Bissell Vacuum Cleaner 1716 User Manual

Spot Lifter®  
POWERBRUSH  
H A N D H E L D D E E P C L E A N E R  
U S E R ’ S G U I D E  
1716 SERIES  
3
4
5
Safety Instructions  
Product View  
Product Features  
6-7  
8-9  
Operations  
Maintenance and care  
9-10  
Troubleshooting  
Consumer Services  
Replacement Parts  
Warranty  
10  
11  
12  
 
IMPORTANT SAFETY INSTRUCTIONS  
When using an electrical appliance, basic  
precautions should be observed, including  
the following:  
Always connect to a properly grounded outlet; see  
grounding instructions.  
Do not modify the 3-prong grounded plug.  
Read all instructions before using your  
Spot Lifter® Powerbrush  
SAVE THESE  
WARNING - To  
reduce the risk of fire,  
electric shock, or injury:  
INSTRUCTIONS  
GROUNDING  
Do not use for any purpose other than described in  
this User’s Guide.  
INSTRUCTIONS  
Use only BISSELL cleaning products intended for  
This appliance must be connected to a grounded wir-  
ing system. If it should malfunction or break down,  
grounding provides a safe path of least resistance  
for electrical current, reducing the risk of electrical  
shock. The cord for this appliance has an equip-  
ment-grounding conductor and a grounding plug. It  
must only be plugged into an outlet that is properly  
installed and grounded in accordance with all local  
codes and ordinances.  
use in this appliance.  
Use only manufacturer’s recommended  
attachments.  
Do not expose to rain, store indoors.  
Do not handle plug or appliance with wet hands.  
Do not leave Spot Lifter® PowerBrush when it is  
plugged in.  
Do not put any object into appliance openings or use  
with blocked openings. Keep free of dust, lint, hair, and  
anything that may reduce air flow.  
Grounded  
Outlets  
Do not expose hair, loose clothing, fingers or body  
parts to openings or moving parts.  
Be extra careful when cleaning stairs.  
Grounding Pin  
Do not allow to be used as a toy. Close attention is  
necessary when used by or near children.  
Do not pick up hot or burning objects.  
WARNING:  
Improper  
Do not pick up flammable or combustible materials (lighter  
fluid, gasoline, kerosene, etc.) or use in the presence of  
explosive liquids or vapor.  
connection of the equipment-grounding  
conductor can result in a risk of electrical  
shock. Check with a qualified electrician  
or service person if you aren’t sure if the  
outlet is properly grounded. DO NOT MODIFY  
THE PLUG. If it will not fit the outlet, have  
a proper outlet installed by a qualified  
electrician. This appliance is designed for  
use on a nominal 120-volt circuit, and has  
a grounding attachment plug that looks like  
the plug in the drawing above. Make certain  
that the appliance is connected to an outlet  
having the same configuration as the plug.  
No plug adapter should be used with this  
appliance.  
Do not pick up toxic material (chlorine bleach,  
ammonia, drain cleaner, gasoline, etc.).  
Do not use appliance in an enclosed space filled with  
vapors given off by oil base paint, paint thinner, some  
moth proofing substances, flammable dust,or other  
explosive or toxic vapors.  
Do not pull or carry by cord, use cord as a handle,  
close door on cord, pull cord around sharp corners  
or edges, run appliance over cord, or expose cord  
to heated surfaces.  
Do not use with damaged cord or plug.  
Do not immerse. Use only on surface moistened by  
cleaning process.  
Do not use Spot Lifter® PowerBrush if it has been  
dropped, damaged, left outdoors or dropped into water.  
Have it repaired at an Authorized Service Center.  
This model is for household use only.  
Turn off all controls before unplugging.  
Unplug from outlet when not in use and before  
conducting maintenance and troubleshooting.  
Unplug by grasping the plug, not the cord. Do not  
unplug by pulling on cord.  
3
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
 
