Casio Watch MA0307 EA User Manual

MA0307-EA  
Operation Guide 2673  
About This Manual  
Button operations are indicated using the letters shown  
in the illustration.  
This watch is equipped with two color LCD panels. For  
the sake of simplicity, the screen shots in this manual  
are shown using only one color.  
Each section of this manual provides you with the  
information you need to perform operations in each  
mode. Further details and technical information can be  
found in the “Reference” section.  
(Light)  
General Guide  
Press Cto change from mode to mode.  
In any mode, press Lto illuminate the display.  
Countdown Timer Mode  
Stopwatch Mode  
Timekeeping Mode  
Animation Mode  
World Time Mode  
Alarm Mode  
Press  
C.  
Timekeeping  
Use the Timekeeping Mode to set and view the current time and date.  
Pressing Din the Timekeeping Mode cycles through available screen formats as  
shown below.  
Daylight Saving Time (DST)  
Daylight Saving Time (summer time) advances the time setting by one hour from Standard  
Time. Remember that not all countries or even local areas use Daylight Saving Time.  
Seconds Screen  
Month Day  
Screen  
Month – Day  
Screen (color)  
Seconds Screen  
(color)  
To toggle the Timekeeping Mode time between DST and Standard Time  
PM indicator Day of week  
1. In the Timekeeping Mode, hold down Auntil the  
DST indicator  
Press  
.
seconds start to flash, which indicates the setting  
screen.  
2. Press Cto display the DST setting screen.  
ON  
3. Press Dto toggle between Daylight Saving Time (  
)
OFF  
and Standard Time (  
4. Press Ato exit the setting screen.  
).  
Seconds  
Hour : Minutes  
Month – Day  
The DST indicator appears on the display to indicate  
that Daylight Saving Time is turned on.  
When a color screen (seconds screen, month-day screen) is selected in the  
Timekeeping Mode, the current time that appears at the bottom of the display in  
other modes is also shown in color.  
Using Graphic Animations  
Read This Before You Set the Time and Date !  
In the Animation Mode, the current time is shown in the  
lower part of the display, and a graphic animation is  
displayed in the center of the display. You can specify one  
of three different animation patterns.  
Animation pattern  
The times displayed in the Timekeeping Mode and World Time Mode are linked.  
Because of this, make sure you select a city code for your Home City (the city where  
you normally use the watch) before you set the time and date.  
You can also configure the Animation Mode so it  
automatically displays the current time (as kept in the  
Timekeeping Mode) for about three seconds whenever  
you angle the watch towards your face for reading.  
To set the time and date  
1. In the Timekeeping Mode, hold down Auntil the  
seconds start to flash, which indicates the setting  
screen.  
2. Press Cto move the flashing in the sequence shown  
below to select other settings.  
Timekeeping Mode time  
(Hour : Minutes)  
Animation Patterns  
You can select any one of the following three animation  
patterns for the Animation Mode.  
Animal (Dolphin Dog Cat)  
Baby-G (B A B Y G)  
Seconds count of current time  
Seconds  
Message  
DST  
Day  
City Code  
Year  
Hour  
Minutes  
12/24-Hour  
Format  
Month  
To select an animation pattern  
1. Use Cto enter the Animation Mode.  
2. In the Animation Mode, each press of Dcycles  
through the animation patterns in the sequence shown  
below.  
3. When the setting you want to change is flashing, use Dand Bto change it as  
described below.  
Screen  
To do this:  
Do this:  
Animal  
Baby-G  
Seconds  
50  
00  
Reset the seconds to  
Press D.  
Press D.  
ON  
Toggle between Daylight Saving Time (  
)
OFF  
OFF  
and Standard Time (  
)
Preset Message Display  
Change the city code  
Use D(east) and B(west).  
Use D(+) and B().  
Press D.  
TYO  
When the Animal animation pattern is selected, the watch will also display preset  
message selected by you in the Timekeeping Mode at the timing shown below.  
P10:58  
Change the hour or minutes  
12H  
Toggle between 12-hour (  
) and 24-hour  
Dolphin  
Message  
Dog  
Cat  
12H  
24H  
(
) timekeeping  
2003  
6-30  
Change the year  
Use D(+) and B().  
