Casio Watch MA1108 EA User Manual

MA1106-EA  
Operation Guide 5160  
About This Manual  
Button operations are indicated using the letters shown  
in the illustration.  
All of the displays in this manual show black-on-white.  
For the sake of simplicity, the sample displays in this  
manual do not show the analog hands of the watch.  
E-1  
Procedure Lookup  
The following is a handy reference list of all the operational procedures contained in  
this manual.  
Contents  
General Guide ......................................................................................................... E-4  
Timekeeping Mode .................................................................................................. E-6  
About the Backlight .............................................................................................. E-11  
Stopwatch Mode ................................................................................................... E-16  
Recall Mode ........................................................................................................... E-22  
Alarm Mode ........................................................................................................... E-24  
Specifications ....................................................................................................... E-27  
To set the time and date ......................................................................................... E-8  
To set the hands ................................................................................................... E-10  
To switch the auto light switch function on and off .......................................... E-13  
To measure elapsed time ..................................................................................... E-18  
To record a lap time .............................................................................................. E-18  
To record a split time ............................................................................................ E-19  
To record multiple finishes .................................................................................. E-20  
To set the alarm time ............................................................................................ E-24  
To stop the alarm .................................................................................................. E-25  
To turn a daily Alarm and the Hourly Time Signal on and off ........................... E-26  
To test the alarm ................................................................................................... E-26  
E-2  
E-3  
General Guide  
Press B to change from mode to mode.  
If you do not perform any operation for a few minutes while a setting screen (with  
flashing digits) is on the display, the watch automatically exits the setting screen.  
Timekeeping Mode  
Alarm Mode  
Stopwatch Mode  
Recall Mode  
Press B.  
E-4  
E-5  
Timekeeping Mode  
Minute hand  
Hour hand  
Pressing C in the Timekeeping Mode illuminates the display for about two seconds.  
The backlight is disabled while a setting screen is on the display.  
When using 12-hour timekeeping, a P appears on the display for “pm” times (noon  
to 11:59 pm). An “am” time (midnight to 11:59 am) is indicated when there is no P  
indicator on the display. 24-hour timekeeping is being used when the 24 indicator is  
on the display.  
Month – Day  
Day of week  
Second hand  
PM indicator  
Hour  
Seconds  
Minutes  
E-6  
E-7  
To set the time and date  
DST indicator 2  
DST indicator 2  
1. While in the Timekeeping Mode, hold down A until the seconds digits flash on the  
display, indicating the setting screen.  
2. Press B to move the flashing in the sequence shown below.  
DST indicator 1  
DST indicator 1  
Seconds  
Day  
DST  
Hour  
Year  
Minutes  
12/24  
Month  
Press C.  
3. While the seconds setting is selected (flashing), press C to reset it to 00.  
If you press C while the seconds setting is in the range of 30 to 59, the seconds are  
reset to 00 and 1 is added to the minutes. If the seconds setting is in the range of 00  
to 29, the minutes count is unchanged.  
DST OFF  
DST ON  
DST indicator 1 flashes on the display only while the DST setting is selected on the  
setting screen. It shows 0 when DST is turned off, and 1 when DST is turned on.  
DST indicator 2 also flashes on the display while the DST setting is selected on the  
setting screen. In addition, it appears in the Timekeeping Mode and Alarm Mode  
while DST is turned on. DST indicator 1 is not displayed in these modes while DST  
is turned off.  
While the DST (Daylight Saving Time) setting is selected, press C to toggle it on  
and off.  
Daylight Saving Time (DST), which is also sometimes called “summer time”  
advances the time for one hour, as is the custom in some areas during the summer.  
Remember that not all countries or even local areas use Daylight Saving Time.  
E-8  
E-9  
 