Product view  
Solution Tank  
Solution Tank  
Release Tabs  
Power Switch  
Spray Trigger  
Power Cord  
Removable Brush  
Cartridge with Dual  
PowerBrushes  
Collection Tank  
Belt Cover Door  
Circuit Interrupting  
Device (C.I.D.)  
Spray Nozzle  
CAUTION:  
Only use one of BISSELL's  
advanced formulas for portable deep cleaning  
machines in your cleaner. Use of cleaning formulas  
which contain lemon or pine oil may damage this  
appliance and void warranty. Do not use chemical  
spot cleaners or solvent-based soil removers. These  
products may react with the plastic materials used in  
your cleaner, causing cracking or pitting.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
4
 
Product features  
Solution tank. Holds 2X Little Green® formula  
and water.  
Collection tank. Collects dirty water and solution.  
You will need to remove the solution tank  
before you can remove the collection tank.  
Spray trigger. Dispenses water  
and solution.  
Solution tank release tabs. Gently press in to  
remove the clean/solution Tank.  
Circuit Interrupting Device (C.I.D.).  
Because you will be using this product in  
wet environments, such as bathrooms, we  
have equipped this unit with this added  
safety feature. The C.I.D. shuts off the  
product in potentially hazardous situations.  
The C.I.D. has test (white) and reset (red)  
buttons which should be operated each time  
the product is plugged in.  
Removable brush cartridge with dual  
PowerBrushes. Double the cleaning action  
to lift and remove stains and dirt. Removable  
for easy cleaning.  
WARNING:  
Do not use an extension cord with this  
product. The use of an extension cord may  
result in a severe electrical shock, particularly  
if the extension cord does not have an  
electrical rating higher than that of the  
product, OR if the extension cord does not  
have a three-prong grounding plug and if  
the extension cord is not plugged into a  
circuit box with a ground fault circuit inter-  
rupter. Safety precautions such as keeping all  
connections off the ground and dry will not  
eliminate the danger.  
5
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
 
Operations  
Filling the solution tank  
1. Remove the solution tank by gently pressing  
the quick release tabs on the solution tank  
and sliding the tank off of the unit.  
1.  
2. Open the tank by unscrewing and remov-  
ing the cap. Add water and formula* to the  
indicated fill lines on the solution tank.  
*NOTE: Your Spot Lifter PowerBrush  
includes an 8 oz. trial size formula.  
2.  
3. Replace the cap before placing the tank  
back on the unit.  
Pre-treating  
To aid in the removal of tough, stubborn stains,  
pre-treating the stain may be necessary.  
1. Hold the unit above the area to be cleaned.  
Using the manual trigger spray, apply a sufficient  
amount of water and solution to the stain.  
2. Wait 3-5 minutes before cleaning.  
Cleaning  
1. Plug in the unit.  
2. While holding the Spot Lifter PowerBrush above  
the area to be cleaned, apply water and formula  
by pressing the manual trigger spray,  
2.  
dispensing fluid to the soiled/stained area.  
3. Turn the power switch to the “ON” position. ( I )  
4. Brushing and suction can be done separately,  
based on how you hold and use the unit.  
3.  
To Use The Dual PowerBrushes Only:  
Tilt the unit forward slightly, placing both brushes  
in contact with the carpet.The flat surface of the  
brush cartridge should be parallel to the surface  
being cleaned.  
For Suction Only:  
Tilt the unit forward, pressing the front of the  
Spot Lifter Powerbrush firmly against the sur-  
face area to be cleaned, lifting the brushes up  
off the surface. Pull toward you to remove the  
soil and cleaning solution.  
Note: Step #4 may be repeated until no  
more dirty water is removed or until the  
area to be cleaned meets your satisfaction.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
6
 
Operations  
Cleaning (continued)  
5. Check the collection tank and empty the tank  
if it is full (See To empty the collection tank,  
page 8).  
Tip:  
You may also spray water  
and formula, with the  
manual trigger spray, while  
the unit is turned on and  
you are using the dual  
PowerBrushes then suction  
to clean.  
6. If the Spot Lifter PowerBrush stops  
spraying, turn off the unit and check the  
cleaning solution level in the solution tank.  
Refill if needed. Never run the unit without  
water or cleaning solution.  
Spot cleaning upholstery  
1. Check manufacturer’s tag before cleaning.  
“W” or “WS” on the tag means you can use  
your Spot Lifter PowerBrush. If tag is coded  
with an “S” (with diagonal strike-through) or  
states “Dry Clean Only”, do not proceed.  
Tip:  
When cleaning a vertical  
surface (ie: chair back, auto  
interior, etc.) begin with a  
completely empty collection  
tank.  
2. If manufacturer’s tag is missing or not  
coded, check with your furniture dealer.  
3. If possible, check upholstery stuffing.  
Colored stuffing may bleed through fabric  
when wet.  
7
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
 
