Cateye Cyclometer OS 10 User Manual

 
1. Buttons  
MENU button  
RESTART button  
START/STOP  
button  
(ENTER)  
1Screen  
2
3
4
5
6
7
Battery life indicator  
REV  
FWD  
Selected tire icon  
Auto mode icon  
Speed scale icon  
Pacer  
MODE button (SELECT)  
See how the four buttons work in the various modes.  
Selected function icon  
START/STOP button (ENTER)  
Normally this button starts and stops timer that effects the other functions like average speed,  
etc. When measuring, the speed scale icon flashes.  
While setting up the unit this button enters and completes each selection.  
MODE button (SELECT: FWD/REV)  
Normally this button switches the function of the lower display. In the setting mode this  
button forwards and reverses among options. The right button is FWD (forward) and the left  
button is REV (reverse).  
MENU button  
This button is used to review past data or to change settings.  
RESTART button  
This button is used only after replacing the battery or when screen freezes or appears erratic.  
Reset operation (Resetting the screen data)  
Press START/STOP/ENTER button and either of MODE/SELECT but-  
Press simultaneously  
ton simultaneously to reset daily ride data of Trip Distance, Average  
Speed and Elapsed Time. Total Distance (Odo) and Clock Time are  
not effected.  
 
OS 1.0  
3
2. Functions  
Current Speed  
Current Speed always displays in the upper display. The data is updated  
once a second. When the font size is 100%, Current Speed appears be-  
tween Clock Time and Elapsed Time and is indicated by the flashing Spd  
icon. 0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h]  
Elapsed Time  
This is the ride time from the start to the present and shown in hours, min-  
utes and seconds. Performing a reset operation returns the data to zero.  
After 9.59.59 the timer will continue counting from 0.00.00. 0.00.00 - 9.59.59  
Trip Distance  
The trip distance from the start to the present time is displayed. Performing  
a reset operation returns the data to zero. 0.00 - 99999.99 mile [km]  
Average Speed  
The average speed from the start to the present time is displayed. Performing  
a reset operation returns the data to zero. When the trip distance exceeds  
99999.99km or the elapsed time exceeds 99:59'59", [ERROR] will appear on  
the display and calculation of Average Speed will no longer compute.  
0.0 - 65.9 mph [0.0 - 105.9 km/h]  
Maximum Speed  
The maximum instantaneous speed from the start to the present time is dis-  
played. Performing a reset operation returns the data to zero. Maximum  
speed is calculated regardless if the ride timer is on.  
0.0(3.0)-65.9 mph [0.0(4.0)-105.9 km/h]  
Total Distance  
The odometer distance is accumulated continuously. It is not effected by  
performing a reset operation. Odometer distance is calculated regardless if  
the ride timer is on. 0.0 - 999999.9 mile [km]  
Clock Time  
Time is displayed in 12h or 24h mode.  
* The font size of the sample screens in this page is 70:30.  
 
OS 1.0  
4
Pace arrow  
The pace arrow indicates if the current speed is faster or slower than the  
average speed. If the current speed is equal to the average speed, both  
arrows appear.  
Eco mode (Sleep mode)  
When the main unit is left without receiving any signal for about five min-  
utes, the display goes blank. When any main button is pressed, or the  
wheel starts again, the screen wakes up and returns to normal display.  
Auto mode  
When Auto Mode is on, the unit automatically starts/stops measuring func-  
tions related to the timer when the wheel is spinning.  
the default state, Auto Mode is off.  
Battery life indicator  
icon comes on. In  
If this indicator appears, the battery is beginning to run down. When the  
indicator first appears, the battery will last for about one month. When the  
indicator begins flashing there are about 10 days remaining. Replace the  
battery at this time.  
Note: Depending on the environment, the battery life indicator might ap-  
pear earlier than expected. Use the indicator as a rough standard.  
If the display does not become darker even after adjusting the dis-  
play contrast, it is time to replace the battery.  
Replacing battery  
Battery life: approximately 1 year (if used for 1 hour a day)  
Close  
In the Menu Screen, battery runs down faster than the normal  
measuring screen.  
After replacing the battery, press RESTART button on the back  
Open  
RESTART  
CR2032  
of the main unit (refer to page 6.)  
Caution! The RESTART operation will erase Elapsed Time,  
Trip Distance, Average Speed, Maximum Speed  
and Clock Time. Set Clock Time correctly after re-  
 
