Cannon Fishing Equipment 1907000 User Manual

ROD HOLDER & DOWNRIGGER  
TROLLING SYSTEM  
Rod Holders:  
ANGLED FIXED MOUNT 1907000  
Adjustable Single Axis 1907001  
Adjustable Rail Mount 1907020  
Adjustable Clamp Mount 1907021  
Adjustable Dual Axis 1907002  
Adjustable Downrigger Mount 1907022  
(METALLIC)  
1907023  
Adjustable Downrigger Mount  
(BlACK)  
CAUTION:  
READ THIS MANUAL CAREFULLY  
BEFORE OPERATING YOUR  
NEW CANNON ACCESSORY.  
RETAIN FOR FUTURE REFERENCE.  
NOTE: Do not return your CANNON accessory to your  
retailer. Your retailer is not authorized to repair or re-  
place this unit. You may obtain service by:  
calling CANNON at 1-800-227-6433;  
returning your accessory to the Factory Service Center;  
121 Power Drive, Mankato, MN 56001  
Please include proof of purchase and purchase date for  
warranty service with any of the above options.  
Adjustable Dual Axis Rod Holder Shown  
Owner’s Manual  
 
1907022 Adjustable – Downrigger Mount Rod Holder - Metallic  
1907023 Adjustable – Downrigger Mount Rod Holder - Black  
The Adjustable – Dual Axis Rod Holder is also available on a Cannon  
downrigger mount in a metallic or black finish (metallic finish shown right).  
1904015 Rail Mount 3/4” to 1-1/4”  
1904016 Rail Mount 1-1/4” to 2”  
Cannon Rail Mounts allow for the mounting of Cannon Single and Dual  
Axis Rod Holders to round or square rail. Two sizes are available for round and  
square tube styles. Components are made from clear anodized aluminum and  
stainless steel for strength and corrosion resistance.  
1904020 Clamp Mount  
Cannon Rail Mounts allow for the mounting of Cannon single and  
dual axis rod holders to any transom or allowable clamping edge.  
Clamp opens to two and a half inches and is made from clear anodized  
aluminum and stainless steel for strength and corrosion resistance.  
1904000 Deck Mount  
The Cannon Deck Mount plate is a four inch by three inch clear  
anodized aluminum plate which allows the hard mounting of Cannon Dual  
Axis Rod Holders. The plate comes with a black protective mounting boot  
and all mounting hardware.  
3
 
1904025 Aluminum Mounting Track 6”  
1904026 Aluminum Mounting Track 12”  
1904027 Aluminum Mounting Track 18”  
1904028 Aluminum Mounting Track 24”  
1904029 Aluminum Mounting Track 36”  
Cannon tracks allow for flexible mounting positions and easy  
removal of Cannon’s track system accessories. Locking grooves allow  
thumb screws to index with track and prevent accessories from twisting.  
The system is compatible with Cannon, Bert’s, and Traxtech track sys-  
tem products. Components are made from clear anodized aluminum  
and stainless steel for strength and corrosion resistance. All mounting  
hardware included. Available in 6, 12, 18, 24, and 36 inch lengths.  
1904005 Pedestal Mount Track 12”  
1904006 Pedestal Mount Track 18”  
The pedestal mounting track is three inches high and allows for  
mounting of Cannon’s track system accessories. Pedestal can be sur-  
face mounted or slid into mounting track for a variety of mounting posi-  
tions and easy removal. The system is compatible with Cannon, Bert’s,  
and Traxtech track system products. Components are made from clear  
anodized aluminum and stainless steel for strength and corrosion resis-  
tance. Mounting hardware is included. Pedestal is available in twelve  
and eighteen inch track lengths for mounting up to three track system rod holders.  
1904010 Gimbal Mount Track – Side Gunnel  
1904011 Gimbal Mount Track – Stern  
Cannon’s Gimbal Mount Track allow for mounting of Cannon’s  
track system accessories in flush mount rod holders. Thirty degree an-  
gled gimbals have twelve inch tube length with an outer diameter of 1-1/2  
inches. Eighteen inches of track allow for mounting up to three track  
system rod holders. The system is compatible with Cannon, Bert’s, and  
Traxtech track system products. Components are made from clear ano-  
dized aluminum and stainless steel for strength and corrosion resistance.  
1904030 Fixed Base Downrigger Pedestal 4”  
1904031 Fixed Base Downrigger Pedestal 6”  
CAUTION:  
Cannon’s fixed base downrigger pedestals  
can be surface mounted or track mounted for a vari-  
ety of mounting positions and easy removal. The  
3/4” thick aluminum top plate is pre-drilled and  
tapped for mounting Cannon downriggers as well as  
most Scotty®, Big Jon®, Penn®, Vector, Proos,  
The Cannon Pedestal  
Mount is intended for  
use with a Track that is  
mounted directly to the  
deck of the boat ONLY.  
Fishlander and Walker downriggers. Components are made from clear ano-  
dized aluminum and stainless steel for strength and corrosion resistance. The  
fixed base downrigger pedestals are compatible with Cannon, Bert’s, and  
Traxstech track systems. Available in 4” and 6” heights.  
4
 