Maintenance and care  
Machine care  
1. Turn the power switch to the “OFF”  
position. ( O )  
2. Unplug the unit.  
1.  
3. Carry the Spot Lifter PowerBrush to the sink  
or drain.  
To empty the collection tank  
1. Begin by removing the solution tank. Gently  
press the quick release tabs on the solution  
tank and slide the tank off of the unit.  
2.  
3.  
2. Grasp the collection tank and pull to  
remove.  
3. While at the sink, remove the tank cap by  
unscrewing and lifting out.  
4. Empty the tank. Rinse the collection tank  
with warm water.  
5. Replace cap by turning to the right, until snug.  
6. Slide the collection tank into the unit.  
Replace the solution tank.  
Note: If a significant amount of water and  
formula remains in the solution tank, you  
may leave it in the solution tank for your  
next cleaning task.  
To clean the dual powerbrush  
1.  
2.  
NOTE: Make sure the Power Switch is in  
the “OFF” ( O ) position and the unit is  
unplugged.  
1. Firmly grasp the brush cartridge from the  
side of the unit and pull out from the unit.  
2. To remove any debris that may have  
collected around the dual PowerBrushes,  
rinse the brush cartridge under  
warm water.  
3. Replace the brush cartridge into the unit  
by gently guiding the cartridge in the unit.  
Once it is in place, firmly “snap” the brush  
cartridge in place.  
NOTE: Do not attempt to remove or insert  
the brush cartridge while the unit is  
running. This will damage your unit.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
8
 
Maintenance and care (continued)  
Storage  
Store in a dry area, at room temperature  
to avoid freezing.  
Tip:  
If you do not have the Brush  
Cartridge in all the way, the  
Dual PowerBrushes will not  
rotate. Firmly push the  
cartridge in place, while  
listening for the “snap” to  
assure proper placement.  
To replace the powerbrush belt  
If the belt should break, to replace:  
1.  
1. Remove the screw in the belt cover using a  
Phillips Screwdriver.  
2. Remove the broken belt.  
3. Replace the new belt over the 2 belt gears.  
4. Replace the belt cover door.  
WARNING:  
To reduce the risk of  
fire, electric shock or  
injury, unplug from outlet  
before servicing.  
Troubleshooting  
Cleaner won’t run  
Possible causes  
Remedies  
1. Power cord not plugged in  
1. Check electrical plug  
2. Blown fuse/tripped breaker  
3. C.I.D. needs to be reset  
2. Check/replace fuse or reset breaker.  
3. Reset C.I.D. (page 5).  
Reduced spray or no spray  
Possible causes  
Remedies  
1. Spray nozzle clogged  
1. Clean spray nozzle  
2. Solution tank empty  
2. Check/refill tank  
3. Tank not inserted properly  
3. Make sure tank is inserted properly  
Deep cleaner won't pick up cleaning solution  
Possible causes  
Remedies  
1. Collection tank is full  
1. Empty collection tank  
2. Collection tank drain plug is loose  
2. Check plug for snug fit  
9
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
 
Troubleshooting (continued)  
Dual PowerBrushes are not rotating  
Possible causes  
Remedies  
1. Removable cartridge not inserted  
1. Make sure to firmly "snap" the  
properly/all the way  
brush cartridge in place  
2. Broken belt  
2. Replace belt (page 9)  
Water coming out of vents  
Possible causes  
Remedies  
1. Tank is past full line  
1. Empty tank  
2. Unit may be tipped upright causing dirty  
2. Empty collection tank  
water to leak from collection tank  
Other maintenance or service not included in the manual should be performed by an  
authorized service representative.  
Thank you for selecting a BISSELL product.  
If you should happen to need assistance during assembly or operation, call 1-800-237-7691.  
Please do not return this product to the store.  
For any questions or concerns, BISSELL is happy to be of service.  
Contact us directly at 1-800-237-7691.  
BISSELL Consumer Services  
For information about repairs or replacement parts, or questions about your warranty, call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday  
Saturday  
Or write:  
8 a.m. — 10 p.m. ET  
9 a.m. — 8 p.m. ET  
BISSELL HOMECARE, INC  
PO Box 3606  
Grand Rapids MI 49501  
ATTN: Consumer Services  
Or visit the BISSELL website - www.bissell.com or www.2Xbissell.com  
When contacting BISSELL, have model number of cleaner available.  
Please record your Model Number: ___________________  
Please record your Purchase Date: ___________________  
NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event  
of a warranty claim. See Warranty on page 12 for details.  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
10  
 
