BEFORE USING YOUR HEADSET FOR THE FIRST TIME
BLUETREK G2 user guide
Thank you for choosing the BLUETREK® G2, we hope you will enjoy the convenience
we are bringing to you. The BLUETREK® G2 offers many functions, please read this
manual before getting started.
-
You must charge it continuously for about 8 hours, until the red indicator light
turns off. Please refer to the “Charging the BLUETREK® G2” section of this
manual.
-
Pair the headset with a mobile phone. Please refer to the “Pairing BLUETREK®
G2” section of this manual.
EC-Declaration of Conformity
We, Innovi Technologies Ltd of
31/F China Online Centre,
333 Lockhart Road,
Introduction
The BLUETREK® G2 headset is a wireless headset based on the Bluetooth®
technology. It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-
free profile.
Wan Chai, Hong Kong
declare under our sole responsibility that our product
BLUETREK G2
The BLUETREK® G2 headset has 3 buttons:
•
•
•
“TALK “button (main button),
1 “VOL+ “button,
1 “VOL- “button.
to which this declaration refers is in conformity with the appropriate standards
EN300 328-02
EN301 489-17
EN301 489-01
EN50371
Microphone
VOL - button
Talk button
Indicator light
VOL + button
EN60950
Following the provisions of Radio and Telecommunications Terminal Equipment
directive 1999/5/EC.
Charging
socket
Speaker
November 2005
Guillaume Ponticelli, Director of Development
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference. (2) This device must
accept any interference received, including interference that may cause undesired
operation.
Caution: Changes or modifications to this Bluetooth® headset not expressly approved
by the party responsible for compliance could void the user’s authority to operate it.
Industry Canada notice to users and product statements
To prevent radio interference with the licensed service, this device is intended for
operated indoors and away from windows to provide maximum shielding. Equipment (or
its transmit antenna) that is installed outdoors is subject to licensing.
In compliance with Industry Canada regulations, technical specifications have been
provided in a declaration of conformity. This does not imply that Industry Canada
approved the equipment.
Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer under license.
PAGE 1 / 6
PAGE 2 / 6
Adjusting the volume
Troubleshooting guide
The first thing you should do when encountering a problem that you cannot solve with
this manual, is to switch off your headset and your mobile phone, and switch them on
again.
To increase the volume during an active call, press the “VOL+” button on the headset.
To decrease the volume during an active call, press the “VOL-“ button on the headset.
To find out more, please refer to the trouble shooting frequent asked questions in our
Muting the microphone
Guidelines for safe use
Read those guidelines before using your headset.
To mute the microphone during an active call
During an active call, press and hold the VOL+ button for approximately 2 seconds. A
periodic tone can be heard in the speaker when the microphone is muted.
-
-
-
Do not drop or try to alter the shape of your Headset.
Do not expose your headset to liquid or moisture.
Do not expose your headset to extreme temperatures. Temperature range: 0-
40C.
To end the mute function
When the microphone is muted quickly press the VOL+ button on the BLUETREK® G2.
The periodic tone will end.
-
-
Do not expose your headset to fire or open flames.
Do not try to disassemble your headset. Service and Maintenance can only be
performed by authorized BLUETREK dealers.
Keep your headset away from dust and dirt.
Do not let children play with your headset, since it contains small parts that could
become detached and create a choking hazard.
Check the regulation in your area if you plan to use your headset while driving.
Turn off your headset before boarding an airplane.
Transferring a call from BLUETREK® G2 to the mobile phone
-
-
During an active call, press the TALK button for about 2 seconds.
(This function only works in the Hands-Free Profile.)
-
-
In the Headset profile, you can simply turn off your headset.
CAUTION : Danger of explosion if battery is incorrectly replaced. Dispose of batteries
according to local regulations. Do not dispose as household waste.
Transferring a call from the mobile phone to the BLUETREK® G2
To transfer the call back to the headset, use the menu option on your phone.
Call waiting
When you hear a call waiting alert while you are on a call, press once on the TALK
button to accept the second call.
This function may not be available, depending on your phone’s functionality. However,
you can always answer the second call from your phone keypad.
Additional features with some phones
Rejecting a call
When the headset rings, press the TALK button for about 2 seconds.
Redial the last number
When there is no incoming or active call, press the TALK button for about 2 seconds
until you hear a beep.
PAGE 5 / 6
PAGE 6 / 6
|