placing the battery.  
OS 1.0  
5
3. Restart/Format/Setup  
Restart operation (1.When erratic data appears; 2.After replacing battery)  
After replacing the battery, the electric current can be unstable which might  
effect the operation of the OS1.0.To avoid this you must press the RESTART  
button after replacing the battery.  
Note: After restart operation, Elapsed Time, Trip Distance, Average Speed,  
Maximum Speed and Clock Time is erased. Set Clock Time again.  
Format operation (1.Before first use; 2.When erasing all the stored data)  
Caution: Take note that all the data is erased by this operation.  
If you want to stop format operation, select "NO" and  
the unit returns to measuring screen.  
This operation erases all the data and settings.  
1. Hold down both MODE/SELECT buttons simultaneously, press and  
release RESTART button. The message "FORMAT?" appears.  
2. Select "YES" and press ENTER/START/STOP button.  
Once format operation is done, the unit need to be set up from the  
first step.  
Setup  
Setup process  
Speed scale setting  
Tire size setting  
Date setting  
In addition to Quick Setup that is writ-  
ten in the Setup guide, there is Custom  
Setup (see the next page). In the Cus-  
tom Setup, you can select only your fa-  
vorite functions that you want to use,  
and you can also choose your preferred  
font size and input your personal data.  
Note: By pressing the two SELECT/  
MODE buttons simultaneously  
you can go back to the next pre-  
vious screen.  
Time scale setting  
Clock time setting  
Function customizing  
Font size setting  
Personal data input  
Setup finished  
Custom setup entrance  
NO  
YES  
Setup finished  
Goes to previous screen  
QUICK SETUP  
CUSTOM SETUP  
 
OS 1.0  
6
Custom setup  
To personalize your Cat Eye OS1.0, select YES in e Custom setup prompt.  
Function customizing  
You can choose to display just the functions you would like. Press EN-  
TER/START/STOP button to select each function you would like to dis-  
play.You can also simply SELECT ALL to display all seven cyclocomputer  
functions. you can choose any of the following 6 functions (current speed  
is always displayed): Elapsed Time, Trip Distance, Average Speed, Maxi-  
mum Speed, Total Distance and Clock. To complete function custom-  
ization navigate to "FINISHED" and press ENTER/START/STOP button.  
(Refer to page12.)  
Font size  
Choose a display percentage font size.  
70:30(%)  
50:50(%)  
30:70(%)  
100(%)  
Personal data input  
Input your birth-  
day by month  
and day (mm/  
dd).  
Input your name. Up  
to 16 letters can be  
input. (Refer to page  
12.)  
Setup finished  
You can change the settings later in the MENU screen. Refer to  
pages 8-12.  
Setup finished  
 
OS 1.0  
7
4. Menu Screen  
When MENU button is pressed, the screen changes from measuring screens to menu  
screens.  
Measuring screen  
Menu screens are divided into two categories:  
"Data Review" reviews the previous recorded data;  
"Function Setting" allows you to change various settings.  
Note: In the Menu Screen, battery runs down faster than the normal  
measuring screen.  
MENU  
Data review  
Refer to page 9  
Maximum  
speed  
Last ride  
day data  
Yearly  
distance  
ever  
recorded  
Counter-  
clockwise  
REV  
FWD  
Clockwise  
(
SELECT  
)
(
SELECT  
)
ENTER  
(
START  
/
STOP)  
Weekly  
distance  
Monthly  
distance  
FWD  
(
SELECT)  
REV  
Function  
customiz-  
ing  
Display  
contrast  
setting  
(
SELECT  
) Function setting  
Date  
setting  
Personal  
distance  
Refer to  
page 10-12  
Mode  
navigation  
on/off  
REV  
FWD  
Tire size  
setting  
(
SELECT  
Counterclockwise  
)
(SELECT)  
Clockwise  
ENTER  
(
START  
/
STOP)  
Auto  
mode  
on/off  
Clock  
time  
setting  
Font  
size  
setting  
Personal  
data  
input  
 