Replacement parts  
Item  
1
Part No.  
203-2557  
Part Name  
Solution tank w/cap  
2
3
4
5
6
7
8
203-2552  
203-2554  
203-2514  
203-2517  
203-2537  
79B9  
Collection/solution tank cap  
Collection tank w/cap  
Brush cartridge  
Belt Cover  
Belt  
2X Little Green® Formula 32 oz.  
2X Little Green® Formula 16 oz.  
2X Pet Stain & Odor Formula 32 oz.  
2X Pet Stain & Odor Formula 16 oz.  
79B9-1  
9
74R7  
10  
74R7-1  
1
6
2
3
4
5
7/8  
9/10  
Please register your new BISSELL product at  
Earn Rewards Points!  
To qualify you for discounts, rebates, and other BISSELL perks.  
11  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
 
Warranty - BISSELL Spot Lifter® PowerBrush  
This warranty gives you specific legal rights, and you may also have other rights which may vary from state to  
state. If you need additional instruction regarding this warranty or have questions regarding what it may cover,  
please contact BISSELL Consumer Services by E-mail, telephone, or regular mail as described below.  
Keep your original sales receipt — it is your proof of warranty.  
Limited One Year Warranty  
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the product BISSELL  
Homecare, Inc. will repair or replace (with new or remanufactured components or products), at BISSELL’s option,  
free of charge from the date of purchase by the original purchaser, for one year any defective or  
malfunctioning part.  
See information below on "If your BISSELL product should require service".  
This warranty applies to product used for personal, and not commercial or rental service. This warranty does not apply  
to fans or routine maintenance components such as filters, belts, or brushes. Damage or malfunction caused by negli-  
gence, abuse, neglect, unauthorized repair, or any other use not in accordance with the User's Guide is  
not covered.  
If your BISSELL product should require service:  
Contact BISSELL Consumer Services to locate a BISSELL Authorized Service Center in your area.  
If you need information about repairs or replacement parts, or if you have questions about your warranty,  
contact BISSELL Consumer Services.  
Website or E-mail:  
Or call:  
BISSELL Consumer Services  
1-800-237-7691  
Monday - Friday 8 a.m. - 10 p.m. ET  
Saturday 9 a.m. - 8 p.m. ET  
Or Write:  
BISSELL Homecare, Inc.  
PO Box 3606  
Grand Rapids MI 49501  
ATTN: Consumer Services  
BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE  
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE  
OF THE PRODUCT.  
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above  
limitation or exclusion may not apply to you.  
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY  
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES  
EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY  
OPERATION OF LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE ONE YEAR  
DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.  
Some states do not allow limitations on how long an implied warranty lasts, so  
the above limitation may not apply to you.  
©2009 BISSELL Homecare, Inc  
Grand Rapids, Michigan  
All rights reserved. Printed in China  
Part Number 120-4146  
Rev 10/09  
Visit our website at:  
w w w . b i s s e l l . c o m  
8 0 0 . 2 3 7 . 7 6 9 1  
12  
 

Berkel Kitchen Utensil 823E User Manual
Bosch Appliances Home Security System DS820 User Manual
Bosch Power Tools Cordless Drill 15618 User Manual
BOXLIGHT Projector MP 86i User Manual
Braun Electric Shaver 3614 User Manual
Briggs Stratton Automobile Parts 25100 User Manual
Cadet Electric Heater CGH402 User Manual
Casio Digital Camera EX S1 EX M1 User Manual
Casio Digital Camera EX ZS5 User Manual
Cisco Systems Network Card CompactFlash Adapter User Manual