Operation Guide 5160  
The first nine split times you record are stored in  
3. Press C as each runner finishes. The finish time and  
1/100 second  
Seconds  
Minutes  
1/100 second  
Seconds  
Minutes  
memory. The final time you record when you press A is  
also stored, for a total of 10 times.  
sequence number remains on the display for about  
seven seconds. Stopwatch timing continues internally.  
The first nine split times (finish time) you record are  
stored in memory. The final time you record when you  
press A is also stored, for a total of 10 times.  
If you continue to perform the split time operation after  
there are already nine times in memory, the split times  
are shown on the display but are not stored into memory.  
You can perform up to 99 split time operations (9 stored  
+ 90 unstored) during each elapsed time operation.  
You can recall split times using the Recall Mode.  
4. Press A to stop the time measurement.  
If you continue to perform the split time operation after  
there are already nine times in memory, the split times  
are shown on the display but are not stored into memory.  
You can perform up to 99 split time operations (9 stored  
+ 90 unstored) during each elapsed time operation.  
You can recall split times using the Recall Mode.  
4. Press A to stop the time measurement.  
5. Press C to clear the stopwatch to all zeros.  
To record multiple finishes  
1. In the Recall Mode, use A to select split time as the  
timing operation.  
See “Recall Mode” for more information about selecting  
the stopwatch operation.  
5. Press C to clear the stopwatch to all zeros.  
Split number  
SPL indicator  
Sequence number  
2. Enter the Stopwatch Mode, and then press A to start  
the stopwatch.  
E-20  
E-21  
1/100 second  
Recall Mode  
1/100 second  
Seconds  
Minutes  
Seconds  
Minutes  
Use the Recall Mode to recall the lap times and split times stored in memory.  
Press A to toggle the display between lap times and split times.  
Press C to scroll through Recall Mode records.  
Starting a new elapsed time operation in the Stopwatch Mode automatically clears the  
data (lap or split) that is currently displayed in the Recall Mode.  
Lap number  
Split number  
LAP indicator  
SPL indicator  
[SPLIT time display]  
[LAP time display]  
E-22  
E-23  
3. Press C to increase the selected digits. Holding down C changes them at high  
speed.  
4. After you make the settings you want, press A to exit the input screen.  
The format (12-hour and 24-hour) of the alarm time matches the format you select  
for normal timekeeping.  
When setting the alarm time using the 12-hour format, take care to set the time  
correctly as morning or afternoon.  
Alarm Mode  
When a Daily Alarm is turned on, the alarm sounds for  
Mode indicator  
Minutes  
about 20 seconds at the preset time each day. Press any  
button to stop the alarm after it starts to sound. When the  
Hour  
Hourly Time Signal is turned on, the watch beeps every  
hour on the hour.  
To set the alarm time  
To stop the alarm  
Press any button to stop the alarm after it starts to sound.  
1. Hold down A while in the Alarm Mode, until the hour  
digits starts to flash on the display, indicating the setting  
screen. The alarm is automatically turned on at this  
time.  
2. Press B to change the selection in the sequence  
shown below.  
Current time  
Daily Alarm indicator  
Hour  
Minutes  
Hourly Time Signal  
indicator  
E-24  
E-25  
To turn a daily Alarm and the Hourly Time Signal on and off  
Specifications  
Accuracy at normal temperature: 30 seconds a month  
3-hand: Hour, minute, second  
Press C while in the Alarm Mode to change the status of the Daily Alarm and Hourly  
Time Signal in the following sequence.  
Timekeeping Mode: Hour, minutes, seconds, am/pm(P), month, day, day of the week  
Time system: Switchable between 12-hour and 24-hour formats  
Calendar system: Full auto-calendar pre-programmed from 2000 to 2099  
Standard time/Daylight saving time  
Both OFF  
Daily Alarm  
Only  
Hourly Time  
Signal Only  
Both ON  
Stopwatch Mode  
To test the alarm  
Measuring unit:1/100 of a second (up to 59' 59" 99)  
1 second (from 1:00' 00")  
Hold down B in any mode (except when making any settings) to sound the alarm.  
Measuring capacity: 9 hours, 59 minutes, 59 seconds  
Functions: Elapsed time, lap time and split time  
Memory: 10 records (laps, splits)  
Note that this operation also changes the mode.  
Alarm Mode: Daily alarm, hourly time signal  
E-26  
E-27  
EL backlight: Automatic, manual  
Battery: One lithium battery (Type: CR2016)  
Battery life: 3 years under the following conditions  
2-second backlight operation per day  
20-second alarm operation per day  
E-28  
 

Beko Washer WMB81241LB User Manual
Black Box Server EME1DC16 User Manual
Blomberg Freezer DSM 9651 A+ User Manual
Blue Rhino Charcoal Grill CBT626A User Manual
Breville Blender BFP100 User Manual
Breville Coffeemaker BKC700XL User Manual
Brother Sewing Machine INNOVIS 500 User Manual
Canon All in One Printer 5291B019 User Manual
Canon Network Cables MG6120 User Manual
CAT Automobile Wheel Loader User Manual