Chicago Electric Saw 69325 User Manual

Owner’s Manual & Safety Instructions  
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,  
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual  
near the assembly diagram (or month and year of purchase if product has no number).  
Keep this manual and the receipt in a safe and dry place for future reference.  
ITEM 69325  
FOLDING  
TILE SAW STAND  
WITH WHEELS  
Tile Saw and blade sold separately.  
Email our technical support at: [email protected]  
When unpacking, make sure that the product is intact  
and undamaged. If any parts are missing or broken,  
please call 1-800-444-3353 as soon as possible.  
©
®
Copyright 2011 by Harbor Freight Tools . All rights reserved.  
No portion of this manual or any artwork contained herein may be reproduced in  
any shape or form without the express written consent of Harbor Freight Tools.  
Diagrams within this manual may not be drawn proportionally. Due to continuing  
improvements, actual product may differ slightly from the product  
Read this material before using this product.  
Failure to do so can result in serious injury.  
SAVE THIS MANUAL.  
described herein. Tools required for assembly and service may not be included.  
 
Assembly Instructions  
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the  
beginning of this document including all text under subheadings therein  
before set up or use of this product.  
Note: Tile Saw sold separately.  
Water Tray  
1. Pull the Tile Saw’s Table to the front of  
the Frame. From under the right side of  
the Table, align the hole in the rail with  
the pin in the Table Lock Lever. Push  
the pin into the rail, locking the Table.  
Frame  
2. Align the holes on the Tile Saw’s  
Water Tray Frame with the  
holes on the Stand.  
Washer  
3. Insert Short Bolts through Washers  
and into holes. Tighten securely.  
Stand  
Part  
Short Bolt  
Parts List and Diagram  
Part  
Description  
Size Qty  
M8×55  
Description  
Size Qty  
1a Hex Bolt  
2
2
2
1
2
4
7a Locknut  
M8  
2
1
2
2
2
2
2a Insert C  
8a Rear Support Leg Asm.  
9a Flat Washer  
10a Wheel  
11a Flat Washer  
12a Locknut  
3a Bolt  
M8×20  
12  
4a Front Support Leg Asm.  
5a Foot  
10  
6a Flat Washer  
8
M10  
6a  
1a  
2a  
3a  
7a  
3a  
2a  
1a  
8a  
6a  
4a  
5a  
9a 10a 11a 12a  
Item 69325  
For technical questions, please call 1-800-444-3353.  
 
Page 3  
Record Serial Number Here:  
Note: If product has no serial number, record month and year of purchase instead.  
Note: Some parts are listed and shown for illustration purposes only,  
and are not available individually as replacement parts.  
PLEASE READ THE FOLLOWING CAREFULLY  
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY  
DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER  
OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE  
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR  
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE  
MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS  
REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,  
AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF  
HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,  
OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.  
Limited 90 Day Warranty  
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality  
and durability standards, and warrants to the original purchaser that this product is free from  
defects in materials and workmanship for the period of 90 days from the date of purchase.  
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence  
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,  
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,  
injuries to persons or property, or for incidental, contingent, special or consequential damages  
arising from the use of our product. Some states do not allow the exclusion or limitation of  
incidental or consequential damages, so the above limitation of exclusion may not apply to you.  
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR  
IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.  
To take advantage of this warranty, the product or part must be returned to us with transportation  
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany  
the merchandise. If our inspection verifies the defect, we will either repair or replace  
the product at our election or we may elect to refund the purchase price if we cannot readily  
and quickly provide you with a replacement. We will return repaired products at our expense,  
but if we determine there is no defect, or that the defect resulted from causes not within  
the scope of our warranty, then you must bear the cost of returning the product.  
This warranty gives you specific legal rights and you may also  
have other rights which vary from state to state.  
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353  
 

Bernard Welder SPEC JL 13 User Manual
Black Box Switch LE2425A User Manual
Black Decker Sander 6127 67 User Manual
Blanco Indoor Furnishings 501 306 User Manual
Blue Rhino Gas Grill GBC621CR C User Manual
Bogen Speaker OPS1 User Manual
Bosch Power Tools Trimmer PS70 2A User Manual
Brother Fax Machine Fax 1360 User Manual
Casablanca Fan Company Outdoor Ceiling Fan C16G73T User Manual
Chief Manufacturing Indoor Furnishings MSM User Manual