1904032 Swivel Base Downrigger Pedestal 4”  
1904033 Swivel Base Downrigger Pedestal 6”  
Cannon’s swivel base downrigger pedestals can be surface  
mounted or track mounted for a variety of mounting positions and easy re-  
moval. With 16 locking points, these downrigger pedestals allow for 360°  
downrigger rotation with locking points every 22.5°. The 3/4” thick aluminum  
top plate is pre-drilled and tapped for mounting Cannon downriggers as well  
as most Scotty®, Big Jon®, Penn®, Vector, Proos, Fishlander and Walker  
downriggers. Bearing system ensures smooth swivel action even while a  
downrigger weight is attached. Components are made from clear anodized  
aluminum and stainless steel for strength and corrosion resistance. The  
swivel base downrigger pedestals are compatible with Cannon, Bert’s, and  
Traxstech track systems. Available in 4” and 6” heights.  
Rod Holder \ Accessory Compatibility  
Mounts  
Track Mount  
Gimbal Track Mount Pedestal Track Mount  
Rail Mount  
Clamp Mount  
Deck Mount  
Rod Holde r  
Angled Fixed Mount  
Adjustable Single Axis  
Adjustable Dual Axis  
*
*
*
*
- Compatible  
- Not Compatible * - Compatible with removal of track mount plate  
Pedestal Mount \ Accessory Compatibility  
Mounts  
Track Mount  
Gimbal Track Mount Pedestal Track Mount  
Rail Mount  
Clamp Mount  
Deck Mount  
Pedestal  
4" Fixed Mount  
6" Fixed Mount  
4" Swivel Mount  
6" Swivel Mount  
- Compatible  
- Not Compatible  
Part  
Part Number Description  
USED ON  
Replacement Parts  
1904005, 1904006, 1904010, 1904018, 1904025,  
1904026, 1904027, 1904028, 1904029  
3396562  
3390210  
3393413  
3391515  
33986110  
END CAP  
VINYL CAP  
1907000  
THUMB SCREW  
CAP ROD HOLDER  
WEAR TIP  
1907000, 1907001, 1907002, 1904005, 1904006  
1907001, 1907002, 1907020, 1907021, 1907022,  
1907023  
1907001, 1907002, 1907020, 1907021, 1907022,  
1907023  
5
 
CANNON® LIMITED WARRANTY  
Johnson Outdoors Inc. warrants to the original purchaser that the accompanying product (see exclusions below) is free from  
defects in material or workmanship for a period of one (1) year from the date of purchase. Within the warranty period, Johnson  
Outdoors Inc. will, at its option, either repair or replace same without charge (but no cash refunds will be made). The unit must be  
returned, prepaid and with proof of the date of purchase to the following:  
Johnson Outdoors, Inc Cannon Division, 121 Power Drive, Mankato, MN 56001  
This limited warranty may be enforced only by the original purchaser; all subsequent purchasers acquire the product "as is" with-  
out any benefit of this limited warranty. Repair or replacement of the product as set forth in this limited warranty shall be the origi-  
nal purchaser’s sole and exclusive remedy and Johnson Outdoors Inc.’s sole and exclusive liability for breach of this warranty.  
EXCLUSIONS  
This warranty does not apply in the following circumstances:  
When the product has been connected, installed, combined, altered, adjusted, serviced, repaired, or handled in a manner  
other than according to the instructions furnished with the product  
When a serial number has been defaced, altered, or removed  
When any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, carelessness, or abnormal  
use, or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owner's  
manual  
LIMITATION AND EXCLUSION OF IMPLIED WARRANTIES AND CERTAIN DAMAGES  
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THESE LIMITED WARRANTIES. JOHNSON OUTDOORS INC.  
DISCLAIMS LIABILITY FOR INCIDENTAL AND CONSEQUENTIAL DAMAGES, AND IN NO EVENT SHALL ANY IMPLIED WAR-  
RANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, EX-  
TEND BEYOND ONE YEAR FROM THE DATE OF PURCHASE. THIS WRITING CONSTITUTES THE ENTIRE AGREEMENT  
OF THE PARTIES WITH RESPECT TO THE SUBJECT MATTER HEREOF; NO WAIVER OR AMENDMENT SHALL BE VALID  
UNLESS IN WRITING SIGNED BY JOHNSON OUTDOORS INC.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of consequential dam-  
ages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also  
have other rights that vary from state to state.  
Johnson Outdoors, Inc. / Cannon Division  
121 Power Drive, Mankato, MN 56001  
1-800-227-6433  
© 2008 Johnson Outdoors, Inc. All rights reserved.  
To download product manuals or purchase Cannon products from an authorized dealer, please visit our web page at www.cannondownriggers.com  
WARNING: This product contains chemical(s) known to the state of California to cause cancer and/or reproductive toxicity.  
Product protected by United States Patent number des. D573685, D573686, D574920  
Form No. 3397120 Rev D  
6
 

Blackberry Baby Gym 9780 User Manual
Black Box Network Router AC508A User Manual
Bolens Cultivator 769 02280 User Manual
Bosch Appliances Range HES7052U User Manual
Breville Toaster BOV800 User Manual
Brother Typewriter AX 325 User Manual
Cabletron Systems Satellite Radio 9033073 User Manual
Cabletron Systems Switch FPIM 02 User Manual
Canon Camcorder ZR60 User Manual
Char Broil Gas Grill 463263110 User Manual