LOW-BOY
OIL FURNACE
367AAN
Sizes 105 & 120
Series A
FEATURES
Low-Boy Design—The compact low-boy, dedicated upflow
design is ideal for installation in basements where overhead
space is limited.
The model 367AAN is available in 2 sizes. Each size is
capable of 3 heat/airflow combinations by a simple nozzle
change. Unit 036105 covers inputs of 70,000, 91,000 and
105,000 Btuh, and unit 060120 covers inputs of 119,000,
140,000 and 154,000 Btuh. This eliminates the need to stock 6
separate units.
Venting—The 367AAN has a rear flue outlet. The unit may be
vented using Type L vent material and a factory-approved or
masonry chimney. It may also be sidewall vented with an
approved power venter.
Combustion Chamber/Heat Exchanger—The unique combi-
nation combustion chamber/heat exchanger is made mainly of
stainless and aluminized steel for durability and long life. Its
heat transfer properties make it highly efficient. All seams are
tightly welded for leak-free operation.
Warranties—Limited Lifetime Warranty on combustion
chamber/heat exchanger. Five-year Warranty on Beckett
burner. Two-year Warranty on Honeywell ignition control.
Contact your dealer for details.
Beckett Oil Burner and Honeywell Controls—High quality
Beckett oil burner allows safe and efficient combustion of oil.
Honeywell ignition control and fan timer board provide for
reliable operation and easy connection of thermostat and
accessory wiring.
Casing—Made of 18 gage painted steel for years of durability.
The cabinet features an insulated enclosure for the burner and
controls.
LOW-BOY
OIL FURNACE
Insulation and Soundproofing—A unique silencer along with
insulated walls and rubber blower mounts efficiently controls
combustion noise and vibrations and makes this unit 1 of the
quietest on the market.
The model 367AAN combines high efficiency and quiet
operation with the latest in oil heating technology. The
367AAN is available in 2 sizes. Each size allows for 3 possible
input capacities by a simple nozzle change. The furnace
design is a low-boy style for upflow applications, especially
where space is limited. The components of the 367AAN are
the best available. The 367AAN features a Beckett oil burner
and a Honeywell ignition control and fan timer board. The
367AAN is among the most efficient and quietest oil furnaces
available and will provide years of quality service. As with
other Bryant furnaces, this model is designed to work as part
of a total home comfort system which includes elements for
cooling, air cleaning, humidification, ventilation, and zoning.
Adjustable Blower Speed—Four-speed blower for precise
airflow selection of heating or cooling operation.
Constant Low-Speed Blower Switch—Allows continual low-
speed air circulation through the home to maximize comfort
while maintaining efficiency. Air is constantly filtered and
stagnant air is reduced.
Certifications—The 367AAN is UL and ULC certified. The
efficiency rating is GAMA certified.
Form No. PDS 367A.105.2
SPECIFICATIONS
UNIT SIZE
036105
060120
SHIPPING WEIGHT (Lb)
RATINGS AND PERFORMANCE
Input Btuh
235
260
70,000
91,000
74,000
105,000
85,000
119,000
98,000
140,000
115,000
154,000
125,000
Output Capacity*
Nonweatherized ICS
57,000
Nozzle—100 psig Pump Pressure
Firing Rate (GPH)
0.50—70W 0.65—70W 0.75—70B 0.85—70B 1.00—70W 1.10—70W
0.50
81.4
0.65
81.4
0.75
81.4
0.85
80.6
1.00
80.6
1.10
80.6
AFUE%*
Nonweatherized ICS
Certified Temperature Rise Range °F
Recommended Heating Blower Speed
Heating CFM @ 0.2-in. wc Static Pressure
Cooling CFM @ 0.5-in. wc Static Pressure
ELECTRICAL
55—85
Med-Low
840
55—85
Med-High
1130
55—85
High
55—85
Med-Low
1220
55—85
Med-High
1555
55—85
High
1425
1250
1890
1865
1250
1250
1865
1865
Unit Volts—Hertz—Phase
Operating Voltage Range Min—Max†
Maximum Unit Amps
115—60—1
104—132
15.7
20
12.2
15
Minimum Wire Size (AWG)
Maximum Wire Length (Ft)‡
Maximum Fuse or Ckt Bkr Amps**
Transformer (24v)
14
26
40va
40va
External Control
Heating
Cooling
Power Available
30va
Air Conditioning Blower Relay
BURNER AND CONTROLS
Standard
Beckett
AFG-F6
Beckett AFG-F3
Burner Model (3450 RPM)***
Beckett AFG-F3
Oil Pump Stages
1
Ignition Control
Continuous
Heating Blower Control (Off Delay)
BLOWER DATA
Selectable 60, 90, 120, or 150 Sec
3/4
9.5
Direct-Drive Motor HP (PSC)
Motor Full Load Amps
1/3
6.2
RPM (Nominal)—Speeds
Blower Wheel Diameter X Width (In.)
