English
Ceramic sole plate
ProGlide-jet
PV 2202
PV 2205
PV 2210
Your Braun steam iron has a unique,
new sole plate made out of a special gliding
ceramic material. This process engineered
by Braun makes the sole plate extremely
easy gliding. Thanks to its properties you
will save time during the ironing process.
PV 2212
Type 4692
Steam iron
English
Use Instructions
Guarantee
Service Centers
Praktical Guidelines
Type of Water to be Used
This iron is designed for tap water. However, if
you have hard water we recommend to use a
mixture of 1/2 part tap water and 1/2 part distilled
water from drug stores or grocery stores.
Dry ironing
Set the steam regulator 4in position « »
Jet of steam*
Spray / shot of steam
2-function button:
With the models 2210 and
2212 the functions «water
spray» and «shot of
steam» can be activated
with a 2-function button.
The desired function can
be selected by turning the
button 7as far as it will
go. The marking (blue =
water spray or red = shot
of steam) must point to
the respective function (f).
Turn the button from blue
(spray) to red (shot of
steam) anti-clockwise
(coming from the outlets
pat the slim pointed tip)
o): Caution:
Keep children away from
the jet of steam and do
not hold your fingers in
front of the outlets p
•
(= steam off) (c) for dry ironing. The water
spray 7may be used at any temperature
setting to dampen the laundry. The jet of steam
6and the shot of steam 7buttons can be
activated during dry ironing, provided that the
temperature selector 1is within the continuous
red area
Important: Never use distilled water (battery
water). Do not add any additives (e. g. starch) to
the water.
when activating this function.
When ironing within the red range
area the jet of steam function 6
Steam ironing
(see «Table of features»)
Temperature selection: Set the temperature
selector 1within the red
range steam (b) and wait
To fill iron
1. Pull the plug out of the wall outlet.
can be used (e). To do so, press the button 6at
intervals of no less than 5 seconds. The jet of
steam has been designed not only for steaming
hard to reach areas like pleats, inside of pockets
etc., but also for steaming hanging clothing (e. g.
velvet skirts, curtains, etc.) (g). The jet of steam
functions between horizontal and upright
positions. Be careful not to touch sensitive
textiles with the hot sole plate.
2. Put the steam regulator 4in position « »
(= steam off).
•
until the iron has reached the selected
temperature (i. e. the pilot light 8goes off).
Steam ironing is possible in the entire red range.
Steam ironing at lower temperatures may cause
water drops instead of steam. Should this
happen, turn the steam regulator 4to the
and from red to blue clockwise (f).
3. Open sliding shutter 2.
4. Place the iron in the upright position and fill
with water slowly through the tank opening 2
to the «max.» marking L(a), using the
beaker q.
Storage
After ironing, always pull the plug out of the wall
outlet. Set the temperature selector 1to «min.»
position « » (= steam off) (c).
•
Shot of steam*
(coming from the vents
in the sole plate):
When ironing within the
red area
the shot
of steam function can be
used. It gives an extra,
(b) and the steam regulator 4to « » (= steam
•
5. Close sliding shutter.
Steam regulator 4:
Select the quantity of
steam required (c) for
off) (c).
Selecting the temperature
To empty the iron hold it with the open water tank
opening 2downwards (h) and shake it 1 or 2
times. The pivoting cord 9conveniently winds
up around the cord storage k.
Connect the iron to a safely located wall outlet
and select the ironing temperature with the
temperature selector 1(b). As soon as the pilot
light 8goes out, the iron has reached the
temperature selected. To avoid water dripping,
always rest the iron upright while heating it up
each garment with the
steam regulator 4. You
can increase the quantity
by turning the steam
regulator clockwise (wide
markings) to the end of the red marking.
particularly powerful shot of steam penetrating
deep into the textiles in order to straighten
creases, collars and pleats. The function «shot
of steam» can be used in normal ironing and
also horizontally for steaming hanging clothing
(e. g. velvet skirts, curtains etc.) (g). Press the
shot of steam button 7at intervals of no less
than 5 seconds. When steaming be careful not to
touch sensitive textiles with the hot sole plate.
IMPORTANT: Store the cool steam iron in a dry
place and always standing on its heel rest j.
The sole plate may be damaged by remaining
water if it is stored horizontally. The warranty
does not cover faults or damage resulting from
improper storage of the iron.
keep the steam regulator 4in position « »
(= steam off) (c).
•
Caution: While ironing do not turn the steam
regulator further, otherwise hot water may come
out from the sole plate (see section
You will usually find the following symbols in your
garments:
«Decalcifying/Self-cleaning»).
By turning the steam regulator anti-clockwise
you can reduce the quantity of steam or turn the
Maintenance and Cleaning
To remove residues of minerals/starch from the
sole plate always use steel wool. Never use a
scouring pad, vinegar or other chemicals. The
steam vents mand jet of steam outlets pmay
be cleaned manually with a toothpick, if
necessary. Clean the sole plate regularly if you
use starch or other aids on the clothes for
ironing.
steam off « » (= steam off) (see «Ironing
•
* If pressed too frequently, it can drip. Should this
happen, wait a few seconds before using it
again.
Guide»).
The temperature selector 1is marked with
these symbols:
Constant steam: Your braun steam iron ist
equipped with a special tank configuration to
provide constant steam even when the water
level in the tank is low.
min. The iron is connected
Spray (coming from the
nozzle 3): The spray
function can be used at
any temperature, to
dampen laundry. To do
so, press the button 7
(water spray = blue).
