Casio Projector XJ UT310WN User Manual

EN/FR/ES  
English  
DATA PROJECTOR  
XJ-UT310WN  
SeBteuspurGe tuoikdeeep all user documentation  
handy for future reference.  
To obtain the latest version of this  
manual visit the website at the URL  
below.  
Français  
GuCiodnesedrveinz slatdaollcautmioenntation à portée  
de main pour toute référence future.  
Pour obtenir la toute dernière version de  
ce manuel, consultez le site à l’adresse  
suivante.  
Español  
GuAsíaegdúeresceodneftiegnuerraacmióanno toda la  
documentación del usuario para  
futuras consultas.  
Para obtener la versión más reciente de  
este manual, visite nuestro sitio web en  
la siguiente URL.  
 
Safety Precautions  
Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before trying to  
use it. After reading this User’s Guide, keep it in a safe place for future reference.  
About safety symbols  
Various symbols are used in this User’s Guide and on the product itself to ensure safe use, and to  
protect you and others against the risk of injury and against material damage. The meaning of each of the  
symbols is explained below.  
This symbol indicates information that, if ignored or applied incorrectly,  
creates the risk of death or serious personal injury.  
Danger  
*
*
This symbol indicates information that, if ignored or applied incorrectly, could  
possibly create the risk of death or serious personal injury.  
Warning  
This symbol indicates information that, if ignored or applied incorrectly, could  
possibly create the risk of personal injury or material damage.  
Caution  
*
Icon Examples  
A triangle indicates a situation against which you need to exercise caution. The example shown  
here indicates you should take precaution against electric shock.  
!
$
A circle with a line through it indicates information about an action that you should not perform.  
The specific action is indicated by the figure inside the circle. The example shown here means  
disassembly is prohibited.  
A black circle indicates information about an action that you must perform. The specific action  
is indicated by the figure inside the circle. The example shown here indicates you must unplug  
the power cord from the power outlet.  
Precautions During Use  
Malfunction  
Immediately stop using the projector if  
*Warning  
the screen appears abnormal, or if any  
other abnormal operation occurs even  
though you are operating the projector  
correctly. Continued use creates the risk  
of fire and electric shock. Immediately  
perform the following steps.  
-
Adult supervision is required  
whenever there are young children  
present and especially when there is  
the possibility of young children  
coming into contact with the  
projector.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
Smoke, odor, heat, and other  
abnormalities  
Should you ever notice smoke, strange  
odor, or any other abnormality,  
immediately stop using the projector.  
Continued use creates the risk of fire and  
electric shock. Immediately perform the  
following steps.  
-
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
EN-1  
 
