Casio Watch 2253 1 User Manual

2253-1  
Module No. 2253  
GENERAL GUIDE  
If the contents of the display seem to be continually changing, see “AUTO DISPLAY FUNCTION” for information on how to stop it.  
Press C to change from mode to mode.  
In any mode, press L to illuminate the display for about two seconds.  
Caution  
The backlight of this watch employs an electro-luminescent (EL) light, which loses its illuminating power after very long term use.  
Frequent use of the backlight shortens the battery life.  
The watch emits an audible sound whenever the display is illuminated. This is because the EL light vibrates slightly when lit. It does not indicate malfunction of the watch.  
Timekeeping Mode  
File Mode  
Alarm Mode  
Stopwatch Mode  
To input File data  
TIMEKEEPING MODE  
1. In the File Mode, press B or D until the new  
This watch lets you select any two of 40 cities (TIME 1, TIME 2) as basic Timekeeping  
Mode times. Hold down D to toggle the Timekeeping Mode between TIME 1 and TIME 2.  
You can display either the city code or year. Press A to toggle between display  
of the city code and year.  
data display appears.  
If the message “FULL” appears on the display, it  
means that memory is full. To store more data,  
you will first have to delete some of the data.  
2. Hold down A until the flashing cursor appears  
on the name area.  
3. Use B or D to input a character at the cursor  
position. The character changes in the  
following sequence. Holding down either  
button changes the character at high speed.  
City code  
Day of week  
Press A.  
Year  
Month-Day  
Remaining  
memory  
[New data display]  
TIME 1  
Hold down D.  
Press A.  
Hold down D.  
PressD.  
(Space)  
A to Z  
0 to 9  
/
DST on  
indicator  
Press  
B.  
TIME 2  
4. After you select the character you want, press C to advance the cursor to the  
right.  
Repeat steps 3 and 4 until you complete name input.  
To set the time and date  
Setting the time and date for either of the basic times (TIME 1 or TIME 2)  
automatically adjusts the settings of the other basic time.  
You can turn daylight saving time (DST) on and off independently for TIME 1 and  
TIME 2.  
1. While in the Timekeeping Mode, hold down A until the City Code flashes on the  
display.  
2. Press C to change the selection (flashing) in the following sequence.  
You can input up to 8 characters in the name area.  
5. After the name input is through, use C to move the cursor to the number area.  
6. While the cursor is in the number area, use B or D to input a number you want.  
The character changes in the following sequence. Holding down either button  
changes the character at high speed.  
D.  
Press  
– (Hyphen)  
0 to 9  
(Space)  
Press B.  
City Code  
DST  
Seconds  
Hour  
Minutes  
7. After you select the character you want, press C to advance the cursor to the  
right.  
Repeat steps 6 and 7 until you complete number input.  
8. After inputting the data you want, press A to store it into memory.  
The message “SORT” appears on the display for a few seconds.  
The name area shows only 5 characters, but automatically scrolls from right to left  
to show all of the characters that make up the text.  
12/24-Hour  
Format  
Day  
Month  
Year  
3. While the seconds setting is selected (flashing), press D to reset it to 00. If you  
press D while the seconds setting is in the range of 30 to 59, the seconds are  
reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of  
00 to 29, the minutes count is unchanged.  
While City Code setting is selected (flashing), press D or B to scroll through the  
City Code. (For full information on City Code, see the CITY CODE TABLE.)  
While the DST setting is selected, press D to toggle it ON and OFF.  
While the 12/24-hour format setting is selected, press D to toggle it between 12  
and 24.  
While any other setting is selected (flashing), press D to increase it or B to  
decrease it.  
Holding down either button changes the setting at high speed.  
4. After you set the time and date, press A to return to the Timekeeping Mode.  
The day of the week is automatically set in accordance with the date.  
The date can be set within the range of January 1, 1995 to December 31, 2039.  
If you do not operate any button for a few minutes while a setting is flashing, the  
flashing stops and the watch goes back to the Timekeeping Mode automatically.  
To scroll through File data  
In the normal File Mode (when the display is not flashing), press D to scroll  
forward or B to scroll backward through stored data.  
The data item that is displayed when you exit the File Mode will be the first data  
to appear when you enter the File Mode again.  
To edit File data  
1. In the File Mode, use B and D to scroll through the data items and display the  
one you want to edit.  
2. Hold down A until the flashing cursor appears on the display.  
3. Use C to move the cursor to the character you want to change.  
4. Use B or D to select the character you want.  
For details, see “To input File data” (steps 3 through 4 for name input, or 6  
through 7 for number).  
5. After editing the data, press A to store it.  
To delete File data  
1. In the File Mode, use B and D to scroll through the data items and display the  
one you want to delete.  
FILE MODE  
2. Hold down A until the flashing cursor appears on the display.  
3. Press B and D at the same time to delete the data item.  
The message “CLR” (clear) appears on the display for a few seconds.  
At this time the cursor appears on the display ready for input.  
4. Input data or press A to return to the File Mode.  
Caution  
The following causes all data stored in memory to be deleted. Be sure to always  
keep separate written copies of all important data.  
• Malfunction or repairs  
• Dead battery  
• Battery replacement  
In no event will CASIO be liable for loss of data or any damages arising out of  
such loss.  
The File Mode lets you store up to 30 pairs  
of name and telephone number data. The  
name can be up to 8 characters long and the  
number up to 12 digits. Data is automatically  
sorted into alphabetical order based on the  
name data. You can recall data by scrolling  
through it on the display.  
Mode indicator  
If you do not operate any button for a few  
minutes while in the File Mode, the watch  
automatically goes back to the  
Number  
area  
Timekeeping Mode.  
Name area  
 

Bose Headphones 3 User Manual
Bowers Wilkins Portable Speaker CDM CSE User Manual
Briggs Stratton Portable Generator 1679 0 User Manual
Bushnell Telescope 78 8831, 78 8846 User Manual
Cambridge Audio Stereo System LK10 User Manual
Canon Camera Lens 1257B002 User Manual
Cecilware Cooktop IC 18A User Manual
Chauvet Marine Lighting Wash LED 150 User Manual
Chauvet Thermostat FC 4 User Manual
Cisco Systems Network Card NSS3000 Series User Manual