OS 1.0  
8
Data review  
Checks and reviews the accumulated data of the past. Press MENU button again to return  
to measuring screen.  
Last ride day data  
ENTER  
Shows all the data measured in the last ride day (0:00 -  
23:59 or midnight to midnight).When the clock passes mid-  
night, the day's data is memorized as the "last ride day data".  
(
START  
/
STOP  
)
SELECT  
(MODE)  
Maximum speed ever recorded  
The maximum speed ever recorded in the past is displayed  
together with the recorded date.  
ENTER  
(
START  
/
STOP)  
SELECT  
Yearly distance  
The yearly distance is displayed for the past  
six years.  
(MODE)  
ENTER  
ENTER  
Press ENTER/START/STOP button and the  
screen shows the data in the graph format.  
(Maximum value of the graph: 12000km)  
(
START  
/
STOP  
)
(
START  
/
STOP)  
SELECT  
(MODE)  
Monthly distance  
The monthly distance is displayed for one  
year. Press ENTER/START/STOP button  
and the screen shows the data in the graph  
format by six months period.  
ENTER  
ENTER  
(
START  
/
STOP  
)
(START  
/
STOP)  
(Maximum value of the graph: 1200km)  
SELECT  
(MODE)  
Weekly distance  
A week's trip distance is displayed day by day.  
Press ENTER/START/STOP button and the  
screen shows the data in the graph format.  
(Maximum value of the graph: 120km)  
ENTER  
ENTER  
(
START  
/
STOP  
)
(
START  
/
STOP)  
Caution! If clock time setting is changed during use, incorrect data may accumulate.  
 
OS 1.0  
9
Menu Screen (continued)  
Function setting  
The function setting screens allow you to change various programmed  
functions. At any time press MENU button to return to normal mea-  
suring screens.  
Note: By pressing the two SELECT/MODE but-  
tons simultaneously you can go back to  
Goes to previous screen  
the previous on screen.  
Auto mode  
When Auto mode is on, the unit automatically starts/stops mea-  
suring, whenever the computer receives a signal.  
on when it is activated.  
icon will be  
Clock time setting  
Changes the clock time setting. When you  
have selected 12h mode, take note of the  
AM/PM icon.  
Font size setting  
Select your preferred font size from the four combina-  
tions.  
Note: When digits exceed the screen size the figures  
are automatically reduced. In the default figure it is  
70:30.  
Personal data input  
You can input your name and birthday. Up to 16 letters  
can be input for the name. (Refer to page 12.)  
 
OS 1.0  
10  
Tire size setting  
Inputs two different tire sizes A and B.  
To input it by inch scale, choose EASY. For more ac-  
curate measurement, choose CUSTOM and input it  
in millimeters, by measuring the exact wheel circum-  
ference.  
Date setting  
Changes the date setting. It is important to input the  
correct date as it affects the accumulated data.  
Function customizing  
Selects only your favorite functions that you  
want to use (refer to page 12).  
Display contrast setting  
Adjusts the contrast of the screen (right: darker, left: lighter).  
Note: The darker the display, the higher the battery consumption.  
Personal distance  
You can input accumulated distance from a different  
cyclocomputer. Then the total distance starts mea-  
suring from that figure (refer to page 12).  
Mode navigation on/off  
Shows what is the previous/next function when  
MODE button is pressed to navigate to a new func-  
tion. In the default setup, mode navigation is on.  
 
OS 1.0  
11  
Menu Screen (continued)  
How to change setting  
Tire size setting  
A or B - Chooses your bike, A or B.  
Press SELECT/MODE button to select A or B.  
Press ENTER/START/STOP to decide.  
SIZE --- Changes the figure of the tire sizes A and B.  
EASYsetting:  
inputs the figure by the inch size 14  
inch - 27 inch;  
CUSTOMsetting: inputs the figure by millimeters 10 -  
9999mm  
Function customizing Select your favorite functions with SELECT/MODE button. Press  
SELECT/MODE button again to clear the selection. If you dont  
select anything,Total Distance is automatically selected.  
If you want to select all the functions, choose "SELECT ALL". To  
complete the function customizing, navigate to "FINISHED" and  
press ENTER/START/STOP button.  
Personal distance  
You can keep on accumulating the total distance continuously from your pre-  
vious cyclocomputer. Up to six digits can be input.  
Input the figure for the first digit using SELECT/MODE button.  
Press ENTER/START/STOP button and the digit moves to the next digit.  
When you reach the last digit (sixth digit), press ENTER/START/STOP but-  
ton, and personal distance input is completed.  
Personal data  
Input your name first.  
Navigate the alphabet by pressing SELECT/MODE button. Characters A-Z,  
a-z, 0-9, including punctuation marks, a space and  
Press ENTER/START/STOP button to select a specific character. Then it  
moves to the next letter.  
When you have completed selecting all the digits you want, navigate to the  
character and press ENTER/START/STOP button. The birthday input  
screen now appears.  
.
 