   
Safety Precautions  
Power cord  
Water and foreign matter  
Misuse of the power cord creates the risk  
of fire and electric shock.  
Make sure that you always observe the  
following precautions.  
Never allow water to get on the projector.  
Water creates the risk of fire and electric  
shock.  
+
+
%
%
Never place a vase or any other container  
of water on top of the projector. Water  
creates the risk of fire and electric shock.  
Water or other liquid, or foreign matter  
(metal, etc.) getting into the projector  
creates the risk of fire and electric shock.  
Should anything get inside the projector,  
immediately perform the following steps.  
• Be sure to use only the accessories that come  
with the projector.  
• Make sure that you use a power source with the  
same voltage as that specified for the projector.  
• Do not overload a power outlet with too many  
devices.  
• Do not locate the power cord near a stove.  
• Do not use the power cord that comes with the  
projector with any other device.  
• Do not share the outlet supplying power to the  
projector with other devices. If you are using an  
extension cord, make sure that the ampere rating  
of the extension cord is compatible with the  
power consumption value of this projector.  
• Never use the power cord while it is still bundled  
together.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
Disassembly and modification  
Never try to take the projector apart or  
modify it in any way. The projector  
contains a large number of high-voltage  
components that create the risk of  
electric shock and burn injury. Also, note  
that problems caused by unauthorized  
projector disassembly or modification are  
not covered by the warranty and are not  
eligible for repair by CASIO.  
• Use a conveniently located power outlet that you  
can reach easily when you need to unplug the  
projector.  
!
A damaged power cord creates the risk  
of fire and electric shock.  
Make sure that you always observe the  
-
following precautions.  
• Never place heavy objects on the power cord  
and never expose it to heat.  
Be sure to leave all internal inspection, adjustment,  
and repair up to your original dealer or authorized  
CASIO service center.  
• Make sure the power cord is not pinched  
between the wall and the rack or table where the  
projector is located, and never cover the power  
cord with a cushion or other object.  
• Never try to modify the power cord, allow it to  
become damaged, or subject it to excessive  
bending.  
Dropping and impact  
Continued use of the projector after it has  
been damaged by dropping or other  
mistreatment creates the risk of fire and  
electric shock. Immediately perform the  
following steps.  
-
• Do not twist the power cord or pull on it.  
Never touch the power cord or plug while  
your hands are wet.  
Doing so creates the risk of electric  
shock.  
Turn off the projector.  
Unplug the projector.  
Contact your original dealer or authorized  
CASIO service center.  
1.  
2.  
3.  
"
• When using this projector in the country where  
you purchased it, be sure to use the power cord  
that came with it. Whenever using the projector  
in another country, be sure to purchase and use  
a power cord that is rated for the voltage of that  
country. Also make sure that you are aware of  
the Safety Standards that apply in that country.  
When going out, make sure the projector  
is in a location away from pets and other  
animals, and unplug the power plug from  
the power outlet. A power cord damaged  
by chewing can cause shorts, and  
creates the risk of fire.  
-
EN-2  
 
Safety Precautions  
Disposal by burning  
Exhaust vents  
Never try to dispose of the projector by  
The exhaust vents become very hot while the  
projector is running. Never touch them. Doing so  
creates the risk of burn injury. The areas near the  
exhaust vents also become quite hot. Never locate  
objects made of plastic or other heat-sensitive  
materials near or under the projector. Doing so  
creates the risk of deformation and discoloration of  
the object.  
burning it. Doing so can cause an  
explosion, which creates the risk of fire  
and personal injury.  
-
Projector light emission  
• Never look directly into the lens, intake  
vents, or exhaust vents while the light is  
-
on. When turning on the projector, check  
Location  
Never locate the projector in any of the following  
types of locations. Doing so creates the risk of fire  
and electric shock.  
• Near an area subject to strong vibration  
• An area subject to large amounts of moisture or  
dust  
• Food preparation areas and other locations  
where there is the chance of contact with oil  
smoke, and areas where there are large amounts  
of tobacco smoke present.  
• Near a heater, on a heated carpet, or in an area  
exposed to direct sunlight  
• An area subject to temperature extremes  
(Operating temperature range is 5°C to 35°C  
(41°F to 95°F)).  
to make sure that no one is looking  
directly into its lens, intake vents, or  
exhaust vents. The strong light emitted  
by the projector creates the risk of eye  
damage.  
• Do not attempt to use a magnifying  
glass, mirror, or other similar object to  
bend or reflect the projector’s light, and  
never hold or place such object in the  
path of the projector’s light. Refracted or  
reflected light can shine into a person’s  
eyes and create the risk of eye damage.  
Blocking the vents  
Never allow the vents to become  
blocked. Doing so causes internal heat  
build-up, which creates the risk of fire  
and breakdown of the projector.  
Touching the projector while it is hot  
creates the risk of burn injury. Make sure  
that you always observe the following  
precautions.  
-
Heavy objects  
Never place heavy objects on the projector or  
climb on top of the projector. Doing so creates the  
risk of fire and electric shock.  
Water  
• Maintain a distance of at least 6 cm (2.4 inches)  
between the front of the projector (from which  
light is being emitted) and the projection surface  
(screen). Maintain a distance of at least 30 cm  
(11.8 inches) between surfaces and the other  
sides of the projector.  
Never locate the projector in a bathroom or  
anywhere else there is the chance that it will be  
splashed with water.  
Unstable location  
• Do not insert the projector into any space where  
air circulation is poor.  
• Never cover the projector with a blanket or any  
similar item.  
• Locate the projector on a firm, flat surface during  
use. Never use the projector while it is on a  
carpet, blanket, towel, seat cushion, or other  
pliable surface.  
Never place the projector on an unstable  
surface or on a high shelf. Doing so can  
cause it to fall, creating the risk of  
personal injury.  
-
• Never stand the projector up on either end during  
use.  
Projector cabinet  
Never open the projector’s cabinet.  
Doing so creates the risk of electric  
shock.  
Cleaning  
Before cleaning the projector, be sure to  
turn it off and unplug it from the power  
outlet. Failure to do so creates the risk of  
electric shock.  
$
EN-3  
 
