Cecilware Fondue Maker CMS24M User Manual

ELECTRIC COUNTER TOP  
CHEESEMELTER  
OPERATION MANUAL  
CMS24Q  
CMS24M  
CMS24Q Shown  
CECILWARE CORPORATION  
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295  
718-932-1414  
FAX 718-932-7860  
NN54A 5/05  
 
Introduction  
Congratulations on the purchase of your Cecilware Cheesemelter. Please take time to carefully read  
through this manual to ensure the machine is operated and maintained properly. This will enable the best  
possible performance from this product for many years.  
Cecilware will not accept liability for the following if:  
*The instructions in this manual have not been followed correctly.  
*Non-authorized personnel have tampered with the machine.  
*Non-original spare parts are used.  
*The machine has not been handled and cleaned correctly.  
Packaging  
Cecilware prides itself on quality and service, ensuring that at the time of packing all products are  
supplied fully functioning and free of damage.  
Provided in this package are the following:  
* Cheesemelter  
* Crumb Trays  
* Grilling Rack  
* Manual  
Should you find any damage that has occurred in transit, please contact your Cecilware dealer  
immediately.  
Installation  
Remove the Cecilware Cheesemelter from the packaging. Be certain that all protective plastics and  
residues are thoroughly cleaned from its surface.  
Place the Cecilware Cheesemelter on a firm level surface.  
Local standards and regulations should be consulted in order to abide by standards set in relation to  
positioning, spacing, and ventilation.  
Caution:  
Do not position and operate near combustible materials/flammable objects. Once the Cheesemelter has  
been placed in position, ensure the upper and lower stainless steel trays are positioned correctly.  
Supply the appropriate power and connect to source. The Cheesemelter is now ready to turn on and  
operate. (For power supply, please see technical specification sheet, page 10).  
Operation  
The Cecilware Cheesemelter has upper and lower elements which can be used together or alternatively;  
the top element can be used on its own. This can provide flexibility when toasting and grilling.  
The toaster is also fitted with a timer and a thermostat which allows cooking continuously or by time.  
Please see next page for further details.  
2
 
Cooking By Time  
Select the style of toasting/grilling by selecting both elements or alternatively select the upper element by  
pressing the element control switch. Adjust the timer dial to the desired time of cooking. When the time is  
selected, the elements will automatically be activated at full power; when the time has lapsed, the  
elements will automatically switch off. For this cooking method ensure the thermostat is turned off.  
*Note: If the elements are not required to turn off completely, adjust the thermostat dial to low; this will  
keep the elements on after the time has lapsed. This will help to keep the product warm and will also  
allow for faster reheat when required.  
Continuous Cooking  
Select the style of toasting/grilling by selecting both elements or alternatively select the upper element by  
pressing the element control switch.  
When cooking continuously, be sure the timer dial is turned off. Using the thermostat dial, select the  
desired temperature. When selected, the elements will automatically switch on; when finished, turn the  
thermostat dial off. The timer will over ride the energy regulator if it is not turned off.  
*Summary: Time Control - provides full power to elements for the selected period of time.  
The thermostat control provides the desired heat control setting for continuous operation when the timer  
is off.  
*Note: When in operation, the Cheesemelter will be hot; part of unit is the grilling rack which is handled  
regularly. This rack is made from steel and will hold heat; therefore, protective gloves must be worn for  
protection when handling.  
Cleaning, Care and Maintenance  
Switch off the power and disconnect from the power source.  
The Cheesemelter should be cleaned after each day’s operation; however, the unit may require more  
frequent cleaning, depending on the volume of production.  
Allow the Cheesemelter to cool before cleaning. Remove upper and lower trays and wash them in  
warm soapy water; be sure to dry before returning them to the unit.  
The remainder of the Cheesemelter can be cleaned with a damp cloth using hot, soapy water.  
Do not immerse completely in water or use hose to clean.  
Warm soapy water is recommended for cleaning; prolonged use of cleaning agents may cause damage  
to stainless steel.  
3
 
