "PTY off". Для этого
нажмите одну из следующих клавиш – AUDIO, SRC или BND.
Ознакомьтесь, пожалуйста, с соответствующими инструкциями о включении
автоматического режима выбора программ (PTY) в разделе "Прием
радиопередач" пользовательской документации к Вашему аппарату
Blaupunkt.
6
|