Note that the preset message does not appear if you disable the preset message  
function.  
Change the month or day  
Change the message  
OFF  
To select a preset message  
1. Use Cto enter the Timekeeping Mode.  
Message  
For full information on city codes, see the City Code Table.  
See Daylight Saving Time (DST)for details about DST setting.  
2. In the Timekeeping Mode, hold down Auntil the  
seconds start to flash, which indicates the setting  
screen.  
The preset message you select here appears in the Animation Mode. See Using  
Graphic Animations for more information.  
3. Press Cnine times to advance to the preset message  
See the list of preset messages for information about the preset messages that  
selection screen.  
are available.  
4. Use D(+) and B() to scroll through the preset  
4. Press Ato exit the setting screen.  
messages until the one you want appears on the  
display.  
To disable the preset message function, display  
With the 12-hour format, the P (PM) indicator appears on the display for times in the  
range of noon to 11:59 p.m. and the A (AM) indicator appears for times in the range  
of midnight to 11:59 a.m. The A and P indicators are not displayed with the current  
time at the bottom of the display in other modes.  
OFF  
On/Preset message  
function disabled (Off)  
in step 4.  
With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without  
any indicator.  
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is  
applied in all modes.  
The day of the week is automatically displayed in accordance with the date (year,  
month, and day) settings.  
1
 
Operation Guide 2673  
Reference  
City Code Table  
This section contains more detailed and technical information about watch operation.  
It also contains important precautions and notes about the various features and  
functions of this watch.  
City  
GMT  
City  
Other major cities in same time zone  
Code  
Differential  
PPG PAGO PAGO  
HNL HONOLULU  
ANC ANCHORAGE  
11  
10  
09  
PAPEETE  
NOME  
Auto Display  
SAN FRANCISCO, LAS VEGAS, VANCOUVER, SEATTLE,  
DAWSON CITY  
EL PASO, EDMONTON  
HOUSTON, DALLAS/FORT WORTH, NEW ORLEANS,  
MEXICO CITY, WINNIPEG  
MONTREAL, DETROIT, MIAMI, BOSTON, PANAMA CITY,  
HAVANA, LIMA, BOGOTA  
LAX LOS ANGELES  
08  
07  
06  
Auto Display continually changes the contents of the  
digital display.  
DEN  
CHI  
DENVER  
CHICAGO  
To turn off Auto Display  
Press any button (except for L) to turn off Auto Display.  
NYC  
CCS  
NEW YORK  
CARACAS  
05  
04  
03  
LA PAZ, SANTIAGO, PORT OF SPAIN  
SAO PAULO, BUENOS AIRES, BRASILIA, MONTEVIDEO  
To turn on Auto Display  
RIO RIO DE JANEIRO  
In the Timekeeping Mode, hold down Cfor about three  
seconds until the watch beeps.  
Note that Auto Display cannot be performed while a  
setting screen is on the display.  
LON  
LONDON  
+00  
+01  
+02  
DUBLIN, LISBON, CASABLANCA, DAKAR, ABIDJAN  
PAR  
BER  
CAI  
PARIS  
BERLIN  
CAIRO  
MILAN, ROME, MADRID, AMSTERDAM, ALGIERS,  
HAMBURG, FRANKFURT, VIENNA, STOCKHOLM  
ATHENS, HELSINKI, ISTANBUL, BEIRUT, DAMASCUS,  
CAPE TOWN  
JRS JERUSALEM  
JED  
THR  
DXB  
KBL  
KHI  
DEL  
DAC  
RGN  
BKK  
JEDDAH  
TEHRAN  
DUBAI  
KABUL  
KARACHI  
DELHI  
DHAKA  
YANGON  
BANGKOK  
+03  
+3.5  
+04  
+4.5  
+05  
+5.5  
+06  
+6.5  
+07  
KUWAIT, RIYADH, ADEN, ADDIS ABABA, NAIROBI, MOSCOW  
SHIRAZ  
ABU DHABI, MUSCAT  
Auto Return Features  
If you leave a screen with flashing digits on the display for two or three minutes  
without performing any operation, the watch automatically saves any settings you  
have made up to that point and exits the setting screen.  