Safety Precautions  
Using the projector on a base with  
casters  
*Caution  
Whenever using the projector on a base that has  
casters, make sure that you lock the casters when  
not moving the base.  
Power cord  
Misuse of the power cord creates the risk  
of fire and electric shock. Make sure that  
you always observe the following  
precautions.  
-
Lightening  
During a lightening storm, do not touch the plug of  
the projector’s power cord.  
• When unplugging the power cord, always grasp  
the plug, and do not pull on the power cord.  
• Insert the plug into the power outlet as far as it  
will go.  
Remote controller  
Never try to take the remote controller  
• After using the projector, unplug it from the  
power outlet.  
apart or modify it in any way. Doing so  
creates the risk of electric shock, burn  
injury, and other personal injury. Be sure  
to leave all internal inspection,  
adjustment, and repair up to your original  
dealer or authorized CASIO service  
center.  
!
• Unplug the projector from the power outlet if you  
do not plan to use it for a long time.  
• At least once a year, unplug the power plug and  
use a dry cloth or vacuum cleaner to clear dust  
from the area around the prongs of the power  
plug.  
• Never use detergent to clean the power cord,  
especially the power plug and jack.  
• Before moving the projector, be sure to turn it off  
and unplug it from the power outlet first.  
Never allow the remote controller to  
become wet. Water creates the risk of fire  
and electric shock.  
+
Radio waves emitted by the wireless  
adapter  
Backup of important data  
Never use this product inside of an  
aircraft or medical facility, or in any other  
location where use of such devices is  
prohibited. Radio waves can have an  
effect on the operation of electronic  
equipment and medical equipment, and  
cause accidents.  
Do not use this product in the vicinity of  
high-precision electronic instruments or  
Be sure to keep separate written records  
of all data stored in projector memory.  
Memory data can be lost due to  
breakdown, maintenance, etc.  
-
+
During projection, make sure there is  
nothing in front of the lens blocking  
the light.  
An object in front of the lens creates the risk of fire.  
-
electronic devices that handle weak radio  
Lens effect  
signals. Radio waves can have an effect  
on the operation of such equipment, and  
cause accidents.  
Never have an aquarium or any other object that  
produces a lens effect in front of the projector  
while the light source unit is on. Such an object  
creates the risk of fire.  
• If you are using a pace maker or any other  
electronic medical device, be sure to consult  
your physician or device manufacturer before  
using this product.  
Lens  
Never touch the lens with your hand.  
Wireless adapter  
Keep the wireless adapter out of the  
reach of small children. Accidental  
swallowing of a wireless adapter can  
interfere with proper breathing and create  
a life-threatening situation.  
-
EN-4  
 