Input your birthday month and day (mm/dd).  
OS 1.0  
12  
5. Troubleshooting  
If a malfunction occurs, check the following items before contacting a dealer for service.  
Trouble  
Check items  
Remedy  
The liquid crystal screen appears dark or there are some dark spots.  
Was it left for a long time under direct sunlight?  
It will go back to normal after a few hours once it is out of the sunlight. Data will not be  
effected.  
Display response is slow.  
Was the ambient temperature too low [below 0C (32F)]?  
It will go back to normal when the temperature rises. Data will not be effected.  
No display appears.  
Is the battery in the main unit worn out?  
Replace it with a new one (CR2032). After the battery is replaced, be sure to press RESTART  
button.  
Meaningless display appears.  
Press RESTART button.  
Current Speed is not working properly.  
Check if there is any object on the contacts of the main unit or the bracket.  
Clean the contacts. Main unit is often stained with sweat. Periodically wash it with mild soap  
and wipe dry.  
Check the clearance between the speed sensor and the magnet.  
Check if the mark line of the speed sensor and the magnet is aligned.  
Adjust the positions.  
Check if the wire is broken or damaged.  
Replace the bracket sensor set with a new one.  
Measurement does not stop even though START/STOP button is pressed.  
Is the Auto Mode on?  
When the Auto Mode is on, START/STOP button does not start or stop measurement. Turn  
the Auto Mode off. (Refer to "Auto mode" in page 11.)  
The size of the figures on the screen is reduced.  
When the bigger font size is selected (100%, 70%, 50%), and if the number of digits for trip  
distance and total distance exceed the maximum number of digits, the size is automatically  
reduced to fit on the screen.  
The last ride day data is not correct.  
Is the clock time setting correct?  
The last ride day data is saved when the clock time passes the midnight. Therefore, if your  
clock is not correctly set, the data shown will be incorrect.  
Is the unit measuring?  
The last ride day data is not updated unless it newly measures data. (See page 9.)  
 
