Blaupunkt Car Stereo System AntaresT60 User Manual

Radiophone

Antares T60

Operating and installation instructions

RADIOPHONE ANTARES T 60

EQUIPMENT DESCRIPTION

Volume control, on/off switch

Radiophone Antares T 60 -

and you can be sure safety

is first

Because the Antares T 60 is the symbiosis

consisting of a powerful GSM mobile tel-

ephone with full-duplex hands-free operation

and an excellent audio system with a digital

tuner and CD changer option.

SRC button, source selection between

radio, CD changer (if connected) or

auxiliary equipment/AUX (if con-

nected)

Switch from telephone to radio or CD

changer operation (CD changer op-

tional)

TA button, on/off switch for traffic an-

nouncement priority

When the quality of your in-car telephone and

road safety are important issues, theAntares

T 60 makes no compromises. And that’s to

your advantage.

BND button, to select the FM memory

banks and the MW and LW wave-

bands

To activate the Travelstore function

To switch from handset to hands-free

telephone operation (handset op-

tional)

And if you want to be absolutely sure that

safety is first, leave your hands where they

belong - on the steering wheel.

VOCS 08, the optional voice control system,

the TH 07 handset and the RCT 07 steering

wheel remote control unit transform the

Antares T 60 into one of the safest mobile

telephones on the market.

SMS button, to retrieve new SMS

messages

PaX button, to activate preset function

Multifunctional rocker switch

Display

Numbers buttons 0 - 9

#/AF button, to switch RDS conven-

ience functions on/off

So, have fun paging through and reading this

manual. Take some time and get acquainted

with your new Radiophone.

;

Telephone button

/MIX button, to adjust station seek

tuning sensitivity

To play CD titles in random order

OK button, to access the DSC menu

and submenu items, to confirm set-

tings

MEM button, list of radio stations

stored in the memory, to display CDs

in the unit and telephone book entries

CLR button, clear (delete) and back

button

AUDIO button, to adjust tone and bal-

ance/fader,

To switch Loudness on/off

Microphone mute

CONTENTS

Radiophone Antares T 60 - and

you can be sure safety is first ..... 3

Radio operation......................... 15

Selecting the radio mode ................. 15

RDS convenience functions

(AF, REG) ....................................... 15

Selecting the memory bank/

waveband........................................ 16

Selecting a radio station .................. 16

Paging through station networks...... 16

Storing stations manually ................. 16

Storing the stations with the

Safety information ...................... 7

Safety standards ............................... 8

Installation ......................................... 8

Accessories ...................................... 8

SIM card ........................................... 8

Operating the Radiophone.......... 9

Audio operation (without the

strongest signals automatically

telephone) ......................................... 9

For audio and telephone operation..... 9

Removing the SIM card ..................... 9

Switching the Radiophone on/off with

the vehicle ignition ............................. 9

Switching on the Radiophone when

the ignition is switched off ............... 10

Switching the Radiophone on after

the unit has been disconnected from

its power supply .............................. 10

(Travelstore) .................................... 17

Recalling stored stations.................. 17

Switching between stereo and mono . 17

Selecting Radiotext display .............. 17

Traffic radio reception............... 18

Switching priority for traffic

announcements on/off ..................... 18

CD changer operation............... 18

Selecting the CD changer mode...... 18

Selecting a CD................................ 18

Selecting a track on a CD ............... 18

Fast Cue/Review (audible) .............. 18

Playing tracks in random order (MIX) . 19

Displaying the list of CDs in the

Basic functions ......................... 10

Selecting the audio mode ................ 10

Direct access to functions (PaX) ...... 10

Controlling/adjusting the volume ...... 11

Tone and balance/fader ................... 12

Loudness ........................................ 12

Adjusting brightness, colour and

changer........................................... 19

Naming CDs ................................... 19

legibility ........................................... 13

Selecting the system language ........ 13

Optical theft protection .................... 14

Changing the DSC access code ..... 14

Resetting personal settings.............. 14

Connecting auxiliary equipment ....... 14

CODE theft protection..................... 15

CONTENTS

Selecting the phone number from

the list of missed calls...................... 28

Selecting the phone number from

General information .................. 21

Emergency call ................................ 21

Starting telephone operation .... 21

Selecting the telephone mode ......... 21

Inserting the SIM card ..................... 21

Entering the PIN code ..................... 21

Switching the PIN code on/off............. 22

Changing the PIN code....................... 22

Unblocking the SIM card ................. 23

the list of calls received ................... 28

Deleting an entry from the incoming/

outgoing call list .................................. 28

Deleting the incoming/outgoing call list 28

Answering a call .............................. 28

Automatic answer ............................... 29

Rejecting a call ................................ 29

Switching the microphone to mute... 29

Switching off the mute function ........... 29

Redial.............................................. 29

Automatic redial .................................. 29

Ending the automatic redial function .... 29

Call waiting (2nd call on hold).......... 29

Answering the 2nd call........................ 29

Rejecting the 2nd call.......................... 29

Hold/broker’s calls .......................... 30

Hold ................................................... 30

Broker’s calls ...................................... 30

Conference calls ............................. 30

Ending a conference call ..................... 30

Notebook function ........................... 30

Foreign calls.................................... 30

What do you have to do before

Basic functions ......................... 23

Adjusting the volume ....................... 23

Adjusting the ringing tone volume ........ 23

Adjusting the hands-free volume.......... 24

Adjusting the handset volume (handset

optional).............................................. 24

Traffic announcements (TA) during

hands-free operation........................ 24

Selecting the ringing tone ................ 25

Service functions ...................... 25

Audible call timer ............................. 25

Setting the timer.................................. 25

Displaying call charges/time ............ 26

Resetting the counter .......................... 26

Setting the Charges, Time display

travelling to a foreign country? ............ 31

How do I place a telephone call to a

during a call ........................................ 26

Using the telephone.................. 27

foreign country?.................................. 31

How can I be reached?....................... 31

How do I call a wired network telephone

number in the foreign country? ............ 31

Selecting a network ......................... 31

Displaying the available networks ........ 31

Adjusting the network search method.. 31

Editing the network list .................... 32

Adding a GSM network to the list........ 32

Moving an entry on the list................... 32

Deleting an entry on the list ................. 32

Dialing phone numbers .................... 27

Manual dialing ..................................... 27

One-touch dialing (from the Radio-

phone memory) ................................... 27

Speed-dial (from the SIM card

memory) ............................................. 27

Selecting a number from the phone

book ................................................... 27

Finding an entry by name .................... 27

Selecting the phone number from

the list of last numbers dialed........... 28

CONTENTS

Call forwarding................................ 32

Registering call forwarding .................. 33

Activating call forwarding .................... 33

Deactivating call forwarding ................ 33

Displaying call forwarding status ......... 33

Deleting individual call forwarding

Messages (SMS) / Mailbox....... 38

Reading new messages................... 38

Sending messages .......................... 38

Entering the service number ................ 38

Setting message validity ...................... 39

Reading old messages .................... 39

Deleting messages .......................... 39

Mailbox (Mobile box)........................ 39

Entering the mailbox phone number /

functions ............................................. 33

Deleting all the call forwarding

functions ............................................. 33

Call barring ..................................... 33

Activating call barring .......................... 33

Deactivating call barring ...................... 34

Displaying call barring status ............... 34

Changing the password for call

barring ................................................ 34

Locking the Phone .......................... 34

Switching on the phone lock ............... 34

Switching off the phone lock ............... 34

calling the mailbox ............................... 39

Cell broadcast messages ................ 40

Special functions ...................... 40

Determining the user group ............. 40

Switching user group on/off ................ 40

Entering AOC parameters ............... 40

Specifications ........................... 41

Amplifier.......................................... 41

Tuner............................................... 41

Telephone ....................................... 41

Phone book............................... 35

Entering names and telephone

numbers .......................................... 35

Moving the input cursor....................... 35

Deleting entries ................................... 35

Adding characters............................... 35

Storing names / telephone numbers 35

Finding entries................................. 36

Editing entries ................................. 36

Changing an entry............................... 36

Deleting an entry ................................. 36

Moving an entry in the phone book ...... 36

Copying an entry in the phone book .... 36

Capacity query ................................ 37

Locking/unlocking access to the

Operating the Radiophone with

the RCT 07 remote control unit

(optional)................................... 42

Radio operation ............................... 42

Telephone operation ........................ 42

CD changer operation (optional)...... 42

Telephone menu overview ........ 43

Radio menu overview................ 47

Glossary of Technical Terms ..... 49

Installation instructions............. 52

phone book ..................................... 37

Locking the phone book ...................... 37

Unlocking the phone book................... 37

Entering your own phone number .... 37

SAFETY INFORMATION

Using the telephone can result in interfer-

ence with the correct functioning of medi-

cal equipment that is not sufficiently

shielded, particularly near the antenna.

Please consult a doctor or the manufac-

turer of the medical device if you have any

questions. Other electronic equipment can

also be affected by electromagnetic inter-

ference.

Safety information

Traffic safety

Traffic safety always has the highest prior-

ity.

As the driver of a motor vehicle, it is your

responsibility to pay attention to the traffic

situation at all times. Never use your car

radio in a way that could distract you.

Please keep in mind that you travel a dis-

tance of 14 m per second at a speed of

only 50 km/h.

Should the traffic situation become particu-

larly demanding, we advise you not to use

this equipment.

If you are in an area where there is danger

of explosion, e.g. filling stations, chemical

factories or places where blasting work is

being done, switch your telephone off.

Always make sure that you are still able to

hear any warning signals coming from out-

side of your vehicle, such as police or fire

engine sirens, so that you can react ac-

cordingly.

Consequently, you should always select a

moderate volume for playing your car au-

dio equipment while you are driving.

Emergency calls

As with every other mobile telephone, the

Radiophone operates using a combination

of mobile radio and cross-country net-

works, radio signals and functions pro-

grammed by the user. As a result, there is

no guarantee that your call will always go

through. Never depend exclusively on a

mobile telephone or similar equipment

under life-threatening circumstances (e.g.

in medical emergencies).

The telephone interface of the Radiophone

is only able to make and receive calls when

it is activated, located in an area served

by a GSM 900 radio network and when

the signal is strong enough.

Using the telephone while driving

Please observe all laws and regulations

regarding the use of mobile telephones in

motor vehicles.

• Concentrate fully on your driving.

• Stop at a safe place before using the

telephone.

Emergency calls may not be possible on

all mobile telephone networks or only if

certain network services and/or certain

performance features are active. Contact

the local network operators for more de-

tailed information.

• If otherwise unavoidable:

Use only hands-free operation if you

have to use the telephone while you are

driving.

Traffic safety always has the highest prior-

ity.

Please read this instruction manual for fur-

ther information and consult your local serv-

ice provider.