Safety Precautions  
Battery Precautions  
Other  
*Danger  
*Caution  
Should liquid leaking from an alkaline  
Allowing dust to build up inside the projector by  
not cleaning it for long periods creates the risk of  
fire and accident, and can cause loss of projection  
luminosity. Contact your original dealer or  
authorized CASIO service center once a year about  
having the interior of the projector cleaned. Note  
that you will be charged for cleaning.  
battery get into the eyes, immediately take  
the following steps.  
+
Do not rub the eyes! Wash the eyes with clean  
water.  
1.  
Contact a physician immediately. Failure to  
take immediate action can lead to loss of  
eyesight.  
2.  
Be sure to follow all applicable local  
laws and regulations, and do not  
dismantle the projector when  
disposing of it.  
*Warning  
Misuse of batteries can cause them to leak and  
stain the area around them, or to explode, creating  
the risk of fire and personal injury. Make sure that  
you always observe the following precautions.  
• Never try to take batteries apart and do  
not allow them to become shorted.  
-
• Never expose batteries to heat or throw  
them into fire.  
• Never mix old batteries and new ones.  
• Never mix batteries of different types.  
• Never try to charge batteries.  
• Take care that batteries are oriented  
correctly when you load them.  
+
*
Caution  
Misuse of batteries can cause them to leak and  
stain the area around them, or to explode, creating  
the risk of fire and personal injury. Make sure that  
you always observe the following precaution.  
• Use only the type of batteries that is  
specified for the remote controller.  
-
Dead batteries  
Be sure to remove batteries from the remote  
controller as soon as they go dead.  
• Remove batteries from the remote  
controller if you do not plan to use it for a  
+
Disposing of batteries  
long time.  
Make sure that you dispose of used batteries in  
accordance with the rules and regulations in your  
local area.  
EN-5  
 
Safety Precautions  
The normal minimum age for viewing 3D  
images is six. When 3D images are being  
watched by a small child, a competent  
adult should be on hand to monitor the  
child, to ensure that the 3D images are  
suitable for the child, that the child does  
not watch the 3D images for too long an  
uninterrupted period, etc.  
3D Glasses  
+
*Warning  
3D images should not be viewed by the  
types of individuals described below.  
Doing so creates the risk of loss of  
health.  
-
• Individuals with heart disease  
• Individuals with a history of photodermatosis  
• Individuals with epileptic tendencies  
*Caution  
Do not view 3D images if you are  
experiencing any of the symptoms  
described below.  
-
• When you are in poor physical condition  
• When you feel you are losing your health  
• Should you ever experience fatigue, loss of  
health, or abnormal feelings while watching 3D  
images, stop watching. Continued watching  
could damage your health.  
• Should the 3D image ever start appearing double  
or lose its three-dimensionality, stop watching.  
Continued watching can cause eye fatigue.  
Avoid watching 3D images for very long  
periods. Doing so can cause eye fatigue.  
-
Be sure to observe the following  
precautions when watching 3D images.  
+
Take care about nearby people and  
objects.  
Viewing 3D images can interfere with distance  
judgment, so you should take care about nearby  
people and objects when extending your arms or  
making sudden movements. Failure to do so  
creates the risk of material damage and personal  
injury.  
Use 3D glasses when viewing 3D  
images.  
Watching 3D images without 3D glasses can cause  
eye fatigue. Always use the specified 3D glasses  
whenever viewing 3D images.  
You need to wear your glasses or any  
other devices you normally use for  
vision correction.  
If you normally wear glasses or contact lenses, you  
should be wearing them when you watch 3D  
images with the 3D glasses. Failure to do so  
creates the risk of eye fatigue or abnormal vision.  
EN-6  
 
Operating Precautions  
About the Light Source Unit  
z The projector’s light source unit uses a laser and LED.  
z The life of the light source unit is rated at approximately 20,000 hours. The actual life will depend on  
use conditions, the settings configured on the setup menu, and differences between each individual  
light source unit.  
z The light source unit is warranted for the period noted on the warranty certificate or for 6,000 hours,  
whichever comes first.  
z The failure of the light source unit to light or a noticeable drop in light source unit brightness indicates  
the end of the light source unit’s life. Contact your original dealer or authorized CASIO service center  
for replacement. Note that problems caused by unauthorized projector disassembly or modification  
are not covered by the warranty and are not eligible for repair by CASIO.  
EN-7  
 
   
Operating Precautions  
Vent Outlets  
• Vent outlets become very hot during projection. Never touch vents or allow them to become blocked.  
• Do not insert foreign objects.  
Bottom  
Projector Light Emission  
• Never look directly into the light source while the light is on.  
EN-8  
 
