Electronic lockstich button holer
HE-800A
• 21 built-in patterns plus original patterns
• Adjustable presser foot lifter height makes
insertion and removal of the material easier
• Quick and accurate double position cutter
operation
• PD-8000 Programmer uses easy-to-use icon
display (Optional product)
HE-800A
PD-8000
Electronic operation provides a much greater number of pattern
variations and a dramatic improvement in sewing quality
21 built-in sewing patterns plus original patterns
Program selection is as easy as pressing a button. 90 separate programs can be stored in memory.
Furthermore, you can add up to 9 original patterns with programming software for electronic pattern sewer
(optional product).
Rectangle
Rectangle-radial Rectangle-round Rectangle-taper tack Rectangle-tack Radial-rectangle
Radial
Radial-round
Radial-taper tack
Radial-tack
Bar tack
Round-rectangle
Round-radial
Round
Round-taper tack
Round-tack
Eyelet-rectangle
Eyelet-radial
Eyelet-round
Eyelet-taper tack
Eyelet-tack
Easy operation
Easy positioning
• The presser foot lifter is driven by a pulse motor, so that the height can be adjusted
as desired (standard function) for when the pedal is at the neutral position and
when it is depressed forward (two stages) and backward. This makes insertion and
removal of the material easier and reduces working fatigue.
• The presser foot rises only by the height necessary, so that the time needed for it to
rise and drop can be shortened.
Gives perfect sewing finishes
Stable zigzag seams even at high speed
A new needle zigzag mechanism (patent pending) reduces the effect of
vibration from upper shaft rotation on the needle bar, so that stable and
accurate needle zigzagging is obtained even at high speeds. When
sewing speed has been changed, a knife is not used to trim the thread.
The cutter space does not change, further making sure that the finish is
attractive.
Adjustment of zigzag width balance is possible
The left and right stitch width ratio for buttonholes can be set on the operation
panel.
Under lay
Up to four pattern can be combined and sewn together.
Rectangle
Saw shape
• Effective for preventing material from stretching.
• This is useful for preventing dimples from forming during bar
tacking.
• If the seam is hidden and the width seems small, sew 2-3
underlays to make the material look more voluminous.
• It is also effective for strengthening the buttonholes to stop
the seam from unravelling, which can often happen with
materials with coarse weaves.
• Because the material can be move slightly up to five times,
the seam flexibility is maintained and the button hole strength
can also be increased.
Sew together
Zigzag
• If the cutter has operated before the seam has been formed,
the hole made by the cutter is sewn up beforehand.
• The pile of fluffy fabric is pressed down before sewing, so
that the buttonhole finish looks more attractive.
• Effective for preventing seam from unravelling.
Selectable cutter operation
The operation of the cutter can be set to one of four timings (front knife, center
knife, rear knife and front + center knife). When the front knife setting is used, the
rough edges are hemmed by the buttonhole stitches after cutting, thus providing
a more attractive finish. When “Feeding when cutter operating” is set, only the
feed mechanism operates after sewing and the cutter moves to the specified
position, so that the button hole can be cut right up to the front backtacking.
HE-800A
Mechanical button holer
Two-cycle sewing
When set to two-cycle cross sewing, the zigzag stitches sewn
during the first and second cycles do not overlap with each other,
so that the sewing pitch appears finer and the finish looks even
more attractive.
Prevents dimples at the rear tack
Selectable rear tack vector shape prevents dimples at the rear tack
section when not using an underlay.
Standard
Zigzag sewing pitch
0.6m m
0.65m m
0.7m m
The zigzag pitch setting range has been made even finer.You can
now select intermediate pitches which were previously impossible.
0.3m m
0.35m m
0.3m m
0.35m m
0.7m m
0.35m m
0.6m m
0.3m m
0.65m m
Options
Needle plate set, RB
Tape guard winder
Ruler
Sub-table
The elasticity of rubber is used to
make cutting more accurate by
stopping the cutter from getting
stuck in the material and not
returning.
For materials which stretch extremely This makes buttonhole
Increases ease of working when
setting the material.
easily, such as all types of knitted
materials, stronger buttonholes can
be sewn if tape is attached to the
underside of the article being sewn.
positioning quicker and more
accurate.
Specifications
HE-800A-
Application
Automatic
Max. sewing
speed
Thread
1-needle
Button
presser
Lock Stitch
Woven articles such as shirts,
blouses, work clothes and ladies' attire
trimmer
holing
Model
foot lifter
2
3
૽
૽
૽
૽
13 mm
4,000 rpm
HE-800A
Knitted article such as underwear,
sweaters, cardigans and jerseys
Zigzag mechanism
Feed mechanism
Presser foot lifter mechanism
Cutter mechanism
Lower thread holding device
Bobbin presser
Pulse motor
Pulse motor
Peripheral equipment
Pulse motor (standard equipment)
Double position solenoid
Standard equipment
Standard equipment
Standard sewing pattern
Memory pattern
21
90
PS-3000 Programming software
for electronic pattern sewer
This is a software package which
lets you create new patterns using
a personal computer. It can be
used to program any patterns
other than those patterns which
have been pre-programed. (A P-
ROM writer is required.)
Max. number of stitch 700 stitches / program
Needle
Schmetz Nm 134
Data storage method
Power supply
P-ROM (Custom made pattern can be added by PS-3000)
Single-phase : 110V, 220V, 230V, 600VA
Three-phase : 220V, 380V, 400V
Cutter length
4.0 - 32mm
Buttonhole size
Max.sewing width : 6mm
Max.buttonhole length : 40mm
-
-
Motor specification for HE-800A is MD 611 H.
Optional product
PD-8000 Programmer
You can set parameters simply by selecting an icon, so that sewing data
can be created easily. In addition, the programmer can be disconnected
from one sewing machine and connected to another one, so that program
data can be copied between machines. A single programmer can thus be
used to create programs for several machines.
Product specifications are subject to change for improvement without notice. Please read instruction manual before using the machine for safety operation.
R
15-1,Naeshiro-cho,Mizuho-ku,Nagoya 467-8561, Japan.
:81-52-824-2177
Phone
:81-52-811-7789
Fax
To preserve environment, this catalog is produced using the ECF paper (Elemental Chlorine-Free) and SOY INK.
Printed in Japan 2003.12. I3110850B Vol.1
|