OS 1.0  
13  
6. Specifications  
CAT EYE OS1.0  
Display functions  
Current Speed  
Elapsed Time  
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]  
0:0000- 9:5959”  
Trip Distance  
0.00 - 99999.99 mile [km]  
Average Speed  
Maximum Speed  
Total Distance  
Clock Time  
0.0 - 65.9 mph [0.0 - 105.9 km/h]  
0.0(3.0) - 65.9 mph [0.0(4.0) - 105.9 km/h]  
0.0 - 999999.9 mile [km]  
0:00 - 23:59 [AM12:00 - PM11:59]  
Indicates if the current speed is higher or lower than the average speed.  
Pace Arrow  
Data review function  
Last Ride Day Data  
All the data measured in the last ride day (0:00 - 23:59)  
Maximum speed ever recorded The maximum speed ever recorded in the past  
Yearly distance  
Monthly distance  
Weekly distance  
The yearly distance for the past six years  
The monthly distance for one year  
A week's trip distance, day by day  
Setting function  
Tire size:  
Two different tires A and B (default figure: A=2096, B=2050)  
EASY: 14 inch - 27/700, CUSTOM: 10 - 9999mm  
January 1, 2000 - December 31, 2099  
Selects only the preferred functions  
Changes the contrast in eight levels  
Inputs personal total distance and continues to accumulate from  
that figure (maximum figure: 6 digits)  
Date  
Function customizing  
Display contrast  
Personal distance  
Mode navigation  
Personal data  
Font size  
Shows the previous/next function  
Name and birthday (maximum letters for name: 16 letters)  
Chooses the font size of the lower display (4 sizes)  
in 12h-mode or 24h-mode  
Clock time  
Control system  
Display system  
8-bit one-chip microcomputer, crystal oscillator  
Liquid crystal display (54x31dot plus icon)  
Noncontact magnetic sensor  
Speed signal detection system  
Operating temperature range  
Storage temperature range  
Applicable fork diameter  
Power supply / battery life  
Dimension / weight  
32°F - 104°F [0°C - 40°C]  
4°F - 122°F [20°C - 50°C]  
11ø - 36ø  
CR2032 x 1 / approx. 1 year (When using 1 hour/day)  
2-7/18x 1-27/32x 23/32[62 x 47 x 18 mm] / 1.34 oz [38 g]  
DDoewsingnlsoaandd sfpreocmificaWtionwsware.Ssuobmjecat tnouchaalnsg.ecwoitmho.utAnollticMe,aduneutoamlsodSifiecaatiorcnshorAimnpdrovDemoewntns.load.  
OS 1.0  
14  
Optional parts  
1 Bracket sensor kit [169-9650]  
2 Bracket sensor kit (Long) [169-9651]  
3 Speed sensor kit [169-9670]  
4 Speed sensor kit (Long) [169-9671]  
5 Bracket [169-9660]  
34  
6 Magnet [169-9690]  
7 Screw set [169-9680]  
8 Lithium battery [166-5150]  
12  
7
6
5
8
Limited Warranty  
1-Year Warranty for Main Unit Only (Accessories/Attachments and Battery Consumption excluded)  
If the computer main unit is operating defectively from normal use, the part of the main unit will be repaired or  
replaced free of charge. The service must be performed by Cat Eye Co., Ltd. Please consult our trouble-  
shooting page and then a retailer before returning the product to Cat Eye. Pack the main unit carefully with a  
detailed explanation of the problem and instruction for repair. Please include your name and address clearly  
on your correspondence. Insurance, handling and transportation charges to our service shall be borne by  
person desiring service.  
CO.,LTD.  
2-8-25 Kuwazu Higashi Sumiyoshi-ku, Osaka 546-0041 Japan  
Service & Research Address for United States Consumers:  
CAT EYE Service & Research Center  
1705 14 th St. 115 Boulder CO 80302  
Phone: 303-443-4595  
FAX: 303-473-0006  
Toll Free: 800-5CAT EYE  
 
OS 1.0  
15  
REGISTRATION  
CAT EYE Web Site (http://www.cateye.com)  
For warranty service you must register your product. Please register your OS1.0 as soon as possible.  
CAT EYE provides as much technical support as possible by telephone, e-mail and our web site.  
Please register on-line through our web site, or send the registration card below directly to our  
Customer Service Department. For registration, please fill in the product's serial number (the 7-  
digits number marked on the back of the main unit).  
CO.,LTD.  
2-8-25 Kuwazu Higashi Sumiyoshi-ku, Osaka 546-0041 Japan  
Service & Research Address for United States Consumers:  
CAT EYE Service & Research Center  
1705 14 th St. 115 Boulder CO 80302  
Phone: 303-443-4595  
FAX: 303-473-0006  
Toll Free: 800-5CAT EYE URL: http://www.cateye.com  
Serial number  
Copyright© 2000  
CAT EYE Co., Ltd.  
OS1UE-001124 2  
Printed in Japan  
066600051  
E
CAT EYE OS1.0  
U.S. Pat. Nos. 4642606/5904442/Pat. and Design Pat. Pending  
REGISTRATION CARD  
®
Model:  
Serial No.  
Name:  
Please fill with 7-digits numbers marked on the back of main unit.  
Age:  
Street:  
City:  
State/Providence:  
Postal/ZIp code:  
Country:  
E-mail address: (*We will never share your e-mail address with any other company.)  
Dealer or Shop name:  
Dealer or Shop address:  
The date of purchase:  
/
/
DCoowmnmloenatsd: from Www.Somanuals.com. All Manuals Search And Download.  

Billion Electric Company Personal Computer USBTAQG User Manual
Billy Goat Vacuum Cleaner KD 410 User Manual
Black Decker Coffeemaker GT305 User Manual
Black Decker Work Light VEC157BD User Manual
Bogen Music Mixer DMP 06 User Manual
Britax Stroller stoller User Manual
Casio Watch WS2201AV User Manual
Chauvet Indoor Furnishings PC 08 User Manual
Chicago Electric Welding System 36983 User Manual
Chicago Electric Work Light 66433 User Manual