Operating Precautions  
Other Precautions  
This projector is made of precision components. Failure to observe the following precautions can result  
in inability to correctly save data and malfunction.  
Never use or store the projector in the following locations. Doing so creates the  
risk of malfunction of and damage to the projector.  
z Locations subjected to electrostatic charge  
z Locations subjected to temperature extremes  
z Locations where there is extreme moisture  
z Locations subjected to sudden temperature changes  
z Locations where there is a lot of dust  
z On a shaky, slanted, or otherwise unstable surface  
z Locations where there is the danger of getting wet  
z Locations where there are large amounts of oil smoke or other smoke  
Ensure that the remote control signal receiver is not exposed fluorescent light,  
sunlight, or other strong light. Strong light can cause malfunction.  
Avoid using the projector under the following conditions. Such conditions  
create the risk of malfunction of and damage to the projector.  
z Avoid areas subject to temperature extremes (operating temperature range is 5°C to 35°C (41°F to  
95°F)).  
z Never place heavy objects on the projector or climb on top of the projector.  
z Never insert or allow foreign objects to drop into the projector.  
z Never place a vase or any other container of water on top of the projector.  
Whenever setting the projector down or performing any operation that involves  
moving or reorienting it, take care that you do not pinch your fingers under the  
projector.  
Never leave dead batteries inside the remote controller for a long time.  
Dead batteries can leak, which leads to malfunction of and damage to the remote controller. Be sure to  
replace the batteries at least once every one year, no matter how much you use the remote controller  
during that time.  
Clean with a soft, dry cloth.  
When very dirty, use a soft cloth that has been dampened in a weak solution of water and a mild neutral  
detergent. Wring all excess water from the cloth before wiping. Never use thinner, benzine, or any other  
volatile agent to clean the projector. Doing so can remove its markings and cause staining of the case.  
Missing Screen Dots  
Though this projector is manufactured using the most advanced digital technology available today, some  
of the dots on the screen may be missing. This is normal, and does not indicate malfunction.  
Never subject the projector to strong impact while it is projecting.  
If the projector is accidentally subjected to strong impact, the projection image will momentarily go  
blank. The image will reappear after some time, but it may be the wrong color or it may be accompanied  
by an error message.  
If the projected image is the wrong color, re-select the current input source. If this does not return the  
projected image to its proper color, turn projector power off and then back on again.  
If the image reappears with an error message, correct the problem in accordance with the indicator  
explanations under “Error Indicators and Warning Messages” in the User’s Guide.  
Use a power outlet near the projector. Always use the projector so that the  
power cord can be easily unplugged.  
EN-9  
 
Operating Precautions  
Keystone Correction and Image Quality  
Performing keystone correction causes the image to be compressed before it is projected. This can  
result distortion of the image or a loss of image quality. If this happens, change orientation of the  
projector and/or screen so it conforms as much as possible to the illustration under “Setting Up the  
Projector” in the User’s Guide.  
If image quality is the highest priority, turn off auto keystone correction and position the projector so it is  
pointed straight at the screen.  
z Even if your projector is still within the warranty period, you will be charged for repair if a problem is  
due to running the projector non-stop for very long periods (like 24 hours) or if the projector was set up  
and used without following the “Setup Precautions” in the User’s Guide.  
z Use under high ambient temperature or in environments subjected to large amounts of dust, oil  
smoke, tobacco smoke, or other types of smoke can shorten the replacement cycles and require more  
frequent replacement of the optical engine and other components. Note that you are charged for such  
replacement. For details about replacement cycles and fees, contact an authorized CASIO service  
center.  
Precaution when Handling the Projector after Use  
The projector’s exhaust vents and the area around the vents  
become very hot during operation, and will still be hot immediately  
after turning off the projector. Because of this, you should hold the  
sides of the projector as shown in the illustration whenever  
moving it.  
Cleaning the Projector  
z Periodically clean the projector exterior, lens, intake vents, and exhaust vents on a regular basis.  
z When cleaning the lens, do not apply undue force and take care to avoid damaging it.  
z Dust and dirt tend to collect around the intake vents. Because of this, you should use a vacuum  
cleaner to clean away accumulated dust and dirt periodically.  
z Continued use of the projector after dust has accumulated around the intake vents can cause  
overheating of internal components and lead to malfunction.  
z Certain operating conditions also can cause dirt and dust to accumulate around the projector’s  
exhaust vents. If this happens, use the same procedure as that described above to clean the exhaust  
vents.  
EN-10  
 