Using the telephone in critical

areas

Always switch off the mobile telephone in

areas where it is forbidden to use a mo-

bile phone or if this equipment could cause

electromagnetic interference or otherwise

dangerous situations.

When placing an emergency call, be sure to

supply all the necessary information as ac-

curately as possible. Remember that your

mobile telephone may be the only means of

communication at the scene of an accident.

IMPORTANT INFORMATION

Do not hang up until you are told to do so.

Remote control

Using the RCT 07 infrared remote control

(7 607 570 510) you can conveniently control

all of the most important functions of your

Radiophone from the steering wheel.

Also read the information in the section on

“Telephone operation - GSM emergency

calls”.

Safety standards

Handset (telephone receiver)

The mobile telephone has been manufactured

in accordance with all of the applicable radio

frequency (RF) safety standards and recom-

mendations determined by the government

offices and organisations responsible (e.g. the

VDE standard DIN-0848).

With the TH 07 Blaupunkt handset (7 607 570

512) it is possible to place telephone calls with

or without using the hands-free function.

The system will switch automatically from

hands-free to handset operation when the

handset is removed from the cradle.

Installation

There is a relatively strong magnet in

the handset.

Keep everything that could react adversely

to magnetic fields well away from the hand-

set. This includes diskettes, check cards,

etc. Important data may be deleted.

Only a trained service technician is author-

ised to install and service the Radiophone in

your vehicle. Faulty installation or servicing

can be dangerous and will result in the expiry

of your guarantee.

This equipment must not be operated with-

out a suitable GSM or combination antenna

mounted on the outside of the vehicle. The

equipment including the GSM or combination

antenna must be installed by an authorised

Bosch service centre only.

Amplifiers

All Blaupunkt amplifiers

Voice control system

(Available for German only)

To ensure trouble-free operation, the positive

power supply line must be connected via the

ignition and the permanent +12 V lead.

Using the VOCS 08 voice control system, you

can control the most important system func-

tions by speaking certain commands aloud

in German.

Do not ground the speaker outputs!

Because the motorist is subjected to a mini-

mum amount of distraction when operating

the equipment using a voice control system,

this feature makes an important contribution

to road safety.

Accessories

Use Blaupunkt-approved accessories and

spare parts only.

You can use the following Blaupunkt products

with this equipment:

SIM card

CD changers

This Radiophone has been equipped for tel-

ephone operation using modern 3-V SIM

cards. Please ask your dealer for more infor-

mation.

The Blaupunkt CDC A 08 and the IDC A 09

CD changers can be connected to the Ra-

diophone.

OPERATING THE RADIOPHONE

appear in the display.Also refer to “Switching

the PIN code on/off”.

Operating the Radiophone

Audio operation (without the

telephone)

➮ Press ON.

Removing the SIM card

Never just pull out the SIM card.

You could destroy it.

Note:

➮ Push the SIM card in gently, towards the

If the card tongue is not pushed in when you

switch on the unit, the Radiophone will switch

off again automatically after 15 seconds.

If you push the card tongue in within the first

15 seconds, the Radiophone will not switch

off.

Radiophone.

The card tongue holding the SIM card will

eject.

➮ Remove the SIM card.

Switching the Radiophone on/off

with the vehicle ignition

➮ When the Radiophone is on, switch off

the vehicle ignition and remove the igni-

tion key.

When you switch on the Radiophone for the

first time,

➮ enter the four-digit safety code in the ra-

dio pass using the 0 - 9 buttons.

If you enter an incorrect digit,

➮ press CLR to delete the digit.

➮ Press OK to confirm the code.

The Radiophone will switch off.

➮ Switch on the ignition.

The Radiophone will switch on if you switched

it off with the vehicle ignition.

For audio and telephone

operation

Note:

With the card tongue pushed in,

If the ignition timer is switched on, the Radio-

phone will not switch off until after the time

set has elapsed.

If the SIM card is still in the Radiophone when

it is switched off, you will hear two beeps.

If the ignition is switched off during a telephone

call, the Radiophone will remain switched on

until the telephone call has been completed.

➮ press the card tongue gently in the direc-

tion of the Radiophone until you feel

slight resistance.

➮ Release the card tongue.

The card tongue will now eject from the Ra-

diophone.

➮ Lay the SIM card on the card tongue

with the chip facing upwards and to-

wards the Radiophone and push it into

the slot until you feel slight resistance.

Set the ignition timer

You can set the ignition timer to determine

whether and how long the Radiophone should

continue to play after the ignition has been

switched off.

➮ Press the SIM card gently down at the

back onto the card tongue so that it is

lying completely on the card tongue.

➮ If you are in telephone mode, press the

SRC button to switch to radio operation.

➮ Push the card tongue into the Radio-

phone gently until you feel slight resist-

ance and you hear the card tongue click

into position.

➮ Press OK to access the DSC menu.

➮ Use

to select the menu item Setup.

➮ Press OK.

The Radiophone will switch on. If the PIN in-

quiry has been activated, ENTER PIN will

➮ Press

timer.

to select the menu item Ignit.

OPERATING THE RADIOPHONE

BASIC FUNCTIONS

➮ Press OK.

Basic functions

➮ Press

to select the desired setting

from between 0 (no delay) and 90 min.

Selecting the audio mode

You can switch between radio, CD changer

operation and the operation of an auxiliary

audio source (if connected).

➮ Press OK.

➮ Press SRC to exit the DSC menu.

Switching on the Radiophone

when the ignition is switched off

➮ Press ON.

➮ Press SRC repeatedly until the functions

for the operating mode you want to se-

lect appear in the display.

The Radiophone will switch on.

Direct access to functions (PaX)

You can program the PaX button with one

function you use frequently for direct access.

To avoid running down the battery, the Ra-

diophone will switch off again automatically

after one hour.

Select one of the following functions:

● Radiotext

Switching the Radiophone on

after the unit has been

disconnected from its power

supply

● Telephone number

● Mailbox

● Send SMS

If the Radiophone has been disconnected

from the battery (e.g. when the vehicle is be-

ing repaired) and is reconnected, you will be

required to enter the security code in the ra-

dio pass the first time you switch it on again.

● Network selection

● Call forwarding

● Telephone book

Note:

You can change the function you have se-

lected for the PaX button at any time.

Programming the PaX button

➮ Press and hold down the PaX button for

longer than one second.

The list of available functions will appear in

the display. If the PaX button has already been

programmed, the cursor will indicate the func-

tion currently selected.

➮ Press

to select the desired func-

tion.

➮ Press OK.

PaX program. finished will appear in the dis-

play.

The main telephone menu will now appear in

the display. The PaX button is ready to use.

BASIC FUNCTIONS

➮ Press OK to access the DSC menu.

Activating the PaX function

➮ Press

Setup.

to select the menu item

to adjust the Radiophone to

To activate the function you have programmed

on the PaX button,

➮ Press OK.

➮ Press

Beep.

➮ press the PaX button briefly.

Controlling/adjusting the volume

➮ Press OK.

➮ Press

Controlling the system volume

Once the Radiophone has been switched on,

it will play at the pre-defined power-on vol-

ume.

the desired volume level.

➮ Press OK.

➮ To increase the system volume, turn the

➮ Press SRC to exit the DSC menu.

volume control to the right.

Adjusting the volume for traffic

announcements (TA Volume)

➮ To decrease the system volume, turn the

volume control to the left.

You can adjust the volume for traffic an-

nouncements and for the message that there

is no traffic radio station currently available.

The traffic announcement will be broadcast

at this volume, even if the system volume is

lower.

The volume level selected will appear in the

display.

Adjusting the power-on volume

(Volume FIX)

➮ Press OK to access the DSC menu.

➮ Press

Radio.

to select the menu item

➮ Press

Radio.

to select the menu item

➮ Press OK.

➮ Press

➮ Press OK.

to select the menu item

➮ Press

to select the menu item

Volume FIX.

TA volume.

➮ Press OK.

➮ Press

or turn the volume control

➮ Press

or turn the volume control

knob to adjust the Radiophone to the de-

sired power-on volume level.

knob to adjust the Radiophone to the de-

sired volume level.

➮ Press OK.

➮ Press SRC to exit the DSC menu.

If you select the Last Volume option, the

power-on volume will be the volume last set

before the Radiophone was switched off.

➮ Press OK.

➮ Press SRC to exit the DSC menu.

Adjusting the beep volume

You will hear a beep whenever you activate

functions that require you to press a button

for longer than one second.

You can set the beep volume to a level from

0 to 9.

BASIC FUNCTIONS

➮ Press OK.

➮ Press

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

Tone and balance/fader

to select the desired setting.

Treble

➮ Press AUDIO.

➮ To adjust the treble, press or

Loudness

Bass

➮ Press AUDIO.

➮ To adjust the bass, press or

Switching Loudness on/off

➮ To switch Loudness on/off,

press AUDIO for approx. 1 second until

you hear a beep.

Balance

➮ Press AUDIO twice.

LOUDNESS ON or LOUDNESS OFF will

appear briefly in the display.

➮ To adjust the balance between the left/

right speakers, press or

Adjusting Loudness increase

Fader

➮ Press AUDIO twice.

➮ To adjust the fader between the front/

rear speakers, press or

Loudness boosts low frequencies for more

bass, especially at low volume, for a more

natural sound.

You can adjust the Loudness setting as fol-

lows:

To exit the Audio menu, press AUDIO again.

Or, after a few seconds, the menu will switch

back to the main menu automatically.

LOUD 1 - minimum boost

LOUD 6 - maximum boost

➮ Press OK to access the DSC menu.

Music/Speech tone adjustment

➮ Press

Radio.

to select the menu item

to select the desired setting.

RDS radio stations differentiate between

music and speech programs.

You can adjust the tone for speech programs:

➮ Press OK.

Off

Level 1

- no tone adjustment

- linear (no bass, treble and Loud-

ness changes)

➮ Press

Loudness.

➮ Press OK.

➮ Press

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

Level 2 - 4 - different adjustments for volume,

bass and treble with Loudness

switched off

Choose the setting you prefer.

Traffic announcements are always played in

the “Speech” mode.

➮ Press OK to access the DSC menu.

➮ Press

Radio.

to select the menu item

➮ Press OK.

➮ Press

Music/Speech.

to select the menu item

BASIC FUNCTIONS

Optimising display legibility (Angle)

Adjusting brightness, colour and

legibility

You can adjust the legibility of the display to

the best angle.

Adjusting the colour of the Radiophone

lighting

➮ Press OK to access the DSC menu.

➮ Press

Setup.

to select the menu item

to select the desired setting.

You can adjust the equipment lighting in

stages to match it to the dashboard lighting

in your vehicle.

The colours can be changed in different

shades between green and red.