Filter Size (In.)—Disposable
1075—4
12 X 10
10 X 8
(2) 16 X 20 X 1
(2) 12 X 20 X 1
FACTORY-AUTHORIZED AND LISTED, DEALER-INSTALLED OPTIONS
Electronic Air Cleaner
AIRA
902B
Mechanical Air Cleaner
Air Cleaner Cabinet
KEACA
Humidifier
Model 912D, 912E, 913B, 913C, or 914A
Model VA3B, VB5B, or VC5B
Model VL3A
Heat Recovery Ventilator
Energy Recovery Ventilator
Thermostat—Non-Programmable
For Use with 1-Speed Air Conditioner—TSTATBBNAC01-A
For Use with 2-Speed Air Conditioner—TSTATBBN2S01-A
For Use with 2-Speed Heat Pump—TSTATBBN2S01-A
Thermostat—Programmable
For Use with 1-Speed Air Conditioner—TSTATBBPAC01-A
For Use with 2-Speed Air Conditioner—TSTATBBP2S01-A
For Use with 1-Speed Heat Pump—TSTATBBPDF01-A
For Use with 2-Speed Heat Pump—TSTATBBP2S01-A or TSTATBBPDF01-A
Zoning—2-Zone
ZONEKIT2ZBDP, ZONEBB2KIT01
Zoning—4-Zone
ZONEBB4KIT01
Zoning—8-Zone
ZONEBB8KIT01
OIL NOZZLE KIT†† (QTY-50)
OIL NOZZLE KIT†† (QTY-50)
OIL NOZZLE KIT†† (QTY-50)
OIL NOZZLE KIT‡‡ (QTY-50)
OIL NOZZLE KIT‡‡ (QTY-50)
OIL NOZZLE KIT‡‡(QTY-50)
0.50 GPH For 70,000 Btuh — KLANZ0150050
0.65 GPH For 91,000 Btuh — KLANZ0250065
0.75 GPH For 105,000 Btuh — KLANZ0350075
0.85 GPH For 120,000 Btuh — KLANZ0450085
1.00 GPH For 140,000 Btuh — KLANZ0550100
1.10 GPH For 154,000 Btuh — KLANZ0650110
* Capacity and AFUE in accordance with U.S. Government DOE test procedures.
† Permissible voltage limits for proper furnace operation.
‡ Length shown is measured 1 way along wire path between unit and service panel for maximum 2% voltage drop.
** Time-delay fuse recommended.
*** Beckett AFG-F6 requires field supplied and replacement burner firing head.
†† For unit 036105
‡‡ For unit 060120
ICS—Isolated Combustion System
PSC—Permanent Split Capacitor
As Factory Shipped.
—3—
AIR DELIVERY—CFM (With Filter)
EXTERNAL STATIC PRESSURE IN. WC
UNIT
SIZE
BLOWER
SPEED
0.2
0.3
0.4
0.5
0.6
1170
885
0.7
1030
820
0.8
925
0.9
805
670
500
665
1335
1215
940
655
High
Med-High
Med-Low
Low
1425
1130
840
1350
1045
810
1305
1000
770
1250
950
745
036105
060120
740
685
635
580
725
730
740
745
730
715
690
High
2080
1890
1555
1220
2040
1860
1475
1165
1965
1770
1395
1080
1865
1675
1320
1000
1700
1550
1210
925
1575
1450
1135
855
1475
1330
1050
780
Med-High
Med-Low
Low
SERVICE TRAINING
Packaged Service Training programs are an excellent way to increase your
knowledge of the equipment discussed in this manual, including:
• Unit Familiarization
• Installation Overview
• Maintenance
• Operating Sequence
A large selection of product, theory, and skills programs is available, using popular
video-based formats and materials. All include video and/or slides, plus companion
book.
Classroom Service Training plus "hands-on" the products in our labs can mean
increased confidence that really pays dividends in faster troubleshooting, fewer
callbacks. Course descriptions and schedules are in our catalog.
CALL FOR FREE CATALOG 1-800-962-9212
[ ] Packaged Service Training
[ ] Classroom Service Training
A94328
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
UNIT MUST BE INSTALLED IN ACCORDANCE
WITH INSTALLATION INSTRUCTIONS
Cancels: PDS 367A.105.1B
—4—
© 1998 Bryant Heating & Cooling Systems, 7310 W. Morris St. Indpls, IN 46206
PRINTED IN U.S.A.
Catalog No. 5236-700
1-98
|