General Guide  
Projection lens  
Control panel  
Remote control signal receiver  
Exhaust vents (left side)  
Indicators  
[P] (Power) key  
Brightness sensor  
Intake vents  
Intake vents  
Security bar  
AC Terminal  
Focus lever  
Terminals  
Security lock hole  
Control Panel and Indicators  
[ENTER] key  
[AUTO] key  
[INPUT] key  
[P] (Power) key  
[MENU] key  
POWER/STANDBY indicator  
LIGHT indicator  
TEMP indicator  
[ESC] key  
Brightness sensor  
Cursor keys (q/w/U/I)  
EN-11  
 
 
Quick Guide  
This section explains the operational flow up to the point that projection is started.  
For more individual operations, see the “User’s Guide” (UsersGuide.pdf).  
1. Load batteries into the remote controller.  
“To load remote controller batteries” (User’s Guide)  
2. Place the projector onto a table, desk, or stand that is level and firm, making sure  
that you allow enough room around it.  
“Setting Up the Projector”, “Setup Precautions” (User’s Guide)  
EN-7).  
z You will need to purchase special hardware to hang this projector from a ceiling or to mount it on  
a wall. For details, contact the retailer where you purchased the projector.  
3. Adjust the vertical angle of the  
projector.  
1Rotate the single foot on the bottom front of  
the projector to fine adjust the projector’s  
vertical angle.  
2Rotate the two feet on the bottom back of the  
projector to fine adjust the projector’s  
horizontal angle.  
1
2
4. Use the supplied power cord to plug the projector into a power outlet.  
5. Connect the projector to an image output device and then turn on the device.  
“Connecting Projector Cables” (User’s Guide)  
6. Press the [P] (Power) key to turn on the projector.  
z The first time you turn on the projector, a “Language” window will appear in the center of the  
projection screen. Select the language you want.  
7. Use the [INPUT] key to select the input source.  
“Selecting the Input Source” (User’s Guide)  
8. Use the focus lever to adjust the focus.  
9. After you finish projecting, press the [P] (Power) key.  
z This will cause a power down confirmation message to appear. Press the [P] (Power) key again  
to turn off the projector.  
NOTE  
z This product is also designed for IT power distribution system with phase-to-phase voltage 230V.  
EN-12  
 
 
Quick Guide  
If you run into problems...  
If you experience any problems while operating the projector or if you suspect that the projector is not  
operating properly, refer to the “Troubleshooting” section in the “User’s Guide” (UsersGuide.pdf).  
Attaching and Removing the Cable Cover  
To attach the cable cover  
1. If the projector is on, turn it off and wait until it cools down.  
2. Unplug the projector power cord from the power outlet.  
3. Turn the projector over and insert the cable cover hook into the hole provided on  
the projector (Figure 1).  
4. Rotate the cable cover in the direction indicated by the arrow in Figure 2 to attach it  
to the projector.  
z The cable cover screw should be aligned with the projector screw hole (Figure 3).  
5. Use a Phillips head screwdriver to tighten the screw (Figure 4).  
Hook  
Screw  
Figure 1  
Figure 2  
Figure 3  
Figure 4  
Screw hole  
Screw  
To remove the cable cover  
1. If the projector is on, turn it off and wait until it cools down.  
2. Unplug the projector power cord from the power outlet.  
3. Use a Phillips head screw driver to loosen the cable cover screw until it disengages  
from the projector (without detaching it from the cover).  
4. Remove the screw side of the cable cover from the projector and then unhook the  
cover hook from the projector.  
EN-13  
 