➮ Press OK.

➮ Press

Angle.

➮ Press OK to access the DSC menu.

➮ Press OK.

➮ Press

Setup.

to select the menu item

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

➮ Press OK.

➮ Press

to select the menu item

Selecting the system language

Vario Colour.

➮ Press OK.

You can select the language in which the text

will appear in the display. If there is no SIM

card in the Radiophone, the text will appear

in English if you select the setting Automatic

Text. If there is a SIM card in the Radiophone,

the language used by the SIM card will ap-

pear.

➮ Press

to select the desired setting.

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

Adjusting the brightness of the

Radiophone lighting

➮ Press OK to access the DSC menu.

You can adjust the brightness of the lighting

for day (D) and night lighting (N) in stages,

depending on how the instrument lighting has

been connected.

➮ Press

Setup.

to select the menu item

to select the desired setting.

➮ Press OK.

➮ Press OK to access the DSC menu.

➮ Press

Language.

➮ Press

Setup.

to select the menu item

➮ Press OK.

➮ Press

➮ Press OK.

➮ Press

to select the menu item

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

Brightness.

➮ Press OK.

➮ Press

➮ Press OK.

➮ Press

to select D or N.

to select the desired setting.

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

BASIC FUNCTIONS

Optical theft protection

Resetting personal settings

You can select whether or not the card tongue

should flash as optical theft protection.

You can reset any of the settings made in the

DSC menu for the radio, the phone or the SIM

card.

➮ Press OK to access the DSC menu.

➮ Press

Setup.

to select the menu item

to select the menu item Card

to select Off or On.

➮ Press

Setup.

to select the menu item

➮ Press OK.

➮ Press

LED.

➮ Press OK.

➮ Press

Reset.

to select the menu item

➮ Press OK.

➮ Press

➮ Press OK.

➮ Use the number keys to enter the DSC

access code.

➮ Press SRC to exit the DSC menu.

➮ Press

to select the desired setting.

Changing the DSC access code

➮ Press OK twice.

➮ Press SRC to exit the DSC menu.

Before you can make any changes to impor-

tant settings in the DSC menu, you will be

required to enter a code. This code is set to

0000 at the factory. You can alter this code at

any time.

Connecting auxiliary equipment

In place of a CD changer, you can also con-

nect any other auxiliary audio source with a

line output. These sources include a portable

CD player, MiniDisc player or MP3 player.

To connect an external audio source, you

need an adapter cable. You can purchase an

adapter cable from any authorised Blaupunkt

dealer.

➮ Press OK to access the DSC menu.

➮ Press

Setup.

to select the menu item

➮ Press OK.

➮ Press

to select the menu item

Change code.

Switching the auxiliary equipment on/off

➮ Press OK.

➮ During radio operation, press OK to ac-

➮ Use the number keys to enter the factory

code, or if the code has already been

changed, the currently valid code.

cess the DSC menu.

➮ Press

Radio.

to select the menu item

➮ Use the number keys to enter the new

➮ Press OK.

➮ Press

➮ Press OK.

➮ Press

➮ Press OK.

code.

to select the menu item Aux.

to select Off or On.

➮ Enter the new code a second time.

➮ Press SRC to exit the DSC menu.

If the auxiliary audio source is connected

properly and switched on in the DSC menu,

it can be selected by pressing SRC.

BASIC FUNCTIONS

RADIO OPERATION

CODE theft protection

Radio operation

The Radiophone has been equipped with a

code for effective protection against theft. The

code must be entered each time the unit is

disconnected from its power supply. The code

inquiry can be switched on or off.

This Radiophone has been equipped with an

RDS radio receiver. Many FM stations now

transmit a signal along with their regular pro-

gramming to provide such additional informa-

tion as the station name. The station name

will appear in the display as soon as it is re-

ceived.

Switching the code inquiry on/off

➮ With the Radiophone switched off, press

and hold down number keys 1 and 4.

Other RDS advantages include the AF and

REG functions.

➮ Switch the Radiophone on by inserting

the SIM card or pressing the ON button.

Selecting the radio mode

A code inquiry will appear in the display.

If the Radiophone is currently in the telephone

or CD changer mode,

➮ Use the number keys to enter the valid

code.

➮ press SRC repeatedly until the radio

mode functions appear.

The code inquiry will be switched either on or

off.

Note:

The telephone mode has priority. If the phone

is in use, you cannot switch to the radio or

CD changer modes.

Note:

You will find the valid code in the radio pass

included with the Radiophone.

If the code is entered incorrectly three times,

you will have to wait for a fixed time period.

“WAIT 1 HOUR” appears in the display. The

unit must remain switched on during this hour.

RDS convenience functions

(AF, REG)

The RDS convenience functions, AF (Alter-

nate Frequency) and REG (REGional), en-

hance the performance of your car radio.

● AF: When this RDS function has been

activated, the radio will automatically

search for the best frequency in recep-

tion range of the station selected.

● REG: A number of radio stations broad-

cast special programs for different re-

gions with different contents. If you acti-

vate the REG function, the radio will not

automatically switch to an alternate fre-

quency with different regional program-

ming.

Switching AF on/off

➮ Press #/AF briefly.

“AF” will light up in the display when this RDS

function has been activated.

RADIO OPERATION

➮ Press

to select the menu item

Switching REG on/off

Sensitivity.

➮ Press #/AF for approx. 1 second until

REGIONAL ON or REGIONAL OFF ap-

pears in the display.

➮ Press OK.

➮ Press

or LO.

to select the menu item DX

to select the desired setting.

REG will appear in the display when this RDS

function has been activated.

➮ Press OK.

➮ Press

➮ Press OK.

Selecting the memory bank/

waveband

With this radio, you can tune into stations on

the FM and AM (MW and LW) wavebands.

➮ Press SRC to exit the DSC menu.

Searching for/selecting radio stations

manually

➮ Press BND to switch between the wave-

bands or memory banks.

You can also select a radio station manually.

➮ Press or

Selecting a radio station

There are different ways in which you can

select a radio station.

Note:

You will not be able to select a station manu-

ally unless AF is deactivated.

Automatic station selection

(seek tuning)

Entering a station frequency directly

For FM and FMT you can also enter a station

frequency directly with the number buttons.

➮ Press or

The radio will tune into the next station within

reception range.

➮ Press 0.

➮ Enter the frequency without adding the

Selecting seek tuning sensitivity

decimal point.

Use this function to determine whether the

radio tunes into only those stations with strong

reception signals or into weaker stations as

well.

➮ If you want to delete your entry, press

CLR.

Paging through station networks

If one radio station has several different pro-

grams, you can page through this “station

network”.

➮ Press to switch between high sensitiv-

ity (stations with weaker signals) and low

sensitivity (local stations).

lo will light up in the display if you have se-

lected low sensitivity.

➮ Press or to tune into the next station

in the station network.

In the DSC menu you can also select the

degree of sensitivity for LO (local) and DX

(distant) reception.

Note:

To use this function, you must have activated

the RDS convenience functions first.

➮ Press OK to access the DSC menu.

➮ Press

Radio.

to select the menu item

Storing stations manually

➮ Select the desired memory bank: FM,

➮ Press OK.

FMT, MW or LW.

➮ Select the desired station.

RADIO OPERATION

For the station presets 1 - 9

➮ press one of the buttons 1 - 9 for approx.

➮ Press BND to select the memory bank

1 second until you hear a beep.

or waveband.

For the station presets 10 - 19 (for FM only)

➮ Press MEM.

➮ press 1 briefly and

A menu listing the stations stored will appear

in the display.

➮ then press one of the button 0 - 9 for

approx. 1 second until you hear a beep.

➮ Press

to select the desired station.

➮ Press OK to tune into the station se-

Storing the stations with the

strongest signals automatically

(Travelstore)

You can automatically store the nine stations

with the strongest reception signals in the

region (FM only). These stations will be stored

in the FMT memory bank.

lected.

Switching between stereo and

mono

When you switch the Radiophone on, it will

automatically begin to play in stereo. If sta-

tion reception should begin to deteriorate, the

Radiophone will automatically switch to mono.

Note:

Any stations already stored in this memory

bank will be deleted automatically.

Selecting Radiotext display

➮ Press OK to access the DSC menu.

➮ Press BND/TS.

➮ Press

Radio.

to select the menu item

to select one of the following

The

storing

process

will

begin.

TRAVELSTORE will flash in the display.

Once the storing process has been com-

pleted, the radio station stored on preset 1 in

the FMT memory bank will begin to play. The

station list will appear in the display for sev-

eral seconds.

➮ Press OK.

➮ Press

Radiotext.

➮ Press OK.

➮ Press

settings:

Recalling stored stations

There are different ways in which you can

recall stored radio stations.

Off

- switched off

- switched on

On/Eng. off - switched on only when the

engine is off

Numbers buttons

➮ Select the memory bank or the wave-

➮ Press OK to confirm your selection.

➮ Press SRC to exit the DSC menu.

band.

For station presets 1 - 9

➮ press the desired button from 1 - 9

briefly.

For station presets 10 - 19

➮ first press the 1 briefly

➮ then press the desired button from 0 - 9

within 2 seconds.

TRAFFIC RADIO RECEPTION

Traffic radio reception

CD CHANGER OPERATION

CD changer operation

Switching priority for traffic

announcements on/off

➮ Press TA.

When traffic announcement priority is

switched on, TA will light up in the display.

Selecting the CD changer mode

If the Radiophone is currently in the telephone

or radio mode,

➮ press SRC repeatedly until the CD

changer functions appear in the display.

Note:

The telephone mode has priority. If the phone

is in use, you cannot switch to the radio or

CD changer modes.

You will hear a warning beep,

● if you leave the reception range of the

traffic radio station you are listening to

● if you leave the reception range of the

traffic radio station you are tuned into

while listening to a CD and the automatic

seek tuning function is unable to find an-

other traffic radio station

Selecting a CD

There are different ways in which you can

select a CD.

Selecting the next CD up or down

● if you switch from a traffic radio station to

a radio station that does not broadcast

traffic information

➮ To select the next CD up or down, press

or once or as often as necessary.

Selecting the CD directly using the

numbers buttons

In this case, either switch off traffic announce-

ment priority or switch to a radio station that

broadcasts traffic information.

➮ Press the corresponding numbers button

from 1 - 9.

Selecting a CD directly from the menu

➮ Press MEM.

A menu listing the CDs available will appear

in the display.

➮ Press

to select the desired CD.

➮ Press OK to begin CD playback.

Selecting a track on a CD

➮ To select a track up or down on the CD

currently playing, press or once or

repeatedly as required.

Fast Cue/Review (audible)

For fast Cue or Review

➮ press and hold down or until Cue or

Review begins.