Safety  
Cecilware Qualified Service Technician should carry out repairs if necessary. Do not remove any  
components or service panels on this product  
When cleaning, switch power off and disconnect from the outlet. If the power cord is damaged, it must  
be replaced by a Cecilware Recommended Qualified Service Technician in order to avoid a hazard.  
Allow the Cheesemelter to cool down after use before dismantling for cleaning; the unit will still be too hot  
to handle immediately after use.  
Trouble Shooting  
If your Cecilware Cheesemelter does not operate, please check the following before placing a service  
call.  
CMS24Q, CMS24M  
Top Cheesemelter  
Problem  
Cause  
Remedy  
1. Mains power supply  
1. Check mains power supply  
2. Check that the unit is correctly  
plugged in and turned on;  
ensure you have read the  
manual for both methods of  
operation:  
2. Unit is not switched on  
¾ Timer Control: provides full  
power to the elements for the  
period of time selected  
¾ Dial Control: provides desired  
heat for continued operation when  
the timer is off  
The unit is not working, the  
indicator light is not on.  
3. Fuse in the plug has 3. Replace the fuse in the plug with  
blown correctly rated fuse  
4. Dial Control or Timer 4. Call service agent or qualified  
are faulty technician  
5. Plug and lead are 5. Call service agent or qualified  
damaged  
technician  
6. Call service agent or qualified  
technician  
6. Internal wiring fault  
The unit is heating but the 1. The indicator light is 1. Call service agent or qualified  
indicator lights are not on. faulty technician  
4
 
Trouble Shooting Cont…  
Problem  
Cause  
Remedy  
1. Ensure that you have clearly  
read the manual, fully taking into  
account whether the unit has  
been selected for Timer Control  
or for Dial Control and also  
whether single or double  
element heating has been  
selected  
1. Incorrect operation  
Slow heat up or no heat  
up, power is on.  
2. Call service agent or qualified  
technician  
2. Elements are faulty  
3. Power dial is faulty  
3. Call service agent or qualified  
technician  
Please ensure:  
* There is correct power supply.  
* The machine is plugged in correctly and power is switched on.  
* The timer and thermostat are in the correct position.  
* The elements are clear of any food waste.  
Note: All Cecilware products are tested prior to packing.  
Compliance  
Cecilware products have undergone strict product testing in order to comply with regulatory standards  
and specifications set by international, independent, and federal authorities.  
As testimony to such compliance, Cecilware products carry the following marks/symbols:  
5
 
Electrical Diagram  
Model: CMS24Q  
E
L
N
240V  
on/off  
switch  
pilot light  
top elements  
timer  
thermostat  
pilot light  
L
selector  
switch  
bottom elements  
PILOT  
N
LOAD  
CMS24M  
E
N
240V  
on/off  
switch  
pilot light  
thermostat  
PILOT  
pilot light  
L
N
LOAD  
The above circuit diagram has been provided to assist qualified technicians. A Recommended Qualified  
Service Technician should carry out repairs if needed. Do not remove any components or service  
panels on this product.  
6
 
Explosion View  
CMS24M  
16  
15  
2
3
14  
1
13  
12  
11  
4
10  
9
8
5
7
6
7
 
CMS24Q  
15  
16  
14  
1
2
13  
3
12  
11  
4
10  
9
8
5
7
6
8
 
Spare Parts List  
NO.  
DESCRIPTION  
QTY  
8
Part NO.  
08010  
08019  
08047  
NA  
HEATING ELEMENT (METAL)  
HEATING ELEMENT (QUARTZ)  
CORD & PLUG  
SIDE PANEL  
1
6
2
3
1
2
4
INSULATION  
2
NA  
5
INSULATION CLAMP  
FEET  
1
NA  
6
4
08031  
NA  
7
BASE PLATE  
1
8
ENERGY SWITCH  
DIAL  
1
08011  
08012  
08013  
08014  
08015  
08054  
08016  
08039  
08077  
9
2
10  
11  
12  
13  
14  
15  
16  
TIMER  
1
HEATING SELECTION SWITCH  
PILOT LIGHT  
1
2
ON/OFF SWITCH  
GRILL RACK  
1
1
CRUMB TRAY  
2
CERAMIC TUBE  
8
*NA = not available except by special order.  
9
 
Specifications  
CECILWARE  
MODEL  
POWER DIMENSIONS (INCHES)  
VOLTAGE  
ELEMENT  
(Watts)  
W×D×H  
CMS24Q  
CMS24M  
2400  
2400  
23 1/2”×13 1/4”×12 3/4”  
23 1/2”×13 1/4”×12 3/4”  
QUARTZ  
METAL  
240V  
~
50/60HZ  
10  
 
CECILWARE CORPORATION  
43-05 20th AVENUE, LONG ISLAND CITY, NEW YORK 11105-1295 ■  
718-932-1414  
FAX 718-932-7860  
11  
 

Black Decker Trimmer GLC120 User Manual
Black Decker Vacuum Cleaner VC2600 User Manual
Blaupunkt Car Stereo System C73 User Manual
Blaupunkt Car Stereo System CM 127 User Manual
Boss Audio Systems Portable Multimedia Player RE 1000 User Manual
Cal Flame Hot Tub Spa Wrap User Manual
Campbell Hausfeld Network Card SDM CD16AC User Manual
Candy Dishwasher CDI 1010 User Manual
Carrier Furnace 58MVC User Manual
Cisco Systems Cable Box 4540HDC User Manual