Specifications  
Model Name  
Display system  
XJ-UT310WN  
DLP® chip × 1, DLP® system  
WXGA 0.65 inches (Aspect ratio: 16:10)  
1,024,000 (1280 × 800)  
Fixed zoom, manual focus  
F 2.3 / f 4.2  
Display Chip  
Projection Lens  
Light Source  
Chip Size  
Number of Pixels  
Laser and LED  
Projected Image Size  
50 to 110 inches  
Projection  
Distance  
60 inches  
0.13 meters (0.4 feet)  
0.40 meters (1.3 feet)  
100 inches  
Minimum Projection  
Distance  
0.06 meters (0.2 feet)  
Gamut  
Full color (16.77 million colors)  
3100 lumens  
Brightness  
Contrast Ratio (Full White / Black)  
1800:1  
Scanning  
Frequencies  
Horizontal  
Vertical  
15 to 102 kHz  
50 to 120 Hz  
Display  
Resolution  
RGB Signal  
Native: 1280 × 800  
Maximum: 1600 × 1200 (UXGA) resizing  
Maximum: 1920 × 1080 (HDTV 1080P)  
Maximum: 1920 × 1080 (HDTV 1080P)  
NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM  
Component Signal  
HDMI Signal  
Video Signal  
Terminals  
RGB Input  
COMPUTER terminal: RGB 15-pin mini D-Sub × 2  
Used for both RGB input and component (YCbCr/YPbPr)  
input.  
Component Input  
RGB Output  
MONITOR OUT terminal: RGB 15-pin mini D-Sub × 1  
Digital Video Input  
HDMI input terminal: HDMI type A terminal × 1  
HDCP support, audio signal support  
Analog Video Input  
Audio Input  
Composite (RCA) terminal × 1, S-video terminal × 1  
RCA R/L terminals, 3.5 mm stereo mini jack × 2  
3.5 mm stereo mini jack × 1  
Audio Output  
Mic Input *1  
USB Host  
3.5 mm monaural mini jack × 1  
USB type A × 1  
USB Device  
USB type B × 1  
Micro-USB type B × 1: For logo data registration  
Control Terminal  
LAN Terminal  
RS-232C (D-sub 9 pin) × 1  
RJ-45 × 1  
Wireless Support *2  
IEEE 802.11b/g/n compatible  
16W × 1, Monaural  
Speaker  
Operating Temperature  
Operating Humidity  
Operating Altitude  
5 to 35°C (41 to 95°F)  
20 to 80% (non-condensation)  
0 to 3,000 meters (0 to 10,000 feet) above sea level  
100 to 240V AC, 50/60Hz  
Power Requirements  
EN-14  
 
 
Specifications  
Model Name  
XJ-UT310WN  
Power Consumption (100 to 240V)  
Eco Level 1 when Eco Mode is “On”  
Eco Level 5 when Eco Mode is “On”  
185W  
110W  
When “Bright” is selected for Eco Off  
Mode.  
230W  
205W  
When “Normal” is selected for Eco  
Off Mode.  
Standby Power Consumption (100 to 120V)  
When “Disable” is specified for  
0.12W  
2.3W  
“Remote On” *3  
When “Enable” is specified for  
“Remote On” *3  
Standby Power Consumption (220 to 240 V)  
When “Disable” is specified for  
0.23W  
2.6W  
“Remote On” *3  
When “Enable” is specified for  
“Remote On” *3  
Approximate Dimensions *4  
338 (W) × 333 (D) × 153 (H) mm (13.3" × 13.1" × 6")  
(Including projections)  
Approximate Weight *4  
5.5kg (12.1lbs)  
*1 Plug-in power type microphones are not supported.  
*2 With connection of provided wireless adapter to USB-A port on the back of the projector.  
*3 For information about configuring the Remote On setting, see the separate “Network Function  
Guide”.  
*4 Excluding cable cover.  
Specifications are subject to change without notice.  
EN-15  
 