CD CHANGER OPERATION

To continue to name other CDs, proceed as

follows.

Playing tracks in random order

(MIX)

➮ Press

to select the next CD you

➮ Press /MIX briefly.

want to name.

All of the tracks on the CD currently playing

will be played in random order. When all the

tracks on a CD have been played, the next

CD will be selected and its tracks will play in

random order.

➮ Press OK.

➮ Use the numbers buttons to enter the

name.

➮ Press OK to confirm your entry.

To stop naming CDs,

➮ To end the MIX function, press /MIX

again briefly.

➮ press SRC.

To exit Disc Naming without saving the en-

tries made,

Displaying the list of CDs in the

changer

➮ Press MEM.

➮ press CLR twice for a longer time.

Deleting one or all the characters

Naming CDs

While entering a name you can delete one or

all the characters.

To allow you to recognise your CDs more

quickly, you can enter individual names for

up to 99 CDs. The names can contain up to

seven characters.

To delete one character,

➮ press

to select the character you

want to delete.

➮ In the CD changer mode, press OK to

➮ Press CLR briefly.

To delete all of the characters,

➮ press CLR for longer than 1 second.

access the DSC menu.

➮ Press

Radio.

to select the menu item

to select the menu item Disc

to select the menu item

➮ Press OK.

➮ Press

Naming.

➮ Press OK.

➮ Press

Change name.

➮ Press OK.

➮ Press

to select the desired CD.

➮ Press OK.

The first input field will flash. You can begin to

enter the characters.

➮ Use the numbers buttons to enter a

name. For more information, read the

section on “Entering names” in the chap-

ter on the “Telephone”.

➮ Press OK to confirm your entry.

CD CHANGER OPERATION

Deleting CD names

➮ Press OK to access the DSC menu.

➮ Press

Radio.

to select the menu item

to select the menu item Disc

to select the menu item

➮ Press OK.

➮ Press

Naming.

➮ Press OK.

➮ Press

Clear name.

➮ Press OK.

A selection menu with the names stored will

appear.

To clear the name of one CD,

➮ press

to select the desired name.

➮ Press OK.

The name will be deleted. Then the selection

menu with the names will appear again.

To clear all of the names stored,

➮ press OK for longer than 1 second.

To exit the DSC menu,

➮ press SRC.

TELEPHONE FUNCTIONS

STARTING TELEPHONE

OPERATION

General information

Starting telephone

operation

Emergency call

Using the Antares T 60 telephone, you can

make emergency calls at any time anywhere

in the world. Emergency calls can also be

made without a valid SIM card.All you need

is a GSM 900 network.

The emergency number in the GSM network

is 112 all over the world. Your call is always

put through to the nearest rescue control cen-

tre.

Selecting the telephone mode

If you have already inserted a valid SIM card,

➮ press

The telephone mode will be activated. The

network selected will appear in the display.

Inserting the SIM card

With the card tongue pushed in,

➮ Switch the Radiophone on by pushing

➮ press the card tongue gently in the di-

rection of the Radiophone until you feel

slight resistance.

in the card tongue in.

If the Radiophone was switched off by press-

ing the on/off button,

➮ Release the card tongue.

The card tongue will now eject from the Ra-

diophone.

➮ press the on/off button.

The Radiophone will switch on.

➮ Press

➮ Lay the SIM card on the card tongue

with the chip facing upwards and to-

wards the Radiophone and push it into

the slot until you feel slight resistance.

The telephone mode will be activated, but

please note: No valid SIM card will appear

in the display.

➮ Press the SIM card gently down at the

back onto the card tongue so that it is

lying completely on the card tongue.

➮ Enter 112 on the 12-button keypad.

➮ Press

The call will be put through to the nearest res-

cue control centre.

➮ Push the card tongue into the Radio-

phone gently until you feel slight resist-

ance and you hear the card tongue click

into position.

Provide them with all of the necessary infor-

mation as accurately as possible.

Do not end the call until you are told to do so!

The Radiophone will switch on. If the PIN in-

quiry has been activated, ENTER PIN will

appear in the display.Also refer to “Switching

the PIN code on/off”.

Important:

Use the 112 number in emergency situations

only. Any improper use of the emergency call

number could have legal consequences.

Entering the PIN code

The PIN code (personal identification number)

protects your telephone against being used

by unauthorised persons. The PIN code and

the PUK (Personal Unblock code) are sup-

plied along with the SIM card by your service

provider. You can change the PIN code at any

time; for more information, read “Changing the

PIN code”.

STARTING TELEPHONE OPERATION

Important:

➮ Press

to select the PIN code you

Be sure to memorise your PIN code and

do not reveal it to any unauthorised per-

sons.

want to switch on or off (normally

PIN 1).

➮ Press OK.

A menu PIN 1 containing all the functions

available will appear in the display.

When ENTER PIN appears in the display,

➮ enter your PIN number on the 0 - 9

➮ Press

tion On or Off.

➮ Press OK.

to select the desired func-

keypad, beginning with the first digit.

➮ After you have entered the PIN code

completely, press OK or #.

The PIN code must be entered to confirm this

change.

Note:

If you enter the PIN code incorrectly three

times in succession, the SIM card will be

locked. For more information, refer to the sec-

tion on “Unblocking the SIM card”.

➮ Enter your PIN on the 0 - 9 keypad, be-

ginning with the first digit.

➮ Press OK.

Now the Radiophone will return to the origi-

nal PIN 1 menu.

Once the PIN code has been entered cor-

rectly and confirmed, the Radiophone will

switch on and the operating mode used last

(radio, CD changer or telephone) will be acti-

vated.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

Switching the PIN code on/off

Changing the PIN code

If your SIM card supports this function, it is

possible to switch the PIN inquiry on or off. If

the PIN inquiry is switched off, anyone can

use your SIM card and the Antares T 60 tel-

ephone. If the PIN inquiry is active, the valid

PIN must be entered each time you switch

the Radiophone on.

➮ Access the PIN 1 menu as described in

the section on “Switching the PIN code

on/off”.

➮ Press

to select the function

Change.

➮ Press OK.

Note:

➮ Enter your old PIN on the 0 - 9 keypad,

It is not possible to switch off the PIN inquiry

unless your SIM card supports this function.

beginning with the first digit.

➮ Press OK.

➮ Press

to switch to the telephone

➮ Enter your new PIN on the 0 - 9 keypad,

mode.

beginning with the first digit

➮ Press OK.

The DSC menu will appear in the display. The

➮ and confirm the new number by enter-

ing it again.

cursor will mark Setup.

➮ Press OK.

You will return to the PIN 1 menu.

➮ Press OK.

➮ Press as often as necessary until the

cursor marks the menu item PIN-

code.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press OK.

STARTING TELEPHONE

OPERATION

TELEPHONE SETTINGS

Unblocking the SIM card

Basic functions

If you enter an incorrect PIN three times in

succession, the SIM card will be locked. To

unblock the SIM card, you have to enter the

PUK. PUK stands for Personal UnblocK code.

The PUK is an eight-digit number, supplied

by your service provider along with your SIM

card and the PIN code. The PUK cannot be

changed!

Adjusting the volume

You can adjust the volume for the ringing tone,

hands-free function and for the handset (the

handset is available as a special accessory)

during a telephone call.

➮ During a telephone call (while the

phone is ringing or while you are speak-

ing), turn the volume control knob to the

left to decrease the volume and to the

right to increase the volume.

If you insert a blocked SIM card into the Ra-

diophone, ENTER PUK will appear in the dis-

play.

➮ Enter your eight-digit PUK on the 0 - 9

It is also possible to adjust the volumes for

the ringing tone, hands-free function and for

the handset in a menu.

keypad, beginning with the first digit and

➮ press OK or #.

Adjusting the ringing tone volume

The ringing tone volume can be adjusted in

the menu in stages from 0 to 9.

Note:

By selecting 0 you will switch the ringing tone

off. Incoming calls will then be indicated visu-

ally in the display only.

➮ In the telephone mode, press OK.

The DSC menu will appear in the display. The

cursor will mark Setup.

➮ Press OK.

The Setup menu will appear in the display.

The cursor will mark Volume.

➮ Press OK.

➮ Press to select Ringing tone.

➮ Press OK.

You will hear the phone ring at the volume

currently selected.

➮ Press

knob to select the desired volume.

➮ Press OK.

You will return to the Volume menu.

or turn the volume control

TELEPHONE SETTINGS

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press to select Handset.

➮ Press OK.

On the handset, you will hear the phone ring

at the volume currently selected.

Adjusting the hands-free volume

➮ Press

or turn the volume control

knob to select the desired volume.

The hands-free volume can be adjusted in

stages from 0 to 63.

➮ Press OK.

You will return to the Volume menu.

➮ In the telephone mode, press OK.

The DSC menu will appear in the display. The

cursor will mark Setup.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press OK.

The Setup menu will appear in the display.

The cursor will mark Volume.

Traffic announcements (TA)

during hands-free operation

You can select whether you want traffic mes-

sages to be put through or held back while

you are using the phone.

➮ Press OK.

➮ Press to select Handsfree.

➮ Press OK.

You will hear the phone ring at the volume

currently selected.

➮ In the telephone mode, press OK.

The DSC menu will appear in the display. The

cursor will mark Setup.

➮ Press

or turn the volume control

knob to select the desired volume.

➮ Press OK.

➮ Press to select TA / Call.

➮ Press OK.

The TA DURING CALL menu will appear in

the display.

You will return to the Volume menu.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press to select the desired option On

or Off.

Adjusting the handset volume (handset

optional)

➮ Press OK.

If you have selected On, you must also se-

lect the channel over which the traffic infor-

mation will be emitted.

The handset volume can be adjusted in

stages from 1 to 8. This menu item will not be

available unless the optional handset has

been connected.

➮ Press to make the desired setting

Left or Right.

➮ In the telephone mode, press OK.

The DSC menu will appear in the display. The

cursor will mark Setup.

➮ Press OK.

You will return to the Setup menu.

➮ Press OK.

The Setup menu will appear in the display.

The cursor will mark Volume.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press OK.

TELEPHONE SETTINGS

Selecting the ringing tone

You can select from among six different ring-

ing tones:

Service functions

Audible call timer

● Up and down,

● Oktave,

With the audible call timer you can have a

signal sound at selected intervals during a

phone call. This function allows you to keep

track of the telephone costs.

The time interval for the audible call timer func-

tion can be set from 15 to 300 seconds.

● Trill,

● 2x Oktave,

● 2x Trill,

➮ In the telephone mode, press OK.

● Triad and

The DSC menu will appear in the display. The

● Off.

cursor will mark Setup.

➮ In the telephone mode, press OK.

The DSC menu will appear in the display. The

➮ Press OK.

➮ Press to select Audib. timer.

