Casio Video Game Keyboard CS 2X User Manual

CS2X-ES-1A  
ES  
Parts List  
CS-2X  
CASIO KEYBOARD STAND  
Fastening tape × 8  
Bolt × 1  
Allen wrench × 1  
Nut × 1  
4 pieces per set. Use when  
changing the stand height, etc.  
CASIO COMPUTER CO.,LTD.  
6-2, Hon-machi 1-chome  
Shibuya-ku, Tokyo 151-8543, Japan  
User’s Guide  
Cushioning sponges × 3  
Washer × 1  
MA1007-A Printed in China  
Safety Precautions  
Stand Assembly / Mounting the Keyboard onto the Stand  
Congratulations on your selection of the CASIO Product.  
1. With the longer lengths of horizontal piping  
towards the floor, pull the short pipes apart  
WARNING  
*
l Before using the instrument, be sure to carefully read  
through the instructions contained in this leaflet.  
l Be sure to keep all user documentation handy for  
future reference.  
(a)  
to expand the stand.  
Fix the stand in its open position. As shown  
Do not climb up onto the instrument or stand.  
«
Doing so can cause the stand to tip over, creating  
the risk of personal injury. Particular care concerning  
this precaution is required where small children are  
present.  
(a)  
at  
in Figure 1, pass the bolt through the  
«
Symbols  
washer and then through the hole in the  
stand. Affix the nut and then tighten with  
the Allen wrench that comes with the stand.  
Tighten the bolt to the point that there is no  
space between the washer and bolt.  
Various symbols are used in this leaflet and on the  
product itself to ensure that the product is used safely  
and correctly, and to prevent injury to the user and other  
persons as well as damage to property. Those symbols  
along with their meanings are shown below.  
(a)  
(a)  
CAUTION  
*
You can adjust the stand to either of two  
heights.  
About the stand  
WARNING  
*
l This stand is intended for use with a CASIO Digital  
Keyboard only.  
Improper use of this stand can cause the  
instrument to fall or the stand to tip over, creating  
the risk of personal injury.  
Be sure to observe the following points.  
Use this stand only with the CASIO Digital  
Keyboard model for which it is intended.  
Do not try to use this stand for any other purpose  
or application.  
Be sure to remove the instrument from the stand  
before trying to move the stand.  
This indication stipulates matters that have the risk  
of causing death or serious injury if the product is  
operated incorrectly while ignoring this indication.  
2. Affix the fastening tape to the bottom of the  
instrument as shown in Figure 2.  
Position four pieces of tape so they align with  
the tape on the stand, as shown in Figure 1 (a).  
CAUTION  
*
This indication stipulates matters that have the risk  
of causing injury as well as matters for which there is  
the likelihood of occurrence of physical damage only  
if the product is operated incorrectly while ignoring  
this indication.  
3. Place the instrument onto the stand  
(Figure 3).  
Figure 1  
Adjust the position of the instrument so the  
pieces of fastening tape engage with each  
other.  
Be sure to remove the instrument from the stand  
before trying to adjust the height of the stand.  
The bolt of the stand can work loose due to the  
effects of temperature and humidity changes,  
vibration, and other factors. Because of this, you  
need to periodically check the bolt for proper  
tightness.  
WARNING  
*
If the stand is unstable, affix the cushioning  
sponges to the pipes of the legs (Figure 4).  
Peel the tape from the backs of the sponges  
and then install them.  
Be sure to remove the instrument from the  
stand before affixing the sponges.  
*
Do not allow the bag to be placed over the  
head or ingested.  
Never place the plastic bag this stand comes in  
over your head or in your mouth. Doing so creates  
the risk of suffocation. Particular care concerning  
this precaution is required where small children are  
present.  
l Be sure to follow the assembly instructions  
precisely when assembling the stand and mounting  
the instrument on it. Failure to adequately tighten  
the bolt or improper positioning of the instrument  
can cause the stand to tip over and the instrument  
to fall, creating the risk of personal injury.  
l When placing the instrument onto the stand, take  
care that you do not pinch your fingers.  
l Never remove the bolt while the instrument is  
mounted on the stand. Doing so can cause the  
keyboard to fall and creates the risk of your hands  
becoming pinched by the stand legs.  
Figure 2  
Avoid locating the instrument or stand on  
an unstable surface.  
Do not locate the instrument or stand on an unsteady  
platform, on an uneven surface, or in any other  
unstable location. Doing so can cause the stand to fall  
over, creating the risk of personal injury.  
About the stand  
Do not place heavy objects on the keyboard.  
l When using the stand, make sure the two longer  
lengths of horizontal piping are on the floor (shorter  
lengths under the instrument). Never try to use the  
stand while it is upside down.  
Do not place heavy objects on the keyboard. This  
may cause the keyboard to tip over or fall off the  
stand.  
l Do not drop the stand or otherwise subject it to  
strong impact.  
Figure 3  
Figure 4  
 

Black Box Cable Box AC211A R2 User Manual
Black Box Network Hardware 8x8 DVI D Matrix Switches User Manual
Black Decker Planer 7698K User Manual
Blue Rhino Electric Heater 62900 User Manual
Bogen Microphone UDMS800BP User Manual
Broil King Electric Grill 9887 14 User Manual
Canon Film Camera AV 1 User Manual
Cateye Home Gym EC L32OO User Manual
Cecilware Fryer EL 6 User Manual
Channel Vision Home Security System C 1201 User Manual