Specifications  
GPL and LGPL  
(1) This product uses software (This Software) that comes under the GNU General Public License  
(GPL) and GNU Lesser General Public License (LGPL). In accordance with the GPL and LGPL, the  
source code of This Software is open source code. Anyone who wishes to view the open source  
code can do so by downloading it from the CASIO Projector download site. Whenever copying,  
modifying, or distributing This Software, be sure to do so in accordance with the terms and  
conditions of the GPL and LGPL.  
(2) This Software is provided “as is” without expressed or implied warranty of any kind. However, this  
disclaimer does not affect the terms and conditions of the warranty of the product itself (including  
malfunctions due to This Software).  
(3) The full text of the GPL and LGPL that covers this software can be found at the back of the “User’s  
Guide”. The “User’s Guide” for this projector is included with the files that you download from the  
website whose URL is provided on the cover of this manual.  
z DLP is a registered trademark of Texas Instruments Incorporated of the United States.  
z Microsoft, Windows, Windows Vista, and PowerPoint are registered trademarks or trademarks of Microsoft  
Corporation in the United States and other countries.  
z HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of  
HDMI Licensing, LLC.  
z Apple and Macintosh are registered trademarks of Apple Inc. of the United States.  
z Adobe and Reader are registered trademarks of Adobe Systems Incorporated.  
z XGA is a registered trademark of IBM Corporation of the United States.  
z Other company and product names may be registered trademarks or trademarks of their respective  
owners.  
EN-16  
 
GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not  
applicable to other areas).  
NOTICE  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communication. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause harmful interference to radio  
or television reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following measures:  
z
z
z
z
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
FCC CAUTION  
Changes or modifications not expressly approved by the party responsible for compliance could void  
the user’s authority to operate the equipment.  
Proper connectors must be used for connection to host computer and/or peripherals in order to meet  
FCC emission limits.  
Connector cable....XJ-UT310WN unit to PC  
Declaration of Conformity  
Model Number: XJ-UT310WN  
Trade Name: CASIO COMPUTER CO., LTD.  
Responsible party: CASIO AMERICA, INC.  
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801  
Telephone number: 973-361-5400  
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference, and (2) this device must accept any interference  
received, including interference that may cause undesired operation.  
 
FCC Information  
This device, Wireless LAN USB Adapter, complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept  
any interference received; including interference that may cause undesired operation.  
Federal Communications Commission (FCC) Statement  
This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to  
radio communications. However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by  
one or more of the following measures:  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment and receiver.  
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
— Consult the dealer or an experienced radio/TV technician for help.  
CAUTION: Changes or modifications to this unit not expressly approved by the party  
responsible for compliance could void the user authority to operate the  
equipment.  
Tested to comply with FCC standard. FOR HOME OR OFFICE USE.  
FCC RF Radiation Exposure Statement:  
1. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment,  
under 47 CFR 2.1093 paragraph (d)(2).  
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  
The Wireless LAN USB Adapter has been tested to the FCC exposure requirements (Specific Absorption  
Rate).  
XJ-UT310WN  
FOR CALIFORNIA USA ONLY  
Perchlorate Material – special handling may apply.  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.  
 
Manufacturer:  
CASIO COMPUTER CO., LTD.  
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan  
Responsible within the European Union:  
CASIO EUROPE GmbH  
Casio-Platz 1, 22848 Norderstedt, Germany  
 
Printed in Japan  
Imprimé au Japon  
MA1405-A  
RJA530975-002  
 

Beko Washer 2820523327_FL User Manual
Belkin Network Card F5D6020 User Manual
Belkin Network Router F5D7233 User Manual
Black Box Computer Hardware LHC201A User Manual
Blue Rhino Charcoal Grill BC3121 User Manual
Blue Rhino Fire Pit WAD808WDNC User Manual
Bosch Appliances Speaker LC2 PC30G6 4 User Manual
Bose Speaker System SOUNDLINK AIR User Manual
Casio Digital Camera EX S9 User Manual
Casio PDAs Smartphones MPC 501 User Manual