➮ Press OK.

cursor will mark Setup.

➮ Press OK.

The AUDIBLE CALL TIMER menu will ap-

pear. The number of seconds selected is in-

dicated after TIMER.

➮ Press to select Ring. tones.

➮ Press OK.

The RING. TONES menu will appear in the

➮ Press to select the desired setting

Off or TIMER.

display.

➮ Press to select Ringing tone.

➮ Press OK.

The ringing tone currently selected will be

played repeatedly.

➮ Press OK.

If you select Off, you will return to the Setup

menu.

If you select TIMER, you can set the time in-

terval for the signal sound.

➮ Press

to select the desired ringing

tone.

Setting the timer

➮ Press OK.

➮ Use the 0 - 9 keypad to enter the de-

sired interval. Use CLR to correct your

entry if necessary.

You will return to the RING. TONES menu.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press OK.

You will return to the Setup menu.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

TELEPHONE SETTINGS

➮ Press OK.

Displaying call charges/time

➮ Press to select the desired setting for

If this function is supported by your service

provider, you can display the call time and

the charges for the last call and for all calls.

Charge or Time.

➮ Press OK.

You will return to the CALL METERS menu.

➮ In the telephone mode, press OK.

The DSC menu will appear in the display. The

cursor will mark Setup.

➮ Press OK.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Call meters.

➮ Press OK.

The CALL METERS menu will appear in the

display.

➮ Press to select the option for display-

ing the last calls or all calls.

➮ Press OK.

The desired information will appear in the dis-

play.

➮ If you want to return to the previous

menu, press OK.

Resetting the counter

➮ In the CALL METERS menu, select the

menu item Reset.

➮ Use the 0 - 9 keypad to enter the Radio-

phone access code.

You will return to the CALL METERS menu.

➮ Press CLR repeatedly until you return

to the main menu or press and hold

down CLR for longer than one second

to return to the DSC menu.

Setting the Charges, Time display during

a call

During a call, you can have either the current

charges or the elapsed call time displayed.

➮ In the CALL METERS menu, select the

menu item During call.

The SHOW DURING CALL menu will appear

in the display.

USING THE TELEPHONE

Speed-dial (from the SIM card memory)

Using the telephone

You can dial the phone numbers stored for

keys 1 to 9 on your SIM card at the touch of a

button.

Dialing phone numbers

You can dial phone numbers in four different

ways:

➮ Press

➮ Press down the corresponding key from

1 - 9 to dial the number stored in the

SIM card memory.

● Manual dialing

● One-touch dialing

● Speed-dial and

The corresponding number or the name en-

tered for the number will appear in the dis-

play and the dialing process will begin.

● Selecting numbers from the phone

book.

Manual dialing

Selecting a number from the phone book

➮ Use the 0 - 9 number keys to enter the

number you want to dial, including the

area code.

Telephone numbers that you have already

stored in the phone book can also be selected

directly. For more information on storing num-

bers and names in the phone book, please

refer to the chapter entitled “Phone book”.

➮ If you enter an incorrect digit by mistake,

you can press CLR, and to correct

your mistake.

➮ While the Radiophone is in the tel-

ephone mode, press MEM.

➮ Once you can see the complete number

in the display, press

The phone book will appear. You can choose

as to whether you want to find the entry by its

name or its position in the memory.

The Radiophone will now dial the number.

Note:

➮ Press to select the search method

When you dial numbers in the GSM network,

you are always required to dial the area code

first. Even if you dial the mobile phone number

of a subscriber in the same network, you must

still dial the area code first. The only numbers

which do not require an area code are the

service numbers supplied to you by your pro-

vider.

you want to use.

➮ Press OK.

Finding an entry by name

If you select the option Find entry by name,

you will be required to enter the first few let-

ters of the name.

➮ Use the 0 - 9 keys to enter up to the first

three letters of the entry. For more infor-

mation, read the section on “Entering

names and telephone numbers” in the

chapter entitled “Phone book”.

One-touch dialing (from the Radiophone

memory)

You can dial the phone numbers stored for

keys 1 to 9 on your Radiophone at the touch

of a button.

➮ Press OK.

➮ Press down the corresponding key from

1 - 9 to dial the number stored in the

Radiophone memory.

The corresponding section of the phone book

will appear in the display. If there is no entry

matching the letters entered, the section with

the next closest letter will appear.

The corresponding number or the name en-

tered for the number will appear in the dis-

play and the dialing process will begin.

➮ Use

➮ Press

to select the desired entry.

The Radiophone will now dial this number.

USING THE TELEPHONE

The list indicating the numbers of the calls

that have been received will appear in the dis-

play. If the caller’s number has been stored

along with the name in the phone book, the

corresponding name will appear in the dis-

play.

Selecting the phone number from

the list of last numbers dialed

The last numbers you dialed will automati-

cally be stored on the SIM card. You can use

this list to place calls to these numbers.

➮ While the Radiophone is in telephone

➮ Use

➮ Press

to select the desired entry.

mode, press

briefly.

The list with the numbers dialed last will ap-

pear.

The Radiophone will now dial this number.

➮ Use

➮ Press

to select the desired number.

Deleting an entry from the incoming/

outgoing call list

➮ Select the desired list (incoming/outgo-

The Radiophone will now dial this number.

ing calls).

Selecting the phone number from

the list of missed calls

Any calls you may have missed will be stored

in a list. You can use this list to place calls to

these numbers. These numbers will not be

stored unless the caller has activated call line

identification.

➮ Use

➮ Press or

➮ Confirm the following query with OK.

to select the desired entry.

Deleting the incoming/outgoing call list

➮ Select the desired list (incoming/outgo-

ing calls).

➮ While the Radiophone is in telephone

➮ Use

to select the corresponding

mode, press briefly.

list (Redial list, Rec’d calls, Calls).

The list indicating the numbers of the calls

that have been missed will appear in the dis-

play. If the caller’s number has been stored

along with the name in the phone book, the

corresponding name will appear in the dis-

play.

➮ Press or

➮ Confirm the following query with OK.

Answering a call

Incoming calls are indicated by the ringing

tone, the message Accept? in the display and

the display will change colour.

➮ Use

➮ Press

to select the desired entry.

If you want to accept the call,

The Radiophone will now dial this number.

➮ press

➮ pick up the handset receiver (if con-

Selecting the phone number from

the list of calls received

The calls you receive are also stored on a

list. You can use this list to place calls to these

numbers. These numbers will not be stored

unless the caller has activated call line identi-

fication.

nected).

Note:

It is possible to switch off the ringing tone. For

more information, refer to the section on “Set-

ting the ringing tone volume” in the chapter

on “Basic functions”.

➮ While the Radiophone is in telephone

mode, press briefly.

USING THE TELEPHONE

Automatic answer

Automatic redial

In the Setup menu, you can make a setting

so that all incoming calls are answered auto-

matically.

In the Setup menu, you can make a setting

so that the number is redialled automatically

until the call goes through.

➮ In the telephone mode, press OK.

The DSC menu will appear. The cursor will

➮ In the telephone mode, press OK.

The DSC menu will appear. The cursor will

mark Setup.

➮ Press OK.

➮ Press to select Auto. answer.

➮ Press OK.

➮ Press to select Auto. redial.

➮ Press OK.

The AUTOMATIC ANSWER menu will ap-

The AUTOMATIC REDIAL menu will appear

pear in the display.

in the display.

➮ Press to select the desired setting On

or Off.

➮ Press to select the desired setting On

or Off.

➮ Press OK.

You will return to the Setup menu.

➮ Press OK.

You will return to the Setup menu.

Ending the automatic redial function

Rejecting a call

➮ Once the dialling process has begun,

If you do not want to answer a call,

➮ press CLR while the phone is ringing.

The caller will hear a busy signal.

press

to end automatic redial.

Call waiting (2nd call on hold)

During a telephone call, you can also accept

a second incoming call. The first caller will

then be put on “hold”.

Switching the microphone to

mute

During a call, you can switch the microphone

to mute.

Note:

It might be necessary to order “Call waiting”

service from your provider. Your service pro-

vider has more detailed information.

➮ Press AUDIO.

Mute On will appear in the display.

Switching off the mute function

➮ Press AUDIO again.

Answering the 2nd call

If you receive a second call while you are al-

ready using the telephone, you will hear a sig-

nal; if you want to answer the 2nd call,

Mute Off will appear briefly in the display.

Redial

➮ press OK.

You can have a number redialled from the list

of the numbers called last. For more informa-

tion, refer to the section on “Dialling telephone

numbers from the list of the last calls made”

in this chapter.

The first caller will be put on “hold”.

Rejecting the 2nd call

➮ Press CLR.

The caller will hear a busy signal.

USING THE TELEPHONE

Note:

Hold/broker’s calls

During a conference call you can also answer

a call from a third caller. Press OK to answer

the call or CLR to reject it. The conference

will be put on “hold”. Then you can press MEM

to switch between the conference call and the

third caller (broker’s call).

Hold means that you place or receive a sec-

ond call, while you are already using the tel-

ephone. You can only speak to one caller at a

time. The callers have no contact with one

another.

Hold

Notebook function

When you are already using the phone,

During a telephone call you can use the

keypad to enter a telephone number.After the

call has ended, the number will appear in the

display and can be used as desired.

➮ press MEM to activate the hold function.

➮ Now you can use the 0 - 9 buttons to

enter the telephone number for the sec-

ond call.

Note:

➮ Once the complete number appears in

If the vehicle ignition is switched off during a

telephone call, the Radiophone will switch off

automatically after the call has ended. Any

telephone number you have entered in the

notebook will be deleted.

the display, press

The call will be put through to the second

number. The first caller will stay on “hold”.

Broker’s calls

A broker’s call means you switch from one

caller to the other.

Foreign calls

The internationally uniform GSM standard

allows you to place telephone calls with your

RADIOPHONE in foreign countries as well.

➮ Press MEM to switch between the two

callers.

Note:

It is necessary that there is a roaming agree-

ment between the service providers in the two

countries. In addition, your service provider

must activate international roaming for your

SIM card.

With a caller on “hold”, you can also accept a

third incoming call. Press OK to accept the

call or CLR to reject it.

If you accept a third call, the connection to

the active caller will be terminated.

You can obtain a current list of the countries

with the service providers responsible (net-

work code and name) and the different

charges involved.

Conference calls

With conference calls there is a direct con-

nection between all of the callers.

Once you have two callers as described in

the section on “Hold/broker’s calls”,

Note:

If you want to place calls using your RADIO-

PHONE in a foreign country, contact your

service provider well in advance.

➮ press OK.

The conference call will be set up. CONFER-

ENCE will appear in the display.

Ending a conference call

To end the conference call,

➮ press CLR.

USING THE TELEPHONE

What do you have to do before travelling

to a foreign country?

