[GETTING STARTED]
REFERENCE
Troubleshooting
Error message
PREPARATION
Power Supply & Tape Cassettes
OPERATION
Keyboard & LCD
3
1
2
Make sure that the power is turned off when replacing batteries or tape cassette.
Width
Style
Size
Message
Cause/Remedy
Battery Weak!
Check Battery!
Invalid!
The batteries are weak.
Open the back cover by pressing in the rough area at the top end of the
machine.
If a tape cassette is already
installed, remove it by pulling it
straight up. Also, if batteries are
Cursor
Caps
The installed batteries are about to run out.
• There is no text above the cursor when you set Number-
ing.
• Invalid character is selected for Numbering.
USER'S GUIDE
Underline/Frame
Label Length
• Invalid number is selected for Tab Length or Label Length.
already installed, remove them.
Print head
LN7629001
Printed in China
No Text!
• You tried to print a text file when there is no data stored in
the memory.
Tape cutter lever
• The Print key is pressed when no text is entered.
• You tried to set Copies, Numbering or Mirror when no text
is entered.
Print key
Power key
INTRODUCTION
Line Limit!
• You tried to enter a 3rd line by pressing Enter key.
• You tried to print a 2 line text when 3.5 mm or 6 mm tape is
installed.
Cursor key
With your PT-1280, you can create labels for any application. Select from the
many frames, character sizes and styles to design beautiful custom labels. In
addition, the variety of tape cartridges available allows you to print labels with
different widths and exciting colours.
Function key
Favourite keys
Character key
Preview key
OK key
ESC key
No Cassette!
Cutter Error!
Full!
You tried to print a label when there is no cassette installed.
Tape cutter lever is used in the middle of printing process.
Backspace key
Tab key
Caps key
Shift key
The maximum number of characters (80 characters) have
already been entered.
Enter key
Shift key
Read this manual carefully before starting and keep the manual in a handy
place for future reference.
Insert six new AAA-size alkaline batteries (LR03), making sure that their
poles point in the correct directions. Always replace all six batteries at the
same time using brand new ones.
Text Too Long!
No Frame OK?
The text length exceeds the selected label length or the
selected Auto Format setting length.
Symbol key
Auto Format key
Accent key
Space key
Printing on 3.5 mm tape with invalid Frame setting ON.
GENERAL PRECAUTIONS
(Select
to print with no Frame,
to cancel.)
• Use only Brother TZ tapes with this machine. Do not use tapes that do
not have the
mark.
What to do when...
• The LCD shows one row of 15 characters; however, the text that
you enter can be up to 80 characters in length.
• Do not clean the machine with alcohol or other organic solvents. Only use
a soft, dry cloth.
Problem
Solution
The display stays blank • Check that the batteries are correctly inserted.
after you have turned on • If the batteries are weak, replace them.
• Use Cursor key while holding down Shift key to go to beginning/
end of the text.
• Do not touch the print head mechanism. Use a soft wipe (e.g. a cotton
swab) when cleaning the print head.
the machine.
• Check that the suggested adaptor is correctly connected.
The machine does not • Check that the tape cassette has been inserted correctly.
• To avoid injuries, do not touch the cutter's edge.
Initial Setting
print, or the printed
• If the tape cassette is empty, replace it.
characters are blurred.
• To prevent damage or breakage of the glass, do not press hard on the LCD
display.
Insert a tape cassette, making sure that it snaps into place.
The printed characters • The batteries may be weak. Replace them.
are not formed properly.
Start your machine
Supply power by using six AAA batteries or the optional AC adaptor, and then
End of tape
• Do not put any foreign objects into or heavy objects on the machine.
press
.
The memory has
• The batteries may be weak. Replace them.
Toothed Wheel
• Do not leave any rubber or vinyl on the machine for an extended period of
time, otherwise the machine may be stained.
cleared on its own.
Set the language (English/Spanish/French/Portuguese)
A blank horizontal line
appears through the
printed label.
• There may be some dust on the print head. Remove the
tape cassette and use a dry cotton swab to gently wipe the
print head with an up-and-down motion.
Cutter's edge
• Do not get the machine wet, such as by touching with wet hands or spilling
beverages on to the machine.
• The print head can be cleaned more easily if the optional
print head cleaning cassette (TZ-CL3) is used.
• Do not expose the machine to extremely high temperatures or high
humidity. Never leave it on the dashboard, in the back of your car, near
heaters or other hot appliances. Keep it out of both direct sunlight and rain.
Choose a language with
and press
/
.
The machine has
• Turn off the machine, and then while holding
Tape guide
"locked up" (i.e., nothing
happens when a key is
pressed, even though
the machine is on).
Set the unit (inch/mm)
down
and
, press
to turn the machine back on.
Finally, release
and
.
• Avoid using the machine in extremely dusty places.
• Note: The text and formats in the display and all text files
stored in the memory are erased. Also, the language and
unit settings will be cleared.
Tape exit slot
• Do not pull on the tape being fed from the P-touch, otherwise the tape
cassette may be damaged.
• Make sure that the end of the tape feeds under the tape guides.
• If the ink ribbon is loose, use your finger to wind the toothed wheel in the
direction of the arrow on the cassette.
Choose a unit with
and press
/
.
• Do not attempt to cut the tape while printing or feeding since this will
damage the tape.
• The machine automatically turns off if no key is pressed within 5
minutes.
Specifications
• Use only Brother TZ tapes with this machine.
• Do not try to print labels using an empty tape cassette set in the P-touch.
Doing so will damage the print head.
• To cancel operations, press
.
Item
Specification
Securely close the back cover, making sure that it snaps into place.
After you have installed the tape,
feed the tape (see Feeding)
once and then push in the tape
cutter lever to cut the tape.
• To initialize the settings, turn off the machine and then while
• Remove the batteries and disconnect the AC adaptor if you do not intend
to use the machine for an extended period of time. (Note: When power is
disconnected for more than three minutes, all text shown in the display and
any text files stored in the memory will be lost. Language and unit settings
will also be cleared.)
Dimensions
Weight
160 mm (W) × 151 mm (D) × 60 mm (H)
470 g (without batteries and tape cassette)
holding down
Finally, release
and
and
, press
.
to turn the machine back on.
Power supply
Six AAA-size alkaline batteries (LR03 : not included) or
optional AC adaptor (model AD-5000)
Creating Labels
Tape cassette
Brother TZ tape (width) :
3.5 mm, 6 mm, 9 mm, 12 mm
• Do not use old and new batteries together or mix alkaline batteries with
other type batteries, or set the positive and negative end in the wrong
position. Otherwise, the batteries may leak or be damaged.
Accessories
(Supplies may differ by distribution.)
• Use only the suggested AC adaptor for this machine to prevent any
damage or failure.
Accessories
Stock No.
Tape Cassettes
AC adaptor
See the attached TZ Tape Catalogue.
model AD-5000
When using optional AC adaptor (model
AD-5000)
Cutter Unit
TC-5 (replacement)
If the cutter blade becomes blunt after repetitive use and the tape cannot be
cut cleanly, replace with new cutter unit (stock no. TC-5) by obtaining from an
authorised brother reseller.
Insert the plug on the adaptor cord into
the adaptor jack on the top end of the
machine.
Insert the plug into the nearest standard
electrical outlet.
For memory back up, we recommend using
AAA-size alkaline batteries (LR03) together
when using the AC adaptor.
Be sure to use scissors to cut the fabric tapes. The built-in cutter can-
not completely cut the fabric tapes.
See the reverse side for steps of creating labels.
Download fromWww.Somanuals.com. All Manuals Search And Download.
|