MALE  
MUMBAI, KOLKATA  
COLOMBO  
Scrolling  
The Band Dbuttons are used in various modes and setting screens to scroll  
through data on the display. In most cases, holding down these buttons during a scroll  
operation scrolls at high speed.  
JAKARTA, PHNOM PENH, HANOI, VIENTIANE  
SINGAPORE, KUALA LUMPUR, BEIJING, TAIPEI, MANILA,  
PERTH, ULAANBAATAR  
HKG HONG KONG  
+08  
SEL  
TYO  
ADL  
SYD  
NOU  
SEOUL  
TOKYO  
ADELAIDE  
SYDNEY  
NOUMEA  
+09  
PYONGYANG  
Initial Screens  
+9.5  
+10  
+11  
+12  
DARWIN  
MELBOURNE, GUAM, RABAUL  
PORT VILA  
When you enter the World Time Mode, the data you were viewing when you last  
exited the mode appears first.  
WLG WELLINGTON  
CHRISTCHURCH, NADI, NAURU ISLAND  
*Based on data as of December 2002.  
Timekeeping  
00  
Resetting the seconds to  
while the current count is in the range of 30 to 59  
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are  
00  
reset to  
without changing the minutes.  
The year can be set in the range of 2000 to 2039.  
The watchs built-in full automatic calendar makes allowances for different month  
lengths and leap years. Once you set the date, there should be no reason to change  
it except after you have the watchs battery replaced.  
World Time  
The seconds count of the World Time is synchronized with the seconds count of the  
Timekeeping Mode.  
The current time in all World Time Mode cities is calculated in accordance with the  
Greenwich Mean Time (GMT) differential for each city, based on the current Home  
City time setting in the Timekeeping Mode.  
The GMT differential is the time difference of the time zone where the city is located  
from Greenwich Mean Time.  
GMT differential is calculated by this watch based on Universal Time Coordinated  
(UTC) data.  
Auto Time Display Precautions  
The watch may not display the current time if its face is  
more than 15 degrees above or below parallel. Make  
sure that the back of your hand is parallel to the ground.  
The watch returns to the Animation Mode in about three  
seconds, even if you keep the watch pointed towards  
your face.  
More than 15 degrees  
too high  
Static electricity or magnetic force can interfere with  
proper auto time display. If the watch does not display  
the current time automatically, try moving the watch  
back to the starting position (parallel with the ground)  
and then tilt it back toward you again. If this does not  
work, drop your arm all the way down so it hangs at  
your side, and then bring it back up again.  
Under certain conditions, the watch may not display the current time until about one  
second after you turn the face of the watch towards you. This does not necessarily  
indicate malfunction.  
You may notice a very faint clicking sound coming from the watch when it is shaken  
back and forth. This sound is caused by mechanical operation of auto time display,  
and does not indicate a problem with the watch.  
Backlight Precautions  
The backlight uses an EL (electro-luminescent) panel that causes the entire display to  
glow for easy reading in the dark.  
In any mode, press Lto illuminate the display for about two seconds.  
The electro-luminescent panel that provides illumination loses power after very long  
use.  
The illumination provided by the backlight may be hard to see when viewed under  
direct sunlight.  
The watch may emit an audible sound whenever the display is illuminated. This is  
due to vibration of the EL panel used for illumination, and does not indicate  
malfunction.  
The backlight automatically turns off whenever an alarm sounds.  
Frequent use of the backlight shortens the battery life.  
3
 

Blackberry Cell Phone 1031 User Manual
Blackberry Cell Phone SWDT266756 1153801 0818042737 005 User Manual
Bogen Stereo Amplifier TBA 15 User Manual
Braun Coffeemaker Tassimo User Manual
Brother All in One Printer 1820C User Manual
Califone CD Player 2385AV 02 User Manual
Canon Camera Accessories 3560B002 User Manual
Casio Cash Register 130CR User Manual
Chauvet Indoor Furnishings LED 360 User Manual
Cisco Systems IP Phone ol 8143 01 j User Manual