●
Synthetics (acrylic, acetate)
●● Silk/rayon/nylon/polyester/
cotton blends/wool
Extra steam*
(coming from the
steam vents in the sole
plate): For stubborn
creases and wrinkles,
●●● Cotton/linen
max. Linen
Select the temperature you need according to
these symbols.
collars and cuffs.
When ironing within
the red range
Spray, shot of steam, jet of steam
Before you start ironing, we recommend to press
the buttons 3 or 4 times, in order to activate
these functions.
area the extra steam function can
be used. You can press the button 5(d) for 3
seconds at intervals of no less than 15 seconds.
4
5
Decalcifying / Self-cleaning
Cleaning the anti-calc. valve on the steam
regulator
During the time the sole plate is cooling down we
recommend to decalcify the anti-calc. valve in
the following way:
1. Put a small quantity of white vinegar (not
vinegar essence) or lemon juice into a glass or
bowl.
Ironing Guide
Guarantee
We grant a 1 year guarantee on the product
commencing on the date of purchase.
Braun ProGlide-jet irons have a built-in system
(anti-calc. valve) to prevent calcification. It allows
you to clean residues from the steam chamber.
Do not use commercial decalcifiers; they may
damage the sole plate. We recommend to use
the self-cleaning function every 3 months.
To begin ironing, it is best to start with fabrics
requiring a lower temperature (e. g. synthetics),
and continue with those requiring a higher
temperature (e. g. cotton, linen).
Silk and silk-like synthetics tend to waterspot,
therefore before using the water spray feature,
test it on an inconspicuous spot first.
Within the guarantee period we will eliminate,
free of charge, any defects in the appliance
resulting from faults in material or workmanship
either by repairing, or exchanging parts or
exchanging the whole appliance as we may
choose.
2. Immerse just the bot-
tom part of the valve in
the liquid, wait till it is
decalcified and care-
fully brush of remain-
ing residue (E) .
Fabrics
Temperature
regulator
setting
Steam
regulator
setting
Not covered by this guarantee: damage arising
from improper use or storage (operation with
incorrect current/voltage, plugging it into an
unsuitabie power point, breakage use of
commercial decalcifyers, wet storage on the
ironing surface), normal wear and defects which
have a negligible effect on the value or operation
of the appliance.
Synhetics
(acrylic, acetate)
●
(= steam off)
•
Do not use a metal
brush.
Silk, rayon,
nylon, polyester,
cotton blends
●●
(= steam off)
to max.
•
1. Turn the steam regulator 4to the position « »
(= steam off).
•
3. Then, rinse it under
running water without touching the lower end
of the valve.
Wool
●●
(= steam off)
to max.
•
The guarantee becomes void if repairs are
undertaken by unauthorised persons and if
original Braun parts are not used.
2. Fill the water tank to the marking «max.» L
and turn the temperature selector 1to the
●●● marking («self-cleaning» = SC) (A).
Cotton
Linen
●●●
(= steam off)
to max.
•
Re-inserting the steam regulator with anti-calc.
valve
1. Re-insert the steam regulator so that the
The guarantee only comes into force if the date
of purchase is confirmed by the dealer's stamp
and signature on the guarantee card and
registration card.
3. Plug the iron into the socket and wait till the
pilot light 8goes off.
●●●
to max.
(= steam off)
to max.
•
double-arrow
the iron (F).
aligns with the marking on
4. Unplug the iron and hold it over a sink.
Mixed fabrics: Always select the temperature
suited for the most sensitive fibre the garment
contains. Follow manufacturer’s instructions on
the label.
This guarantee extends to every country where
this appliance is supplied by Braun or its
appointed distributor and where no import
restrictions or other legal regulations hinder or
prevent service being given under guarantee.
2. Then push it down carefully and at the same
time turn the button anti-clockwise.
5. Turn the steam regu-
lator 4clockwise to
the end of the red
3. Keep turning the button
marking (B) and then
to the marking « »
•
(= steam off).
Subject to chance without notice.
6. keep turning it to the
double-arrow marking
. The steam regu-
lator will lift (C).
Service under the guarantee does not affect the
expiry date of the guarantee. The guarantee on
parts or entire appliances which are exchanged
ends when the guarantee on this appliance
expires.
4. If your iron has the shot
of steam, refill the tank
with water, heat the
iron up and press the
button 73 to 4 times in
the shot of steam
This product conforms to the
EMC-Requirements as laid down by
the Council Directive 89/336/EEC.
7. Pull out the steam
regulator together with
the valve vertically (D).
Do not touch the lower
end of the anci-calc.
valve with your fingers,
to avoid a possible
greasy film.
In the event of a claim under this guarantee,
hand in the complete appliance with the valid
guarantee card to your dealer, or send both to
the nearest Braun Customer Service Centre.
function before ironing, to rinse the iron.
ATTENTION: The iron must not be used without
the steam regulator and the anti-calc. valve.
All other claims including for damages resulting
from this guarantee are excluded unless our
liability is legally mandatory.
8. Allow all water to drain through the steam
vents in the sole plate, while shaking the iron
slightly.
(Caution: Hot water and steam come out from
the sole plate.)
Those claims arising out of the sales contract
with the vendor are not affected by this
guarantee.
For UK only:
This guarantee in no way affects your rights
under statutory law.
9. Wait for the sole plate to cool down and then
clean it (see «Maintenance and Cleaning»).
10. Make sure that the sole plate is completely dry
before storing it.
6
7
|