I N S T A L L A T I O N I N S T R U C T I O N S
Universal Wall Mounting Bracket
OFBU
Installation Instructions
OFBU
Tighten Fastener
Adjust
Apretar elemento de fijación
Befestigungsteil festziehen
Apertar fixador
Ajustar
Einstellen
Ajustar
Serrare il fissaggio
Regolare
Afstellen
Ajuster
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Remove
Quitar
Aflojar elemento de fijación
Befestigungsteil lösen
Desapertar fixador
Entfernen
Remover
Rimuovere
Verwijderen
Retirez
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
Hex-Head Wrench
Llave de cabeza hexagonal
Sechskantschlüssel
Chave de cabeça sextavada
Chiave esagonale
Zeskantsleutel
Clé à tête hexagonale
REQUIRED TOOLS AND INCLUDED PARTS
9/16"
1/8"
(Provided)
A (1)
B (1)
1/8"
3
OFBU
Installation Instructions
INSTALLATION
A
x4
WARNING: FAILURE TO PROVIDE ADEQUATE
STRUCTURAL STRENGTH FOR THIS COMPONENT CAN
RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE
TO EQUIPMENT! It is the installer’s responsibility to make
sure the structure to which this component is attached can
support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
5
1. Verify mounting brackets on wall bracket (A) can move
freely. (See Figure 1)
5
A
1
x4
Figure 3
IMPORTANT ! : If the display being installed has a recessed
mounting surface, the display must be assembled to the mount
prior to mount installation. See Display Installation in the
installation instructions included with the mount being installed.
6. Install mount to OFBU following the instructions outlined in
the installation instructions provided with the mount being
installed.
Figure 1
2. Locate desired installation location and slide upper
mounting plate into wall making sure bracket is seated in
channel bottom. (See Figure 2)
3. Let lower mounting plate rest against wall.
4. Using 1/2" socket, tighten tension screw until lower
mounting plate slides into channel in wall and continue
tightening until resistance is felt. (See Figure 2)
2
4
A
A
4
3
Figure 2
5. Tighten two upper and lower button head cap screws to
secure wall bracket (A) to wall. (See Figure 3)
4
Installation Instructions
OFBU
5
OFBU
Installation Instructions
6
Installation Instructions
OFBU
7
OFBU
Installation Instructions
USA/International
Europe
A
P
F
A
P
F
8401 Eagle Creek Parkway, Savage, MN 55378
800.582.6480 / 952.894.6280
877.894.6918 / 952.894.6918
Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands
+31 (0)40 2668620
+31 (0)40 2668615
Asia Pacific
A
Room 30I, Block D, Lily YinDu International Building
LuoGang, BuJi Town, Shenzhen, CHINA. Post Code: 518112
8812-000041
©2007 Chief Manufacturing
08/07
P
F
+86-755-8996 9226 ; 8996 9236 ; 8996 9220
+86-755-8996 9217
|