Selecting a network

In areas served by more than one GSM net-

work, you can select a preferred network. It is

necessary for your provider to have a roam-

ing agreement with that network. In addition,

you can also list the networks according to

priority. This can prove useful for your trips

abroad because sometimes the difference in

the charges made by the different networks

is considerable. For more information, read

the section on “Foreign calls”.

➮ If you have not already done so, have

your service provider activate your SIM

card for international roaming.

How do I place a telephone call to a

foreign country?

➮ Dial the corresponding country code,

➮ enter the area code and then

➮ the telephone number.

Displaying the available networks

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Network sel.

➮ Press OK.

Note:

You can replace the first two digits of the coun-

try code with + (press 0 for approx. one sec-

ond).

Example:

Country code:

Area code:

Phone number:

0049

05121

49 . . . . Blaupunkt

Germany

Hildesheim

The NETWORK SELECTION menu will ap-

pear in the display.

The number you

enter:

➮ Press to select Available.

➮ Press OK.

After a short search, a list of the available

GSM networks will appear.

+49512149 . . . . .

Note:

Enter the country code for all the telephone

numbers you want to store.

Adjusting the network search method

How can I be reached?

You can select whether a manual or an auto-

matic search is made for the GSM networks.

Callers from your home country simply dial

your Radiophone number. Callers outside of

your home country must first dial your usual

country code, even if you are currently in a

foreign country.

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Network sel.

➮ Press OK.

How do I call a wired network telephone

number in the foreign country?

➮ Dial the area code and

The NETWORK SELECTION menu will ap-

pear in the display.

➮ then the telephone number.

➮ Press to select Search method.

➮ Press OK.

➮ Press

method.

➮ Press OK.

The country code is not entered because your

Radiophone has logged onto the foreign net-

work.

to select the desired

USING THE TELEPHONE

You will return to the NETWORK SELEC-

TION menu.

Moving an entry on the list

➮ Select the menu item Move in the

PREF. LIST menu.

➮ Press CLR as often as necessary until

you return to the main menu or press

and hold CLR for longer than one sec-

ond to return to the DSC menu.

➮ Press OK.

The current network list will appear in the dis-

play.

➮ Press to select the entry you want to

Editing the network list

You can edit the network list to select pre-

ferred GSM networks.

move.

➮ Press OK.

➮ Press

to its new position.

➮ Press OK.

to move the GSM network

Adding a GSM network to the list

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Network sel.

➮ Press OK.

You will return to the PREF. LIST menu.

Deleting an entry on the list

➮ Select the menu item Delete in the

PREF. LIST menu.

The NETWORK SELECTION menu will ap-

pear in the display.

➮ Press OK.

The current network list will appear in the dis-

play.

➮ Press to select Pref. list.

➮ Press OK.

➮ Press to select Add.

➮ Press OK.

Now you can either enter a new GSM net-

work or add one which has already been

stored in the Radiophone to the list.

➮ Press to select the entry you want to

delete.

➮ Press OK.

The GSM network selected will be deleted

from the list. You will return to the PREF. LIST

menu.

➮ Press to select Known or New.

Call forwarding

You can set call forwarding for different situa-

tions.

Note:

If you want to add a new GSM network to the

list, you will be required to enter the network

code and the network name. Your provider

can supply you with this information.

● General call forwarding

● Call forwarding if busy

● Call forwarding if no answer

If you select Known, a list of the factory-pro-

grammed GSM networks will appear.

● Call forwarding if unreachable (outside

➮ Press

to select the desired net-

of your provider’s service area)

work.

➮ Press OK.

You will return to the PREF. LIST menu.

USING THE TELEPHONE

Registering call forwarding

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

Displaying call forwarding status

➮ Proceed as described for “Registering

call forwarding”

➮ For your last selection, select Status.

The status of the call forwarding function will

be indicated in the display.

➮ Press to select Forwarding.

➮ Press OK.

The FORWARDING menu will appear in the

display.

Deleting individual call forwarding

functions

➮ Press to select the situation for which

you want to activate call forwarding.

➮ Proceed as described for “Registering

call forwarding”

➮ Press OK.

➮ For your last selection, select Delete.

➮ Press OK.

The call forwarding function selected will be

deleted.

➮ Press to select whether you want to

activate call forwarding for any or all of

the following services: telephone calls,

data transmission, faxes.

➮ Press OK.

➮ Select Register.

➮ Press OK.

Deleting all the call forwarding functions

➮ Select the menu item Delete in the

FORWARDING menu.

➮ Enter the complete telephone number

to which you want to forward the calls

on the 0 - 9 buttons.

➮ Press OK.

An inquiry will appear in the display. You must

confirm it if you really want to delete.

➮ Press OK.

➮ Select Yes if you really want to delete all

Activating call forwarding

the call forwarding functions.

➮ Proceed as described for “Registering

➮ Press OK.

call forwarding”

Call barring

You can bar incoming or outgoing calls. In

order to do so, you require a password, which

you can obtain from your provider.

➮ For your last selection, select Activate.

➮ Press OK.

You will return to the FORWARDING menu.

Deactivating call forwarding

Activating call barring

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

➮ Proceed as described for “Registering

call forwarding”

➮ For your last selection, select Deacti-

vate.

➮ Press to select Barring.

➮ Press OK.

The BARRING menu will appear in the dis-

play.

USING THE TELEPHONE

➮ Press to select call barring for incom-

Locking the Phone

There are different ways in which you can lock

your Radiophone.

ing or outgoing calls.

➮ Press OK.

➮ Press to select whether you want to

activate call forwarding for any or all of

the following services: telephone calls,

data transmission, faxes.

● No calls possible except for emergency

calls (All)

● Only the numbers stored from 1-9 on

the SIM card (One-touch)

➮ Press OK.

➮ Press to select Activate.

➮ Press OK.

● SIM card numbers and Radiophone

numbers (One-touch and speed-dial).

Switching on the phone lock

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Phone lock.

➮ Press OK.

➮ Enter the password with buttons 0 - 9.

➮ Press OK.

You will return to the BARRING menu.

Deactivating call barring

➮ Proceed as described under “Activating

call barring”.

The PHONE LOCK menu will appear in the

display.

➮ For your last selection, select Deacti-

vate.

➮ Press to select one of the phone lock

➮ Enter the password with buttons 0 - 9.

➮ Press OK.

options as described above.

➮ Press OK.

➮ Enter the access code using the buttons

Displaying call barring status

0 - 9.

➮ Proceed as described under “Activating

You will return to the PHONE LOCK menu.

call barring”.

➮ For your last selection, select Status.

➮ Press OK.

The call barring status will appear in the dis-

play.

Switching off the phone lock

➮ In the telephone mode, press OK.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Phone lock.

➮ Press OK.

Changing the password for call barring

➮ Select the menu item Password in the

BARRING menu.

The PHONE LOCK menu will appear in the

➮ Press OK.

display.

➮ Enter the old password with the buttons

➮ Press to select Off.

➮ Press OK.

0 - 9.

➮ Press OK.

➮ Enter the access code using the buttons

➮ Enter the new password with the but-

0 - 9.

tons 0 - 9 twice.

You will return to the PHONE LOCK menu.

➮ Press OK.

PHONE BOOK

Storing names / telephone

Phone book

numbers

Entering names and telephone

numbers

➮ Press OK in the telephone mode.

The DSC menu will appear in the display. The

cursor will mark Setup.

Names and telephone numbers are entered

using the buttons 0 - 9.

➮ Press to select Phone book.

➮ Press OK.

The menu will appear in the display. The cur-

sor will mark Find name.

The buttons are sequence buttons, so that

you are required to sometimes press the but-

ton repeatedly to get the desired character.

The character set has been allocated to the

buttons as follows

➮ Press to select Add entry.

➮ Press OK.

1 (space)

, ! ? : ’ " ( )

The ADD ENTRY menu will appear in the dis-

play.

➮ Press to choose between the Radio-

phone memory and the SIM card

memory.

➮ Press OK.

➮ Enter the phone number with the but-

tons 0 - 9.

➮ Press OK.

➮ Enter the name with the buttons 0 - 9.

Note:

The length of the phone book names entries

depends on the SIM card (usually 16 charac-

ters). The phone number can have up to 20

digits.

Moving the input cursor

When you enter characters using different

buttons, the input cursor will move one space

to the right automatically. If two or more char-

acters must be entered in succession using

the same button, the input cursor must be

moved manually.

➮ Press OK.

You will be required to enter a memory

number for the entry.

➮ Enter a memory number with the but-

tons 0 - 9 or

➮ Press

to move the input cursor.

Deleting entries

➮ Press OK to allocate the number auto-

If you have entered an incorrect letters or

numbers,

matically.

You will return to the ADD ENTRY menu.

➮ press CLR as often as necessary.

Adding characters

You can add characters to existing text.

➮ Press

to move the input cursor.

➮ Add another character using the buttons

0 - 9.

PHONE BOOK

➮ Use the buttons 0 - 9 to make any

changes, press CLR to delete charac-

ters.

Finding entries

You can search for entries in the phone book

by either name or memory number.

➮ Once you have made all the changes,

press OK.

➮ Press MEM in the telephone mode.

The menu will appear in the display. The cur-

sor will mark Find name.

You will return to the phone book list.

Deleting an entry

➮ Press to select Find name or Find

pos.

➮ Select the entry you would like to delete

in the phone book as described in the

section on “Finding entries”.

➮ Press OK.

The menu selected, either FIND ENTRY BY

NAME or FIND ENTRY BY POSITION, will

appear in the display.

➮ Press OK.

A menu with the functions Change, Delete,

Move and Copy will appear in the display.

➮ Use the buttons 0 - 9 to enter the first

three characters of the name or the po-

sition number (memory number).

➮ Press to select Delete.

➮ Press OK.

The entry will be deleted. You will return to

the phone book list.

➮ Press OK.

The phone will appear in the display, indicat-

ing the entry matching name or number en-

tered in the top line.

Moving an entry in the phone book

➮ Select the entry you would like to move

in the phone book as described in the

section on “Finding entries”.

If no matching entry is found, the nearest

match will appear in the first line.

Editing entries

➮ Press OK.

A menu with the functions Change, Delete,

Move and Copy will appear in the display.

Changing an entry

➮ Select the entry you would like to

change in the phone book as described

in the section on “Finding entries”.

➮ Press to select Move.

➮ Press OK.

➮ Press

to move the entry.

A menu with the functions Change, Delete,

Move and Copy will appear in the display.

➮ Press OK.

The entry will be moved. You will return to the

phone book list.

➮ Press to select Change.

➮ Press OK.

The name of the entry will appear in the top

line, the phone number in the second line.

