TM
Easy Design Speaker
Models HS15EZ
HS15EZW
Speaker Layout
Figure 1
HORN SPEAKER
START
C
The layout of the speakers should be planned prior
Row 1
to installation. Desired mounting height, barring
obstructions, is 15 to 20 feet, with the speakers
angled downward toward the listening area and
facing in the same direction.
A
Row 2
Layout starts in one corner of the area (see Figure
1).The first speaker in Row 1 should be positioned
a distance equivalent to (A) (see Figure 2) from the
corner based on the noise level of the area. The
next speaker in Row 1 should be a distance equiv-
alent to (B) (see Figure 2) from the first speaker.
Each additional speaker in the row should use this
same spacing.
B
Row 3
Row 4
Row 2 starts a distance equivalent to (C) (see
Figure 2) from Row 1, and, like Row 1, each speak-
er should be a distance apart equivalent to (B).
Row 3 starts a distance equivalent to (C) from
Row 2. Continue this pattern of alternating rows
until the area is appropriately covered.
For areas that include high shelving or corridors,
speakers should be installed so that they project
down the aisles between the shelves or down
through the corridors.
Figure 2
PLACEMENT
A
B
C
Volume Setting
High Noise
(75dB-85dB)
50 ft. 100 ft.
60 ft. 1/2 Rotation
The spacing of the speakers can be adjusted so
that the speakers are evenly spaced in a row.
Very High Noise
(85dB-95dB)
30 ft. 65 ft.
40 ft. Full Clockwise
NOTE: Each environment is unique.This layout
plan is general in nature and may not be
applicable for every installation.
Specifications subject to change without notice.
© 2000 Bogen Communications Inc. All rights reserved.
Part No. 54-5072-01r2 Printed in Korea 0100
|