Technical Reference
Title:
Date:
Replacing Power Supply Board
February 25, 2009
Models:
BE-901, BE-901-PC, BE-1201, BE-1201-PC, BES-916, BES-1216
1. Make sure machine is OFF and Unplugged.
2. Remove cover assy. (Six screws removed “A”, Three loosened “B”)
B
A
A
A
A
A
A
3. Identifying Main Bord. (Also: Power Supply, and Head Board)
Head Board
Main Board
Head Board
Power Supply
Main Board
Power Supply
1
7. Once you remove old board you are ready to install the new one. Things to look for
before installing.
A. Fuses: If the new board is missing fuses remove from old board to install on new
board.
8. Installing board, please follow reverse instructions of removal.
9. After board is installed and all plugged in you are ready to plug machine into outlet and
turn on for operation.
3
|