Copying an entry in the phone book

➮ Select the entry you would like to move

in the phone book as described in the

section on “Finding entries”.

➮ Press

to move the cursor in the

first line.

➮ Press OK.

A menu with the functions Change, Delete,

Move and Copy will appear in the display.

➮ Use the buttons 0 - 9 to make any

changes, press CLR to delete charac-

ters.

➮ Press to select Copy.

➮ Press OK.

➮ Press OK to move to the second line.

PHONE BOOK

➮ Press

sition in which you want to copy it.

➮ Press OK.

to move the entry to the po-

Entering your own phone number

You can enter up to three phone numbers for

yourself and the mailbox number.

The entry will be copied. You will return to the

phone book list.

➮ Press OK in the telephone mode.

The DSC menu will appear in the display. The

cursor will mark Setup.

Capacity query

➮ Press OK.

➮ Press to select My number.

➮ Press OK in the telephone mode.

➮ Press to select Phone book.

➮ Press OK.

➮ Press to select Number 1...3 or

Mailbox.

➮ Press to select Capacity.

➮ Press to select SIM card or Phone.

➮ Press OK.

➮ Use buttons 0 - 9 to enter the corre-

sponding number.

The number of memory positions available

will appear briefly in the display. Then the

phone book menu will appear.

➮ Press OK.

➮ Use buttons 0 - 9 to enter the corre-

sponding name.

➮ Press OK.

Locking/unlocking access to the

phone book

You can lock the phone book memory of the

Radiophone itself, of the SIM card or both.

Locking the phone book

➮ Press OK in the telephone mode.

➮ Press to select Phone book.

➮ Press OK.

➮ Press to select Access.

➮ Press to select Phone, SIM card or

All.

➮ Press OK.

➮ Enter the access code with the buttons

0 - 9.

➮ Press OK.

Unlocking the phone book

➮ Proceed as described under “Locking

the phone book”.

➮ Select the menu item No locks.

➮ Press OK.

➮ Enter the access code with the buttons

0 - 9.

➮ Press OK.

MESSAGES / MAILBOX

➮ Press to select New.

➮ Press OK.

➮ Now use the buttons 0 - 9 to enter the

message. For more information on how

to enter text, refer to “Entering names/

telephone numbers” in the chapter enti-

tled “Phone book”.

Messages (SMS) / Mailbox

You can send and receive SMS messages

with your Radiophone.

Reading new messages

New messages are indicated in the display

with a

symbol. When a new message is

received you will hear a beep.

When you have received a new message,

➮ press SMS.

Note:

Message texts can have up to a maximum of

160 characters.

➮ Press OK.

The message will appear in the display.

To “page through” the messages,

➮ press / .

➮ Use the buttons 0 - 9 to enter the phone

number.

➮ Press OK.

If you want to place a call to the sender,

➮ Press

and store the message.

➮ Press OK.

The message will be sent. You will return to

the Message output menu.

to either send, store or send

➮ press

Once you have read the message,

➮ press CLR.

Aselection will appear in the display. You can

choose whether you want to delete the mes-

sage or store it in the memory.

Entering the service number

To be able to send messages, you must first

enter your provider’s service number. The

service number is usually stored on the SIM

card and used automatically.

If you have to enter the service number again

or would like to change it,

➮ Press

to select the corresponding

option.

➮ Press OK.

If you select No, the message will be put into

storage.

➮ press OK in the telephone mode.

➮ Press to select Menu.

➮ Press OK.

Sending messages

➮ Press OK in the telephone mode.

The DSC menu will appear in the display. The

➮ Press to select Messages.

➮ Press OK.

➮ Press to select Parameters.

➮ Press OK.

➮ Press to select Service no.

➮ Press OK.

cursor will mark Setup.

➮ Press to select Menu.

➮ Press OK.

The menu will appear in the display. The cur-

sor will mark Mailbox.

➮ Press to select Messages.

➮ Press OK.

➮ Press to select Output.

The OUTPUT menu will appear in the dis-

play.

➮ Enter the service number with the but-

tons 0 - 9.

➮ Press OK.

The PARAMETERS menu will appear in the

display.

MESSAGES / MAILBOX

Aselection will appear in the display. You can

choose whether or not to delete the message.

Setting message validity

You can select a setting to determine how long

the Service Center should try and send the

message to its recipient. You can select a time

frame of one to seven days.

➮ Press

with the desired option.

➮ Press OK.

Deleting messages

You can delete messages directly after you

have read them.

➮ Press OK in the telephone mode.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Messages.

➮ Press OK.

➮ Press to select Parameters.

➮ Press OK.

➮ Press to select Validity.

➮ Press OK.

Once you have read the message,

➮ press CLR.

Aselection will appear in the display. You can

choose whether or not to delete the message.

➮ Press

to select Yes.

➮ Press OK.

Note:

➮ Enter the number of days with the but-

If you want to delete an old message, you

have to retrieve it first as described under

“Reading old messages”.

tons 0 - 9.

➮ Press OK.

The PARAMETERS menu will appear in the

display.

Mailbox (Mobile box)

The mailbox (also known as Mobile box) is

an answering machine made available to you

by your provider. To use the mailbox, you have

to enter the mailbox number. You can obtain

the mailbox number from your provider.

Reading old messages

➮ Press OK in the telephone mode.

➮ Press to select Menu.

➮ Press OK.

So that any incoming calls you miss are for-

warded to the mailbox, you have to set up

call forwarding for the mailbox. For informa-

tion on setting up call forwarding and the in-

structions, refer to the section on “Call for-

warding” in the chapter on “Using the tel-

ephone”.

➮ Press to select Messages.

➮ Press OK.

➮ Press to select Storage.

The Storage with prepared and sent mes-

sages will appear in the display. The mes-

sages received will indicate the date, time and

sender’s number.

Entering the mailbox phone number /

calling the mailbox

➮ Press

to select the desired mes-

sage.

➮ Press OK in the telephone mode.

➮ Press to select Menu.

➮ Press OK.

The menu will appear in the display. The cur-

sor will mark Mailbox.

➮ Press OK.

If you want to place a call to the sender,

➮ press

Once you have read the message,

➮ press CLR.

➮ Press OK.

SPECIAL FUNCTIONS

MESSAGES / MAILBOX

If no number has been entered as yet,

Special functions

➮ enter the mailbox number with the but-

tons 0 - 9.

Determining the user group

User group is a function that is available from

your provider.

➮ Press OK.

A call will be placed to your mailbox.

With “user group”, the telephone can be used

by a limited group of people only.

If the mailbox number has already been en-

tered, you will be connected with the mailbox

directly once you select the menu item

Mailbox.

Note:

Please contact your provider to set up the user

groups.

For more information on the mailbox and how

to use your mailbox, please contact your pro-

vider.

Switching user group on/off

➮ Press OK in the telephone mode.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select User group.

➮ Press OK.

➮ Press to select whether the calls can

be placed within a special group only

(Group only) or in a group with a spe-

cial Index.

Cell broadcast messages

Cell broadcast is a regional short message

service available from your provider. These

short messages are broadcast in numbered

channels.

Your provider can supply you with other in-

formation such as a list of the channels and

categories as well as the charges involved.

If you want to use Cell Broadcast,

➮ press OK in the telephone mode.

➮ Press to select Menu.

➮ Press OK.

➮ Press to select Messages.

➮ Press OK.

➮ Use with the buttons 0 - 9 to enter the

access code for the group, if required.

➮ Press OK.

The USER GROUP menu will appear in the

display.

➮ Press to select Broadcast.

➮ Press OK.

Entering AOC parameters

➮ Press to select On.

➮ Press OK.

With a SIM card that supports AOC (Advice

of Charge), you can enter a charges rate and

a credit amount. When the credit has been

used up, it can be refilled by an authorised

holder of the phone access code or the PIN2.

➮ Enter the number of the channel you

want to use with the buttons 0 - 9.

➮ Press OK.

The MESSAGES menu will appear in the dis-

play.

➮ Press OK in the telephone mode.

The DSC menu will appear in the display. The

cursor will mark Setup.

➮ Press OK.

➮ Press to select AOC param.

SPECIAL FUNCTIONS

SPECIFICATIONS

➮ Press OK.

Specifications

➮ Use the buttons 0 - 9 to enter the phone

access code or PIN2.

Amplifier

➮ Press to select between Charge to

have the charges per unit indicated and

the input of a Credit.

Output power:

4 x 23 watts RMS

according to

DIN 45 324

at 14.4 V

4 x 35 watts

max. power

➮ Press OK.

➮ Use the buttons 0 - 9 to enter your set-

tings.

➮ Press OK.

The AOC PARAMETERS menu will appear

Tuner

in the display.

Wavebands:

87.5 – 108 MHz

531 – 1 602 kHz

153 – 279 kHz

FM sensitivity:

0.9 µV at 26 dB

Signal/Noise ratio

FM frequency range: 30 - 16 000 Hz

Telephone

Standard:

GSM

Frequency band:

Transmit

Receive

890 – 915 MHz

935 – 960 MHz

Transmission power: Class 2 / 8 watts

Sensitivity:

-108 dBm

Impedance:

Antenna connection

50 ohms

Hands-free microphone

660 ohms

REMOTE CONTROL (OPTIONAL)

CD changer operation (optional)

Operating the Radiophone

with the RCT 07 remote

control unit (optional)

With the optional RCT 07 remote control unit,

you can operate the most important functions

of the Antares T 60 conveniently and safely

from the steering wheel.

Activates the telephone mode

V-

Decreases the volume

V+

Increases the volume

Switches traffic radio standby on/off

Plays next track, moves cursor in lists

Plays previous track, restarts the cur-

rent track, moves the cursor in lists

Radio operation

SRC Source switch to radio

Activates the telephone mode

Retrieves the CD list and makes se-

lections in the CD list

V-

Decreases the volume

V+

Increases the volume

Switching traffic radio standby on/off

Seek tuning up, moves cursor in lists

Seek tuning down, moves the cursor

in lists

SRC Source switch between radio, CD

changer (optional) or an auxiliary au-

dio source (AUX)

Retrieves the station list and makes

selections in the station list

Telephone operation

Retrieves the list of calls dialled last

Places a call to the number in the

display

V-

Decreases the volume

V+

Increases the volume

Switches traffic radio standby on/off

Retrieves the list of calls received,

moves cursor in lists

Retrieves the list of missed calls,

moves the cursor in lists

SRC Returns to the audio source activated

last

Press briefly: Retrieves the phone

book, sorted alphabetically.

