®
Bush hog Tough
2426QT Quick attach Front-Push Loaders
Bush hog Quick attach system
®
Bush hog Tough FeaTures
Tough Boxed Boom Design
Tough Large Diameter Cross Tubes
Tough robotic Welds
Tough high strength Chrome Plated
Cylinder rods
Tough Powder Coat Paint
MoDeL
Specifications Based on 1997 ASAE STANDARDS
2426QT
35 - 75
Tractor PTo hP range
2WD/FWa
2WD only
117 inches
108 inches
50°
Maximum Lift height - Measured at Pivot Pin
Maximum Lift height - Under Level Bucket
Maximum Dump angle
Digging Depth
4.5 inches
2990 lbs
1920 lbs
4130 lbs
3020 lbs
4985 lbs
3500 lbs
2400 lbs
3340 lbs
2710 lbs
6 seconds
3 seconds
3.5 seconds
2 seconds
Lift Capacity to Maximum Height - At Pivot Pin
Lift Capacity to Maximum Height - 31.5 inches Forward of Pivot Pin
Lift Capacity to 59 inch Height - At Pivot Pin
Lift Capacity to 59 inch Height - 31.5 inches Forward of Pivot Pin
Breakout Force - At Pivot Pin
Breakout Force - 31.5 inches - Forward of Pivot Pin
rollback Force at Maximum Height - 31.5 inches Forward of Pivot Pin
rollback Force at 59 inch Height - 31.5 inches Forward of Pivot Pin
rollback Force at Ground Level - 31.5 inches Forward of Pivot Pin
raising Time (Ground Level to Full Height)
Lowering Time (Full Height to Ground Level)
Bucket Dumping Time (Full Rollback to Full Dump)
Bucket rollback Time (Full Dump to Full Rollback)
hydraulics
Two 2.0 inch Bore, 23.19 inch Stroke Double Acting Bucket Cylinders and Two 2.25 inch Bore, 29.62 inch Stroke Double Acting Lift Cylinders
specifications Based on Tractor system of
Bush hog Quick attach Buckets
Bush hog Quick attach heavy Duty Buckets
options
2450 PSI hyd. Pressure & 11 GPM pump capacity
Available in 60, 72 and 80 inch widths
Available in 60, 72 and 84 inch widths
Forklift Attachment (42 inch tines), Round Bale Spear, Grapple Fork, Bucket Tine Teeth,
Bolt-On Digging Teeth, Side Cutting Edges, Spill Guard Attachment, Hydraulic Self-Leveling, and Grill Guards
Warranty
1 year limited warranty
FeaTures
Available in major tractor colors
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Page 75
|