VB-C50FSi Network Camera
Architect & Engineer Specification
5/2/07
(800) OK-CANON
Bid Spec
1.0 Description
Network camera should be of fixed type. The network camera shall have an ultra long zoom lens.
Camera should have motion detection built-in. Network camera should be capable of receiving
power and data through a single Ethernet cable (PoE).The network camera should be VGA
resolution and have Motion-JPEG compression at up to 30 frames per second. The camera shall
have simultaneous video distribution in various frame sizes. Network camera shall have a
motorized IR cut filter. Network camera shall have 10 zoom presets. Camera should have two-
way audio.
2.0 Bid Specification
Technology:
a. The network camera shall use a genuine Canon long zoom lens with a 26X optical zoom
and an additional 12X digital zoom.
b. Network camera shall be powered via PoE and be in compliance with IEEE802.3af
standard.
c. Video compression should be MJPEG.
d. Network camera should have three selectable resolutions of 640 x 480, 320 x 240, and
160 x 120 and simultaneous distribution of all three resolutions.
e. Camera should have Day/Night switching mode with motorized IR cut filter.
f. Shall have two-way audio, G.711 µ-law (8 kHz PCM - 64kbps).
g. Shall have 10 presets for different zoom views to be saved.
h. Should allow up to 50 users to access network camera simultaneously.
Image Adjustments
a. Network camera shall have auto focus and manual focus.
b. Network camera shall have auto white balance and manual white balance controls.
c. Network camera shall have manual settings for image quality.
d. Network camera shall have auto exposure and manual exposure controls.
e. Network camera shall have shade correction software to brighten dark areas without
changing the already bright areas.
User Friendly Features:
a. Network camera shall have auto MAC address detection upon plugging in power.
b. Network camera shall be powered over the Ethernet to allow for cheaper installations.
c. Network camera shall allow still images, audio, schedule, date, time, presets, and
panorama settings to be stored on board camera.
Inputs and Outputs:
a. Network camera shall have 1 LAN port (RJ45, 100Base-TX/10Base-T auto negotiation)
b. Network camera shall have Audio IN/Out (using optional expansion unit): 3.5 monaural*
mini-jacks. IN: Electret condenser monaural microphone input, plug-in power (3.3 V).
OUT: line-level output.
c. Network camera shall have Video IN/OUT: composite video - BNC terminal, 1 each.*
d. Network camera shall have External device I/O: input x 2, output x 3.*
e. Network camera shall have port for optional AC Adapter.
f. Network camera shall have RS-232C (for service use only)*.
* Using optional expansion unit.
Ratings:
a. The network camera shall have power input of 100V to 240V/ 50/60Hz (using AC
Adapter).
b. The network camera shall use Power over Ethernet in compliance with IEEE802.3af
standard.
c. Network camera shall have power consumption of Max. approx. 10W or less.
Specifications
Video Signal
Conforms to NTSC
Image Sensor
¼-inch CCD (primary color filter)
680,000 (effective 340,000)
2 : 1 interlaced
Number of Pixels
Scanning Method
Min. Subject Illumination
Imaging Modes
Normal mode: 1 lux (at 1/30 sec.) / Night mode: 0 lux
Day mode / Night mode
Auto/Manual Wide-angle: 0.01 m (0.03 ft.) to inf.; Telephoto: 1.6 m (5.25ft.) to inf.
(In night mode, Wide-angle: 0.02 m (0.07 ft.) to inf.; Telephoto: 2.3 m (7.55ft.) to
inf.)
Focusing
Aperture
Lens
Auto iris servo system
Focal length 3.5 to 91.0 mm, f/1.6 to f/4.0, 26 × power zoom
(shooting at infinity)
Operating system
Server
Linux
HTTP, FTP, Webview Livescope
Syslog format
Log Management
Infrared Cut Filter
White Balance
Power-driven insertion / removal (Day mode / Night mode)
TTL system: Auto
Protocols
HTTP, DHCP, WV-HTTP (from Canon)
Motion-JPEG compression (movie) JPEG (still image)
NTSC: 0.1fps-30fps
Video Compression Method
Video Compression Rate
Audio Compression Method
Output Video Size
G.711µ-law(64kbps) full duplex
160 x 120, 320 x 240, 640 x 480
Camera Control
zoom, brightness, shutter speed, focus speed, control time restriction
Access Control (with password), video connection time, service period, number of
concurrent connections (max. 50)
Connection Controls
Network
Network: LAN x 1 (RJ45, 100Base-TX / 10Base-T auto-negotiation)
Video IN/OUT: NTSC/PAL composite video - BNC terminal (1 each)*
Audio IN/OUT: monaural, mini-jack (1)*
Multi-Connector
IN: Electret condenser monaural microphone input, plug-in power (3.3 V)
OUT: Line-level output
External Device I/O: Input = 2, Output = 3*
RS-232C (for service use only)*
*Connector for using the Multi-Terminal Module (sold separately)
2.60 × 5.28 × 3.81 in. (W × D × H)
Approx. 1.17 lb
Dimensions
Weight
Operating Environment
Power
Temperature= 0 - 40°C, humidity 20 - 85% RH (condensation free)
AC adapter for 100VAC to 240 VAC or IEEE 802.3af compliant
Max: Approx. 10W or less
Power consumption
|