Press long: Retrieves the phone

book, sorted numerically

TELEPHONE MENU OVERVIEW

DSC menu – Telephone

Setup

select with

Phone book

back with

CLR

SRC

back to radio

Setup

Volume

Ringing tone

Handfree

Auto. answer

Auto. redial

Ring. tones

On / Off

Ringing tone

Up and down

Oktave

Trill

2x Oktave

2x Trill

Triad

Off

My number

Number 1*

Number 2*

Number 3*

Mailbox

AOC param.*

Charge*

PIN 2

Home net

Roaming net

Audib. timer

PIN-code

TA / Call

Off

15 ... 300 s

PIN 1

PIN 2*

Change

On / Off

* Display of the menu item depends on the SIM card used.

TELEPHONE MENU OVERVIEW

DSC menu – Telephone

Setup

select with

back with

CLR

SRC

Phone book

back to radio

Mailbox

Call

Messages

Input

Output

New

Patterns

Return call

Delay

Meeting

Appointment

Confirmat.

Edit

Storage

Broadcast

Parameters

No more messages

On / Off

Validity

1 ... 7 days

– – – –

Service no.

Network sel.

Call meters

Available

Search method

Pref. list

Automatic / Manual

Add

Move

Delete

List

Known / New

Last call

All calls

Home calls*

Roam calls*

Reset

– – – – – . – – Euro*, – – – – – . – – Min

PIN 2 ?*

During call

Charge / Time

* Display of the menu item depends on the SIM card used.

TELEPHONE MENU OVERVIEW

Forwarding

All calls

If busy

If no answer

unreachable

Clear all

Speech

Data

FAX

All service

Yes / No

Status

Delete

Activate

Deactivate

Service

no.

Barring

Outgoing

Incoming

all calls

Internation

Roaming net

Speech

Data

FAX

All service

all calls

Roaming net

Status

Activate

Deactivate

Service no.

Password

change password

Phone lock

All

On / Off

Off

Access code

– – – –

One-touch

+ speed-dial

Fixed no.

List

New number

Activate

PIN 2 ?

User group

Index

Preferred

Select

Index: ?

Group only

Access code – – – –

* Display of the menu item depends on the SIM card used.

TELEPHONE MENU OVERVIEW

DSC menu – Telephone

Setup

select with

back with

Phone book

CLR

SRC

back to radio

Phone book

Find name

Find Pos.

Name? (use 10-key keypad - ABC)

Position? (use 10-key keypad - 1 ... 0)

Add entry

SIM card

Phone

Number?

Access

Lock

Phone

SIM card

All

Access code

– – – –

No locks

Capacity

SIM card

Phone

Free entries

My number*

* Display of the menu item depends on the SIM card used.

RADIO MENU OVERVIEW

SRC

DSC menu – Radio

Setup

Radio

select with

back with

CLR

SRC

back to radio

Setup

Language

Deutsch

English

Italiano

Français

Español

Nederlands

Svenska

Português

Automatic

Card LED

Beep

On / Off

Volume Off / 1 ... 9

G . . . . .". . . . . R

Keytones

Vario Colour

Brightness

D . . . . .I. . . . .

N . . . . .I. . . . .

Angle

. . . . . . .II. . . . . .

Ignit. timer

Change code

Reset

0 ..... 90 min

old Code – – – –

Access code – – – –

2x new Code – – – –

Radio

Phone

SIM card

RADIO MENU OVERVIEW

SRC

DSC menu – Radio

Setup

Radio

select with

back with

CLR

SRC

back to radio

Radio

Radiotext

Loudness

TA volume

Volume FIX

Sensitivity

Off / On / On/Eng. off

Level 1 ... 6

Level 0 ... 63

DX Low / Middle / High

LO Low / Middle / High

Aux

On / Off

Disc Naming**

Change name

Clear name

Music/Speech

Off ... Level 4

** if a CD changer is connected

GLOSSARY

Call waiting

Glossary of Technical

Terms

A quiet beep during a telephone call informs

you that another caller is trying to reach you.

Access code

Cell Broadcast

Barred functions can be operated after the

access code has been entered.

Cell Broadcast is a short message service

which operates in numbered “channels”.

The channels transmit different special mes-

sages.

Request more detailed information and a list

of the available channels from your network

operator/service provider.

Adapter card

Holder for small SIM cards. With the help of

an adapter card, it is possible to use small

SIM cards in equipment which was otherwise

designed for use with standard-sized SIM

cards.

Changer

AF - Alternative Frequency

CD changer (accessory)

This function enables the equipment to auto-

matically select the best available frequency

for the reception of an RDS program.

CLR - Clear (delete)

Returns to previous menu.

Amplifier

DSC - Direct Software Control

Amplifies the output power.

With the help of DSC you can adjust the ba-

sic factory settings and functions to your per-

sonal needs and to store these settings.

AOC parameter - Advice of Charge

List of charges in which a charge per unit and

a credit balance can be entered.

EON - Enhanced Other Networks

EON is an RDS service which makes it pos-

sible to exchange station information within a

station broadcasting network. The radio will,

for example, automatically switch from a non

TA station to a TA station in the same radio

network in order to broadcast a traffic an-

nouncement. After the traffic announcement

has been broadcast, the radio will switch back

to the previous network once again.

AUD - Audio

Tone adjustments for bass and treble, fader

(front and rear) and balance (left and right).

BND (Band)

Switches between wavebands and memory

levels.

Broker’s call

GSM network - Global System for Mobile

Communication

It is possible to make a second call without

ending the first one. You can then switch from

one call to the other.

You can also answer a call from a second

party without ending the call to the first.

European cellular telephone standard avail-

able world-wide

GLOSSARY

Handset

PIN code - Personal Identification Number

Telephone receiver complete with cradle (ac-

cessory).

PIN 1

Prevents your SIM card from being used by

unauthorised persons. You must enter the PIN

code each time you insert the SIM card.

IMEI - International Mobile Equipment Iden-

tity

PIN 2

International identity for mobile equipment.

The IMEI code entered at the factory includes

the serial number, manufacturer and country

code. You can find this code in the car radio

pass.

Code required for special functions.

If you have authorisation for the use of spe-

cial functions with your card, you need a PIN

2-code.

Both codes come with the SIM card and can

be altered.

International Roaming

Making telephone calls in foreign countries

with your own telephone or your own SIM card

using a different network operator/service

provider. There must be a roaming agreement

between your service provider and the for-

eign network.

PUK - Personal Unblock Key, Master PIN

Code, Super PIN, etc.

Eight-digit unblock code which can reactivate

the SIM card. This becomes necessary if the

PIN code for the SIM card has been entered

incorrectly three times.

The PUK code comes with the SIM card and

cannot be altered. Make sure you keep it in a

safe place.

Mailbox

Electronic mailbox provided by network op-

erators/service providers for spoken mes-

sages. The mailbox can be compared to an

answering machine.

Radiotext

Additional RDS information provided by the

station, for example, on the program broad-

cast.

MEM - Memory

Retrieves stored data, such as radio stations,

telephone numbers.

RDS - Radio Data System

Service provided by radio stations for more

convenient radio listening pleasure.

The station name appears in the display, for

example, rather than the frequency.

MIX

CDs/CD tracks are played in random order.

MUTE

Other RDS functions include:

Switches off the microphone in the telephone

mode.

AF - Alternative Frequency

EON - Enhanced Other Networks

RT - Radiotext

TA - Traffic Announcement

TP - Traffic Program

PaX - Personal Access

Allows direct access to a function in radio or

CD mode which was previously stored.

GLOSSARY

Scrolling

TS - Travelstore

Moves you through a directory.

Automatically stores the radio stations with

the strongest reception signals, can be re-

trieved by pressing the station preset buttons.

Very useful on trips.

SIM card - Subscriber Identification Module

For radio and telephone operation. The SIM

card used here is in credit-card format. It is

also possible to use the small SIM card (plug-

in card) with an adapter card.

The SIM card contains all of the data required

to identify the subscriber, to allocate the tel-

ephone number and the personal phone

book.

User group

It is possible to limit the use of the telephone

to a certain group of users. Your network op-

erator/service provider can provide more de-

tailed information.

SMS - Short Message Service

Using this function it is possible to send other

subscribers messages up to 160 characters

in length, even if the recipient’s cellular phone

is not switched on or a call cannot be put

through at the present time.

The text is stored in the network until the re-

cipient retrieves it or the time allowed by the

sender expires.

Speed-dial

This function allows you to dial telephone

numbers at the touch of a button.

SRC - Source

Switches audio source between radio, CD

changer and AUX. Returns the system from

telephone to radio operation.

TA - Traffic Announcement (priority for traffic

messages)

“TA” in the display indicates that traffic an-

nouncement priority is switched on.

TP - Traffic Program

“TP” in the display indicates that the radio is

currently tuned into a radio station which

broadcasts traffic information.

Subject to modifications!

Service numbers

Country:

Phone:

Fax:

WWW:

Germany

(D)

0180-5000225

05121-49 4002

http://www.blaupunkt.com

Austria

(A)

(B)

01-610 390

02-525 5454

01-610 393 91

02-525 5263

44-898 644

09-435 99236

01-4010 7320

01-89583 8394

01-576 9473

01-4598830

02-369 6464

40 2085

Belgium

Denmark

Finland

France

(DK) 44 898 360

(FIN) 09-435 991

(F)

01-4010 7007

Great Britain (GB) 01-89583 8880

Greece

Ireland

Italy

(GR) 0800-550 6550

(IRL) 01-4149400

(I)

02-369 6331

40 4078

Luxembourg (L)

Netherland

Norway

Portugal

Spain

(NL)

023-565 6348

66-817 000

01-2185 00144

902-120234

08-7501500

023-565 6331

66-817 157

01-2185 11111

916-467952

08-7501810

01-8471650

(N)

(P)

(E)

(S)

Sweden

Switzerland (CH) 01-8471644

Czech. Rep. (CZ)

02-6130 0441

01-333 9575

0800-118922

02-6130 0514

01-324 8756

022-8771260

Hungary

(H)

Poland

(PL)

Turkey

USA

(TR)

0212-3350677

0212-3460040

708-6817188

(USA) 800-2662528

Brasil

(Mercosur)

(BR) +55-19 3745 2769 +55-19 3745 2773

Malaysia

(Asia Pacific) (MAL) +604-6382 474

+604-6413 640

Blaupunkt GmbH

02/01 TRO

CM/PSS2 - 8 622 402 456 (GB)

Bifinett Coffeemaker KH 600 User Manual
Bissell Vacuum Cleaner 1672 User Manual
Black Box Computer Hardware LHC201A User Manual
Black Decker Chainsaw RO410 User Manual
Bodum Wok K0810 User Manual
Braun Electric Shaver BS 8795 User Manual
Briggs Stratton Vacuum Cleaner 5631 User Manual
Campbell Hausfeld Welder WF2050 User Manual
Carrier Furnace 58TUA User Manual
Channel Plus Home Theater Server 9511BID Bamp;W User Manual